This thesis covers brand new detached indoor pool with one underground and one above ground floor, which is designed for a maximum capacity of 120 people, with two swimming pools, a children's swimming. The building is designed with a flat rectangular roof insulation. Envelopes are ventilated, insulated, bearing part consists of reinforced concrete. The pool hall make up the majority of the building envelope glass facade. Facilities for employees is located on the first basement floor. All technologies for cleaning pool water, air conditioning, boiler, facilities for maintenance are located on the first basement floor. Chimneys are stainless steel, placed on the outside of the building. The finish floors are ceramic tile. Pool bath is designed as a so-called white bathtub. The supporting structure of the ceiling above the pool hall beams are post-tensioned concrete.

Newly built Wellness hotel. The building is partially basement. The building has three parts. The central part is made of reinforced concrete skeleton and has five aboveground floors. This part serves as the main entrance hall and staircase. The side tracts have four aboveground floors and their support system is a transverse wall, brick, from the system Porotherm. In the basement there is a swimming pool and hotel facilities. There is located a restaurant too. On the second floor there are rooms, a gym and services. On the top floor there are only hotel rooms. The building is based on thecontinous footings. Roofing is made arched trusses.

This thesis was prepared as an architectural study. In front of his graduate-seminar was a study on urban concept and the building Aquapark Brno - Zidenice hillside snakes. This thesis deals with the extension of the complex of Roman baths and sauna world. This is a two-storey building without a basement cubic shape. The proposal emphasizes the functionality of the service, interior design of the building and the overall expression

The thesis is focused on determining the energy flows and the creation of an internal microclimate swimming pool halls. It describes the problems of design, the potential risks associated with the use of pools and thermodynamic processes heat and mass transfer. For this purpose was developed simulation program, which examines the behavior of heat and humidity in the room depending on external factors. The room can be simulated for any time period and geographic location. The outputs of the simulation are heat and mass balance, which will be covered air condition units. Three variants were designed and optimized solutions comparing claims on their operations. The experimental part is focused on the evaporation of the water. Measurement examines dependence of the speed of evaporation of water at different boundary conditions. Was investigated temperature dependence of water, temperature and relative humidity and air velocity above the water surface.

This dissertation covers the application of heat accumulation systems in nuclear power engineering, namely in nuclear power plants. It is mainly a case of passive emergency systems, whose task is to accumulate the heat produced in the reactor’s active zone and in spent fuel pools during DBA (design-basis accidents) or beyond DBA. A particular example of heat accumulation is steam condensation after LOCA (loss of coolant accident). The primary circuit steam leakage increases containment pressure and has to be decreased by the steam condensation. This thesis deals with a theoretical substitute for ice condensers, which are used as a passive safety measure in some nuclear power plants. The substitute involves a choice of an alternative material, whose melting temperature (for heat accumulation) is closer to nuclear power plant operating temperatures. The other part of the dissertation discusses heat accumulation in spent fuel pools in case of all cooling systems failure.

The master thesis focuses on problems connected with the life cycle cost of property owned by the city. It analyses general issues of the life cycle cost of construction, but it mainly analyses the ways in which local authorities manage their properties and their cost. Those methods are applied in a case study, that addresses the cost and management of swimming pool sites which are owned by the city Brno.

Diploma Thesis “Wellness centre“ is processed in the form of detailed project documentation which contains all requirements in accordance with applicable standards and regulations. The proposed design of the object is a three-storey building. The building will serve as a place for relaxation and sport. Technical facilities, staff room, changing rooms and fitness centre are located in the basement. The café and wellness is situated in 1PP. The offices for administration of the building, massage rooms, tanning salon, changing rooms and fitness hall are located in the 2nd floor. The building is based on foundation footings and load bearing walls are based on foundation strips. Support system of the building is a combined construction system of the walls and columns.

The subject of this thesis is to create a project documentation of the design of the new development, a boarding house with a restaurant and wellness centre. The object is designed as a detached building with two floor and wine cellar. The first floor above ground contains a restaurant and wellness centre. On the second floor there are 14 rooms for rent. The object foundation base are foundation strips. The load-bearing structure is a clay masonry and prestressed concrete floor slabs Spiroll. The object is roofed with a flat green roof. The drawing is processed with help of AutoCAD software.

The proposed leisure center building Rowing Club bellows is located in southern part of the Brněnské přehrady between section Rakovec and Kozí horka. The building stands on existing club Lodní sporty Brno in the parcel čp. 1236. The idea of building is a ship sailing on the mainland, whose sails it look like waves. Student accommodation is designed to the second, third and fourth floor. Restaurant and administrative facilities connected to the terrace is designed in the basement. In the first underground floors are designed locker rooms, athletic facilities, kitchen and in the second underground floors is designed rowing pools and rowing boatyards connected to the ground. On the eastern side is a wooden rack tribune. Roads and pavements around the building are designed with simplicity and function.

Knowledge of a country's national geopolitics is the key to understanding the state in all its political forms. Therefore, this thesis is devoted to the Ukrainian geopolitics of the 20th - 21st century. In it we described the main concepts and opinions of Ukrainian geopoliticians. Our goal was to learn more about the theoretical foundations of Ukrainian geopolitics as it was in the 20th century and to see its further development in the 21st century. We tried to describe as fully as possible the views of Ukrainian geopoliticians and note the peculiarities of their thinking. We also analysed possible factors influencing the geopolitical vision of Ukrainians in the 20th and 21st centuries. This thesis is divided into three major parts and conclusions. The first chapter presents the main geopolitical concepts that emerged in the first half of the 20th century and their classification. In the second chapter, we focused more on those concepts that concerned the Black Sea region. In the third chapter, we presented the main and interesting concepts of Ukrainian geopolitics of the 21st century. Conclusions are an important analytical element of our work