Chosen agricultural enterprise Agricultural-Trading Cooperative Farm operates 20 km away from České Budějovice in South Bohemia Region. Analysis of inner structure of this farm was performed for period 1997 {--} 2006. To project inner structure of the agricultural system, it is necessary to know the harvest area and yield of individual crops, cattle stock, and mineral fertilizer consumption. On the basis of performed analysis, using carbon-balance method, projects of inner structure specialized in bioenergy production were calculated. The production of bioethanol from cereals, oil from rape and biogas from cattle breeding refuse are taken into account. At comparison of individual variants from aspect of energetic gain under existing natural conditions, the variant specialized in cereals for ethanol production proves as the most suitable.

Cette thèse se compose de deux projets individuels et six chapitres, qui sont basées sur l'examen de la structure interne dentaire inférieure dentition postcanine dans un certain nombre de fossiles et modernes spécimens, à travers lesquels une étude approfondie a été effectuée à l'aide de micro-tomodensitométrie et ordinateur-outils de paleonanthropology assistée. Nous avons d'abord recensé et évalué la valeur taxinomique de l'épaisseur de l'émail et des modèles de distribution de l'épaisseur de l'émail 3D entier couronne dans un certain nombre des premiers membres du genre Homo en Afrique du Sud, et examiné dans le relavence taxonomique de EDJ morphologie long postcanine dentition, et discuté de la facteurs d'adaptation possibles / développement qui tiennent compte de la variation de la morphologie EDJ nous avons observé ici. Les trois premiers chapitres (Introduction, Matériel et méthodes) donnent un aperçu des objectifs de cette thèse, et d'examiner les études précédentes. En outre, ils fournissent une introduction détaillée des matières fossiles, les sites et un arrière-plan de la méthode assistée par ordinateur (micro-XCT) pour analyser la structure interne dentaire. Le chapitre des résultats comprend deux documents de recherche indépendants, dans les différentes étapes de soumission et de publication. Les résultats et les chapitres de discussion offrent un résumé détaillé de l'épaisseur de l'émail, EDJ morphométrie géométrique et 3D-EDJ variation métamérique entre les espèces, et de comparer les résultats avec un certain nombre d'études morphologiques et de développement, et de fournir une perspective d'étude future. Le dernier chapitre atteint des points décisifs de cette thèse, il met en évidence la valeur taxinomique des prémolaires EDJ, et met l'accent sur les caractéristiques de la mosaïque de la dentition des premiers membres du genre Homo sud-africaine. / This thesis consists of two individual projects and six chapters, which are based on the examination of dental inner structure of lower postcanine dentition in a number of fossil and modern specimens, through which a comprehensive study has been done using micro-computed tomography and computer-assisted paleonanthropology tools. We first documented and assessed the taxonomical value of enamel thickness and 3D whole-crown enamel thickness distribution patterns in a number of earliest members of the genus Homo in South Africa, and looked into the taxonomic relavence of EDJ morphology along postcanine dentition, and discussed the possible adaptive/developmental factors that account for the variation of EDJ morphology we observed here. The first three chapters (Introduction, Materials and Methods) provide an overview of the objectives of this thesis, and review previous studies. Also, they provide a detailed introduction of fossil materials, sites and a background of computer-aided method (micro-XCT) to analyze the dental inner structure. The Results chapter comprises of two independent research papers, in different stages of submission and publication. The Results and Discussion chapters offer an extensive summary of enamel thickness, EDJ geometric morphometrics and 3D-EDJ metameric variation between species, and compare the results with a number of morphological and developmental studies, and provide an outlook of future study. The last chapter reaches the conclusive points of this thesis, it highlights the taxonomical value of premolar EDJ, and emphasizes the mosaic features of the dentition of South African early Homo.

<p>The interactions between polymers and components of biological systems are an important area of interest within the fields of tissue engineering, polymer chemistry, medicine and biomaterials. In order to create such a biomimetic material, it must show the inherent ability to reproduce or elicit a biological function. How do we design synthetic materials in order to direct their interactions with biological systems?</p><p>This thesis contributes to this research with aspects of how polymers interact with biological materials with the help of ionic interactions. Polyesters, biodegradable or not, may after a hydrolytic cleavage interact ionically with protonated amines by the liberated carboxylate functions. Amines are found in proteins and this fact will help us to anchor proteins to polyester surfaces. Another type of interaction is to culture cells in polymeric materials, i.e. scaffolds. We have been working on compliant substrates, knitted structures, to allow cell culture in three dimensions. A problem that arises here is how to get a high cell seeding efficiency? By working on the interactions between polymers, proteins and finally cells, it is possible to create a polarized protein membrane that allows for very efficient cell seeding, and subsequent three dimensional cell cultures. Finally a synthetic route to taylor interaction was developed. Here a group of polymers known as ionomers were synthesized. In our case ionic end groups have been placed onto biodegradable polycarbonates, we have created amphiphilic telechelic ionomers. Functionalization, anionic or cationic, changes the properties of the material in many ways due to aggregation and surface enrichment of ionic groups. It is possible to add functional groups for a variety of different interactions, for example introducing ionic groups that interact and bind to the complementary charge of proteins or on the other hand one can chose groups to prevent protein interactions, like the phosphorylcholine zwitterionomers. Such interactions can be utilized to modulate the release of proteins from these materials when used in protein delivery applications. The swelling properties, Tg, degradation rate and mechanical properties are among other things that will easily be altered with the choice of functional groups or backbone polymer.</p>

