As nanocomposites provide considerable improvements in material properties, scientists and engineers are focussing on biodegradable nanocomposites having superior material properties as well as degradability. This thesis has investigated the properties of biodegradable nanocomposites of the aliphatic thermoplastic polyester, poly (lactide acid) (PLA) and the synthetic biodegradable polyester, poly (butylene succinate) (PBS). To enhance the properties of this blend, nanometer-sized clay particles, have been added to produce tertiary nanocomposite. High aspect ratio and surface area of clay provide significant improvement in structural, mechanical, thermal and barrier properties in comparison to the base polymer. In this study, a series of PLA/PBS/layered silicate nanocomposites were produced by using a simple twin-screw extruder. PLA/PBS/Cloisite 30BX nanocomposites were prepared containing 1, 3, 5, 7 and 10 wt% of C30BX clay, while PLA and PBS polymers compositions were fixed at a ratio of 80 to 20. This study also included the validation of a gas barrier model for these biodegradable nanocomposites. WAXD indicated an exfoliated structure for nanocomposites having 1 and 3 wt% of clay, while predominantly development of intercalated structures was noticed for nanocomposites higher than 5 wt% of clay. However, TEM images confirmed a mixed morphology of intercalated and exfoliated structure for nanocomposite having 1 wt% of clay, while some clusters or agglomerated tactoids were detected for nanocomposites having more than 3 wt% of clay contents. The percolation threshold region for these nanocomposites lied between 3-5 wt% of clay loadings. Liquid-like behaviour of PLA/PBS blends gradually changed to solid-like behaviour with the increase in concentration of clay. Shear viscosity for the nanocomposites decreased as shear rate increased, exhibiting shear thinning non-Newtonian behaviour. Tensile strength and Young's modulus initially increased for nanocomposites of up to 3 wt% of clay but then decreased with the introduction of more clay. At high clay content (more than 3 wt%), clay particles tend to aggregate which causes microcracks at the interface of clay-polymer by lowering the polymer-clay interaction. Percentage elongation at break did not show any improvement with the addition of clay. PLA/PBS blends were considered as immiscible with each other as two separate glass transition and melting temperatures were observed in modulated differential scanning calorimetry (MDSC) thermograms. MDSC showed that crystallinity of the nanocomposites was not much affected by the addition of clay and hence some compatibilizer is required. Thermogravimetric analysis showed that the nanocomposite containing 3 wt% of clay demonstrated highest thermal stability compared to other nanocomposites. Decrease in thermal stability was noticed above 3 wt% clay; however the initial degradation temperature of nanocomposites with 5, 7 and 10 wt% of clay was higher than that of PLA/PBS blend alone. Gas barrier property measurements were undertaken to investigate the transmission of oxygen gas and water vapours. Oxygen barrier properties showed significant improvement with these nanocomposites, while that for water vapour modest improvement was observed. By comparing the relative permeabilities obtained from the experiments and the model, it was concluded that PLA/PBS/clay nanocomposites validated the Bharadwaj model for up to 3 wt% of clay concentration.

<p>The acceptance of blood contacting implants creating favorable conditions <i>in vivo</i> is decisively determined by their interaction with proteins that mediate inter cellular interactions with synthetic substrates. Adsorbed proteins can activate blood cascade systems like coagulation and complement that may result in serious blood clots, and/or immunological reactions. Poly (ethylene glycol) (PEG), heparin, and phosphoryl choline (PC) functional poly (methacrylates) are previously used polymers with known non-adhesive properties in blood contacting events.</p><p>This thesis contributes to this extensive research by introducing a novel type of biomaterial that equips biodegradable polymers with biomimetic functionalities. The phospholipid mimetic material is synthesized by combining biodegradable polymers with various functional polar end-groups consisting of zwitterionic phosphoryl choline (PC), anionic succinates, and cationic quaternary ammonium. The polymer backbone provides mechanical stability and biodegradability whilst the various head groups provide a variety of functions. The careful evaluation of the synthesis has allowed reaction conditions to be optimized leading to complete conversion at each step and subsequently high yields. Initially, poly (e-caprolactone) (PCL) was used since it provided a suitable synthetic starting point. However, the synthesis has also included poly (trimethylene carbonate) (PTMC) to provide a material that allows spontaneous surface enrichment of the polar PC group. This was achieved with an added hydrophilic environment. </p><p>Through the synthesis of multi PC functional PTMC, additional bulk organisation by the formation of zwitterionomers (PC ionomer) was achieved. Low modulus elasticity and water uptake were some of the properties of the formed material. As a result it was shown that the PC ionomer could be used for protein/drug loading and subsequent release. Furthermore, the material possessed non-adhesive properties in different biological environments.</p><p>Importantly, the result suggests that a versatile synthetic platform has been established that may provide a smorgasbord of different functional polymers, or combinations of such. This is indeed important since it was shown that the polymer in many ways dictates how the material may take advantage of an added functionality. </p><p>Such materials should be interesting for a variety of biomedical applications including the production of soft hemocompatible tissue.</p>