The interactions between polymers and components of biological systems are an important area of interest within the fields of tissue engineering, polymer chemistry, medicine and biomaterials. In order to create such a biomimetic material, it must show the inherent ability to reproduce or elicit a biological function. How do we design synthetic materials in order to direct their interactions with biological systems? This thesis contributes to this research with aspects of how polymers interact with biological materials with the help of ionic interactions. Polyesters, biodegradable or not, may after a hydrolytic cleavage interact ionically with protonated amines by the liberated carboxylate functions. Amines are found in proteins and this fact will help us to anchor proteins to polyester surfaces. Another type of interaction is to culture cells in polymeric materials, i.e. scaffolds. We have been working on compliant substrates, knitted structures, to allow cell culture in three dimensions. A problem that arises here is how to get a high cell seeding efficiency? By working on the interactions between polymers, proteins and finally cells, it is possible to create a polarized protein membrane that allows for very efficient cell seeding, and subsequent three dimensional cell cultures. Finally a synthetic route to taylor interaction was developed. Here a group of polymers known as ionomers were synthesized. In our case ionic end groups have been placed onto biodegradable polycarbonates, we have created amphiphilic telechelic ionomers. Functionalization, anionic or cationic, changes the properties of the material in many ways due to aggregation and surface enrichment of ionic groups. It is possible to add functional groups for a variety of different interactions, for example introducing ionic groups that interact and bind to the complementary charge of proteins or on the other hand one can chose groups to prevent protein interactions, like the phosphorylcholine zwitterionomers. Such interactions can be utilized to modulate the release of proteins from these materials when used in protein delivery applications. The swelling properties, Tg, degradation rate and mechanical properties are among other things that will easily be altered with the choice of functional groups or backbone polymer.

<p>This report describes an annual line detection algorithm for the WoodEye quality control system. The goal with the algorithm is to find the positions of annual lines on the four surfaces of a board. The purpose is to use this result to find the inner annual ring structure of the board. The work was done using image processing techniques to analyze images collected with WoodEye. The report gives the reader an insight in the requirements of quality control systems in the woodworking industry and the benefits of automated quality control versus manual inspection. The appearance and formation of annual lines are explained on a detailed level to provide insight on how the problem should be approached. A comparison between annual rings and fingerprints are made to see if ideas from this area of pattern recognition can be adapted to annual line detection. This comparison together with a study of existing methods led to the implementation of a fingerprint enhancement method. This method became a central part of the annual line detection algorithm. The annual line detection algorithm consists of two main steps; enhancing the edges of the annual rings, and tracking along the edges to form lines. Different solutions for components of the algorithm were tested to compare performance. The final algorithm was tested with different input images to find if the annual line detection algorithm works best with images from a grayscale or an RGB camera.</p>

This report describes an annual line detection algorithm for the WoodEye quality control system. The goal with the algorithm is to find the positions of annual lines on the four surfaces of a board. The purpose is to use this result to find the inner annual ring structure of the board. The work was done using image processing techniques to analyze images collected with WoodEye. The report gives the reader an insight in the requirements of quality control systems in the woodworking industry and the benefits of automated quality control versus manual inspection. The appearance and formation of annual lines are explained on a detailed level to provide insight on how the problem should be approached. A comparison between annual rings and fingerprints are made to see if ideas from this area of pattern recognition can be adapted to annual line detection. This comparison together with a study of existing methods led to the implementation of a fingerprint enhancement method. This method became a central part of the annual line detection algorithm. The annual line detection algorithm consists of two main steps; enhancing the edges of the annual rings, and tracking along the edges to form lines. Different solutions for components of the algorithm were tested to compare performance. The final algorithm was tested with different input images to find if the annual line detection algorithm works best with images from a grayscale or an RGB camera.