<p>The interactions between polymers and components of biological systems are an important area of interest within the fields of tissue engineering, polymer chemistry, medicine and biomaterials. In order to create such a biomimetic material, it must show the inherent ability to reproduce or elicit a biological function. How do we design synthetic materials in order to direct their interactions with biological systems?</p><p>This thesis contributes to this research with aspects of how polymers interact with biological materials with the help of ionic interactions. Polyesters, biodegradable or not, may after a hydrolytic cleavage interact ionically with protonated amines by the liberated carboxylate functions. Amines are found in proteins and this fact will help us to anchor proteins to polyester surfaces. Another type of interaction is to culture cells in polymeric materials, i.e. scaffolds. We have been working on compliant substrates, knitted structures, to allow cell culture in three dimensions. A problem that arises here is how to get a high cell seeding efficiency? By working on the interactions between polymers, proteins and finally cells, it is possible to create a polarized protein membrane that allows for very efficient cell seeding, and subsequent three dimensional cell cultures. Finally a synthetic route to taylor interaction was developed. Here a group of polymers known as ionomers were synthesized. In our case ionic end groups have been placed onto biodegradable polycarbonates, we have created amphiphilic telechelic ionomers. Functionalization, anionic or cationic, changes the properties of the material in many ways due to aggregation and surface enrichment of ionic groups. It is possible to add functional groups for a variety of different interactions, for example introducing ionic groups that interact and bind to the complementary charge of proteins or on the other hand one can chose groups to prevent protein interactions, like the phosphorylcholine zwitterionomers. Such interactions can be utilized to modulate the release of proteins from these materials when used in protein delivery applications. The swelling properties, Tg, degradation rate and mechanical properties are among other things that will easily be altered with the choice of functional groups or backbone polymer.</p>

The present work describes a selection of strategies for the synthesis of functional aliphatic polycarbonates. Using an end-group functionalization strategy, a series of DNA-binding cationic poly(trimethylene carbonate)s was synthesized for application as vectors for non-viral gene delivery. As the end-group functionality was identical in all polymers, the differences observed in DNA binding and in vitro transfection studies were directly related to the length of the hydrophobic poly(trimethylene carbonate) backbone and the number of functional end-groups. This enabled the use of this polymer system to explore the effects of structural elements on the gene delivery ability of cationic polymers, revealing striking differences between different materials, related to functionality and cationic charge density. In an effort to achieve more flexibility in the synthesis of functional polymers, polycarbonates were synthesized in which the functionalities were distributed along the polymer backbone. Through polymerization of a series of alkyl halide-functional six-membered cyclic carbonates, semicrystalline chloro- and bromo-functional homopolycarbonates were obtained. The tendency of the materials to form crystallites was related to the presence of alkyl as well as halide functionalities and ranged from polymers that crystallized from the melt to materials that only crystallized on precipitation from a solution. Semicrystallinity was also observed for random 1:1 copolymers of some of the monomers with trimethylene carbonate, suggesting a remarkable ability of repeating units originating from these monomers to form crystallites. For the further synthesis of functional monomers and polymers, azide-functional cyclic carbonates were synthesized from the bromo-functional monomers. These were used as starting materials for the click synthesis of triazole-functional cyclic carbonate monomers through Cu(I)-catalyzed azide–alkyne cycloaddition. The click chemistry strategy proved to be a viable route to obtain structurally diverse monomers starting from a few azide-functional precursors. This paves the way for facile synthesis of a wide range of novel functional cyclic carbonate monomers and polycarbonates, limited only by the availability of suitable functional alkynes.

A strategic research area today is development of polymericproducts made from renewable sources. The ways of utilizingrenewable sources studied in this thesis are using 1)prepolymers obtained by steam treatment of wood and 2) monomersobtainable by fermentation of agricultural products. Novel hemicellulose-based hydrogels were prepared by usingprepolymers obtained from steam treatment of spruce.Hemicellulose was first modified with well-defined amounts ofmethacrylic functions. Hydrogels were then prepared by radicalpolymerization with 2-hydroxyethyl methacrylate orpoly(ethylene glycol) dimethacrylate to form hydrogels. Theradical polymerization reaction was carried out in water usinga redox initiator system. The hydrogels were in generalelastic, soft and easily swollen in water. Frequency sweeptests indicated that the hydrogel system displayed prevailingsolid-like behavior. Comparison of the hemicellulose-basedhydrogels with pure poly(2-hydroxyethyl methacrylate)-basedhydrogels showed that it was possible to preparehemicellulose-based hydrogels with properties similar to thoseof pure poly(2-hydroxyethyl methacrylate)-based hydrogels. Polyester-based materials were prepared by using themonomers 1,3- propanediol and succinic acid obtainable byfermentation. α,ω-Dihydroxyterminatedoligomeric polyesters produced by the thermal polycondensationof 1,3-propanediol and succinic acid were chain-extended toobtain sufficiently high molecular weight. Depending on thechain-extension technology adopted, poly(ester carbonate)s orpoly(ester urethane)s were obtained. In the case of poly(estercarbonate)s, the chain-extended products ofα,ω-dihydroxyterminated oligomeric copolyesters werealso produced using 1,3-propanediol/1,4-cyclohexanedimethanol/succinic acid mixtures toimprove thermal and mechanical properties. Segmented poly(esterether carbonate)s fromα,ω-dihydroxyterminated oligo(propylenesuccinate)s and poly(ethylene glycol) were also synthesized toincrease the hydrophilicity. Molecular weights and polydispersity were analyzed by SECfor all materials. Their structures were also identified by NMRspectroscopy (1H NMR and 13C NMR). All characterizations werein agreement with the proposed structures. Thermal parameterswere characterized by DSC. Tensile testing anddynamic-mechanical tests were performed and in additionpreliminary processing trials were carried out in some cases.The results demonstrate the feasibility of using monomersderived from renewable sources to build up new polymericstructures endowed with a variety of physical and mechanicalproperties.

The acceptance of blood contacting implants creating favorable conditions in vivo is decisively determined by their interaction with proteins that mediate inter cellular interactions with synthetic substrates. Adsorbed proteins can activate blood cascade systems like coagulation and complement that may result in serious blood clots, and/or immunological reactions. Poly (ethylene glycol) (PEG), heparin, and phosphoryl choline (PC) functional poly (methacrylates) are previously used polymers with known non-adhesive properties in blood contacting events. This thesis contributes to this extensive research by introducing a novel type of biomaterial that equips biodegradable polymers with biomimetic functionalities. The phospholipid mimetic material is synthesized by combining biodegradable polymers with various functional polar end-groups consisting of zwitterionic phosphoryl choline (PC), anionic succinates, and cationic quaternary ammonium. The polymer backbone provides mechanical stability and biodegradability whilst the various head groups provide a variety of functions. The careful evaluation of the synthesis has allowed reaction conditions to be optimized leading to complete conversion at each step and subsequently high yields. Initially, poly (e-caprolactone) (PCL) was used since it provided a suitable synthetic starting point. However, the synthesis has also included poly (trimethylene carbonate) (PTMC) to provide a material that allows spontaneous surface enrichment of the polar PC group. This was achieved with an added hydrophilic environment. Through the synthesis of multi PC functional PTMC, additional bulk organisation by the formation of zwitterionomers (PC ionomer) was achieved. Low modulus elasticity and water uptake were some of the properties of the formed material. As a result it was shown that the PC ionomer could be used for protein/drug loading and subsequent release. Furthermore, the material possessed non-adhesive properties in different biological environments. Importantly, the result suggests that a versatile synthetic platform has been established that may provide a smorgasbord of different functional polymers, or combinations of such. This is indeed important since it was shown that the polymer in many ways dictates how the material may take advantage of an added functionality. Such materials should be interesting for a variety of biomedical applications including the production of soft hemocompatible tissue.

Chitosan, Whey Protein Isolate (WPI) and vital wheat gluten (WG) are three biomaterials that have quite promising properties for packaging purposes. They have good film forming properties and good gas barrier properties in dry conditions. Moreover, because they are produced from industrial waste of food processing, they offer an ecological advantage over polymers made from petroleum. However, their physicochemical characteristics still must be improved for them to be of commercial interest for the food packaging industry. The purpose of this work was to study different strategies aiming to improve the water resistance and aging properties of these polymers, which are some of the key disadvantages of these materials. The produced solution cast chitosan and WPI films were characterised with scanning electron microscopy (SEM), density measurements and thermogravimetry. The water vapour transmission rate was determined at a relative humidity of 11%. In the first part, mechanical properties of solid films and seals were assessed by tensile testing. WG film’s tensile properties and oxygen and water vapour permeabilities were measured as a function of aging time. The changes in the protein structure were determined by infrared spectroscopy and size-exclusion high-performance liquid chromatography and the film structure was revealed by optical and scanning electron microscopy. Gluten-clay nanocomposites were characterised by tensile testing, X-ray diffraction and transmission electron microscopy. The incorporation of a hydrophobic biodegradable polymer, poly ( ε-caprolactone), PCL, in both chitosan and whey protein, yielded a significant decrease in water vapour transmission rate. It was observed that a certain amount of the PCL particles were ellipsoidal in chitosan and fibrous in WPI. The obtained data also indicated that the particle shape had an important influence in the water vapour transmission rate. In the second part, the aging properties of WG films, plasticized with glycerol and cast from water/ethanol solutions with pH=4 or pH=11 were investigated. WG films made from alkaline solutions were mechanically more time-stable than the acidic ones, the latter being initially very ductile but turning brittle towards the end of the aging period. The protein solubility measurements indicated that the protein structure of the acidic films was initially significantly less aggregated than the in basic films. During aging the acidic films lost more mass than the basic films through slow evaporation of volatiles (water/ethanol) and through migration of glycerol to the paper support. The oxygen permeability was also lower for the basic films. In the last part, the properties of new and aged glycerol-plasticized WG films at acidic and basic conditions containing ≤4.5 wt% natural or quaternary-ammonium-salt-modified montmorillonite were studied. Films of WG with montmorillonite were possible to produce by solution casting. The aging rate of acidic and basic films was unaffected by the incorporation of clay. However, the large reduction in water vapour permeability for most systems suggested that the clay sheets were evenly distributed within the films. The film prepared from basic solution and containing natural clay was almost completely exfoliated as revealed by transmission electron microscopy and X-ray diffraction. The best water vapour barrier properties were obtained by using modified clay. / QC 20101013

The search for alternatives to the fossil-based products has dramatically surged during past few decades primarily due to the problems associated with the scarcity of these sources and global environmental concerns. Among those many alternatives, exploitation of cellulose, as a raw material to develop novel products has been a constant attempt since it has never lost its both economic and industrial impact. Cellulose is known for its significant contribution as a raw material and as a fascinating sustainable macromolecule, which exhibits wide availability and versatile chemical reactivity to discover novel derivatives for broad range of applications. Conversion of cellulose C2/C3 secondary hydroxyl groups to dialdehyde groups in the presence of periodate is an extremely useful method for regioselective oxidation of cellulose and to activate the polymer for further derivatization. This thesis is primarily focused on synthesis and characterization of wide range of cellulose derivatives exploiting facile periodate oxidation methodology. The first study investigated the use of periodate oxidation as a potential method to synthesize a novel water soluble derivative of cellulose from bleached hardwood Kraft pulp. The work focused on the effect of periodate oxidation and sulfonation reaction on water solubility, morphology and structure of cellulose fibers. The results showed a significant increase in water solubility (2.85 -28.5 g/L) and complete change in surface morphology of the fibers due to the introduction of sulfonic acid groups. In the second study, the same reaction scheme was employed on bead cellulose to prepare anionic 2,3-disulfonated beads. Due to the presence of negatively charged sulfonic acid groups, the beads were found to be agglomerated in presence of cationic starch, exhibiting their future application in chromatographic separation. In the third study, model primary amine compounds such as methyl and butyl amines were grafted to nanowhisker surfaces following periodate oxidation and reductive amination. Then, based on the grafting procedure, in the following study, gamma aminobutyric acid (spacer) and syringyl alcohol (linker) was attached to periodate oxidized nanowhiskers to synthesize a novel drug delivery system. The final study investigated the application of periodate oxidized nanowhiskers as chemical cross-linkers to stabilize gelatin gels. It was concluded that the chemical cross-linking has a significant effect on relative increase in percentage of rigid protons, reduced water uptake ability and reduced pore size of the gels. Not only did the chemical cross-linking improve the storage modulus of the gels (150%) and but it also increased the thermal resistance until 50 oC.

In the present work, a study of the preparation of new formulations of acrylic bone cements (ABC) has been carried, to obtain materials with capacity for controlled drug delivery of medicaments useful in the therapeutic treatment of osteoporosis. The main research line has been focused on the partial modification of the solid phase of the conventional formulation of ABC, by substituting part of the PMMA beads with different microparticles of synthetic as well as natural biodegradable polymers. The incorporation of these polymers to the conventional formulation, with a structure based on PMMA, has been focused on two well defined points of view: as a structural component, and as a model component to study its delivery from the material to the external medium, to determine the capacity of the formulation for drug delivery. The work was finished with the evaluation of the capacity of controlled release of proteins and the determination of biocompatibility. / En este trabajo se ha llevado a cabo el estudio de nuevas formulaciones de cementos óseos acrílicos (COA) para su posterior evaluación como sistema de liberación controlada de medicamentos útiles en el tratamiento terapéutico de la osteoporosis. El trabajo se ha fundamentado en la modificación parcial de la fase sólida de los COA, mediante la substitución parcial de las microesferas de PMMA, por diferentes micropartículas de polímeros biodegradables, tanto de naturaleza sintética como natural. La incorporación de estos polímeros a la formulación del COA convencional, cuya estructura polimérica básica es el PMMA, ha sido enfocada desde dos puntos de vista bien diferenciados: como un componente estructural, que aporta resistencia mecánica al material, o como un componente que nos permita determinar la capacidad de liberación de un fármaco como el Ibandronato o de una proteína modelo como el colágeno hidrolizado. Finalmente se ha evaluado la biocompatibilidad de los COA modificados.

The interactions between polymers and components of biological systems are an important area of interest within the fields of tissue engineering, polymer chemistry, medicine and biomaterials. In order to create such a biomimetic material, it must show the inherent ability to reproduce or elicit a biological function. How do we design synthetic materials in order to direct their interactions with biological systems? This thesis contributes to this research with aspects of how polymers interact with biological materials with the help of ionic interactions. Polyesters, biodegradable or not, may after a hydrolytic cleavage interact ionically with protonated amines by the liberated carboxylate functions. Amines are found in proteins and this fact will help us to anchor proteins to polyester surfaces. Another type of interaction is to culture cells in polymeric materials, i.e. scaffolds. We have been working on compliant substrates, knitted structures, to allow cell culture in three dimensions. A problem that arises here is how to get a high cell seeding efficiency? By working on the interactions between polymers, proteins and finally cells, it is possible to create a polarized protein membrane that allows for very efficient cell seeding, and subsequent three dimensional cell cultures. Finally a synthetic route to taylor interaction was developed. Here a group of polymers known as ionomers were synthesized. In our case ionic end groups have been placed onto biodegradable polycarbonates, we have created amphiphilic telechelic ionomers. Functionalization, anionic or cationic, changes the properties of the material in many ways due to aggregation and surface enrichment of ionic groups. It is possible to add functional groups for a variety of different interactions, for example introducing ionic groups that interact and bind to the complementary charge of proteins or on the other hand one can chose groups to prevent protein interactions, like the phosphorylcholine zwitterionomers. Such interactions can be utilized to modulate the release of proteins from these materials when used in protein delivery applications. The swelling properties, Tg, degradation rate and mechanical properties are among other things that will easily be altered with the choice of functional groups or backbone polymer.