Energy is an important input for various activities that provide impetus to economic, human and social development of any country. Among all the energy carriers, electricity is the most important and sought after energy carrier for its quality, versatility and ability to perform various technology driven end-use activities. Therefore access to electricity is considered as the single most important indicator determining the energy poverty levels prevailing in a country. Demand for electricity has increased significantly, especially in the developing countries, in recent years due to growth in population and intensification of economic activities. Therefore, providing quality and reliable electricity supply at low-cost has become one of the most pressing challenges facing the developing world. Although sufficient efforts have gone into addressing this issue, little progress has been made in finding a satisfactory solution in alleviating this problem. Currently, electricity supply is mostly dependent on centralized large-scale power generation. These centralized systems are strongly supply focused, fossil-fuel intensive, capital intensive, and rely on large-distance transmission and distribution systems. This results in electricity cost becoming unaffordable to the majority poor which comprises more than 70% of the total population in developing countries like India and the benefits of quality energy remaining with the rich, giving rise to inequitable distribution of energy. Continuous exploitation of fossil fuels has also contributed to local and global pollution. Therefore it is necessary to explore alternate means of providing energy access such that the energy carriers are clean, easy to use, environmentally benign and affordable to the majority of the rural poor. India is at a critical juncture of passing through the path of development. India is also in a unique position that its vast majority of rural population is energy poor which is disconnected from the electricity grid. In this context, the proposed research is an attempt towards developing a greater understanding on the issue of rural energy access and providing a possible solution for addressing this gap. This has been proposed to be achieved by adopting a decentralized energy planning approach and distributed energy systems mostly based on renewable energy sources. This is expected to reduce dependence on imported energy, promote self-reliance, provide economically viable energy services for rural applications and be environmentally safe. The focus is limited to biomass energy route which has many advantages; it is a geographically equitably distributed resource, geographical advantage of having potential to setup energy systems at any location where vegetation is present and not seasonal like other renewable energy technologies. A mathematical model-based approach is developed to assess the feasibility of such a proposal. Models are developed for performing biomass resource assessment, estimating end-use-wise hourly demand for electricity, performing capacity and location planning and assessing economic feasibility. This methodological framework was validated through a case study developed for the district of Tumkur in the state of Karnataka (a state in southern region of India). The literature survey was conducted exhaustively covering the whole span of supplyside and demand-side management of electricity systems, and grid-connected and stand-alone power generation systems, their technical, economic and environmental feasibilities. Literature pertinent to GIS applications in biomass assessment, facility location planning and scheduling models were also reviewed to discern how optimal capacity, location and economic dispatch strategy was formulated. Through the literature survey it was understood that there were very few attempts to integrate both demand-side management and supply-side management aspects in the rural energy context. GIS based mathematical models were sparsely used in rural energy planning and decision making. The current research is an attempt to bridge these gaps. The focus in this study is on effectively utilizing the locally available biomass resource. Assessment of Biomass Potential for Power Generation As a first step, the supply option was studied at village level by overlaying LULC (land use land cover) and village boundary GIS maps of Tumkur district. The result was fortified by the NDVI results from remote sensing images of land use pattern in Tumkur district. A detailed village-level assessment of wasteland potential was made for the entire district. The result showed which shows that in Tumkur district, roughly 17.3% of total geographical land was under exploitable wasteland. Using secondary data and literature, biomass potential indices were prepared for different wasteland types to determine the total biomass potential for power generation. The results based on the GIS data the assessment shows that Tumkur has roughly 17.3% of exploitable wasteland. A complete village-level annual power generation potential was assessed considering both energy plantations from wasteland, existing degraded forests and crop residues. Assessment of end-use-wise hourly Demand for Electricity at Village Level Household survey was conducted for 170 sample households randomly chosen from 15 villages, again randomly selected to represent different socio-economic categories. Using statistical tools like k-means clustering, one-way ANOVA and Tukey’s HSD test, first the households were classified into three economic categories to study the distribution of the households in each sample village. Later based on the number of households of each type in a village, the villages were further classified into five groups based on their socio-economic status. This was done to select the right representative per-household power demand for a village of any particular socioeconomic category. The representative per household power demand in each economic category along with secondary data helped in deriving the electricity daily load profiles for all the villages. Representative demand profiles were generated for different seasons across different sectors namely domestic, agriculture and industry sectors at the end-use level comprising of activities like home lighting, appliances, irrigation pump sets operation and small industry operations. Mathematical Modeling for Optimal Siting of Biomass Energy Systems Since the power has to be generated through biomass route, biomass may have to be transported over a large geographical area which requires efficient design of logistic systems. Apart from that, a major component of cost of biomass power is the cost of transportation of biomass from source to the power plant. Therefore it is important to determine the optimal siting of biomass energy systems to minimize the cost of transportation. Since these optimal locations are based on minimizing Euclidian distance, installing the power generation systems at these locations would also minimize total cost of local transmission and distribution. In order to locate the biomass energy system, K-medoid clustering algorithm was used to determine the optimal number of clusters of villages to minimize the Euclidean distance between the medoid of the cluster and the villages within the cluster, and minimize the total installed capacity to meet the cluster demand. The clustering algorithm was modified in such a way that the total capital cost of the power generation system installation was minimized. Since the total project cost not only depended on capital cost alone, but also on biomass transportation and power transmission costs, these costs were also included in the analysis. It was proposed to locate the energy systems at the medoids of the clusters. Optimal Capacity Planning Installing biomass power systems requires large investments. It is therefore necessary to reduce the peak demand to bring down the installed capacity required. This was achieved by developing heuristics to arrive at an optimal scheduling scheme of the end-use activities that would minimize the peak demand. The heuristics procedure was demonstrated on five representative villages, each from different economic category. The optimal demand profile was used as input in HOMER micro-energy system simulation software to perform a techno-economic analysis. The simulation facilitated a thorough economic feasibility study of the system. This included a complete analysis of the cash inflows and outflows, capital cost of the system, operation and maintenance cost, cost of fuel and estimation of total GHG emissions. There are many limitations in planning at village-scale. The results indicated that capacity planning done at the village level was prone to over-estimation of installed capacity of the system increasing the investment requirement, under utilization of the capacity and suffered from supply scarcity of biomass. This emphasized the need for looking at a bigger conglomerate of villages in other words cluster of villages. In the next step, the optimal capacity planning was performed for one of the clusters formed using the K-medoid clustering algorithm with the power generation system located at the medoid. For demonstrating the practical feasibility of extending the methodology to cluster level, a cluster with maximum number of villages was chosen from the optimal cluster set in the k-medoid algorithm output. The planning was conducted according to the socioconomic category of the villages in the cluster. Economic implications of Stand-alone (SA) vs Grid-connected (GC) Mode of Operation Other important question that was answered in this analysis was a comparison of GC systems with SA systems. Since extension of grid to a village that is not electrified involved drawing high voltage transmission lines from the nearest grid point, installation of distribution transformers and low transmission lines within the village for distribution. Since these involve high costs it was necessary to study whether or not it is feasible to extend the grid or install a stand-alone system. This question was answered by the breakeven distance for which grid extension becomes more economical than a SA system. For each village breakeven distance varied with the total installed capacity and the operational costs. This helped to compare the GC systems vis-à-vis SA systems from the point of view of economic feasibility. Summary It is necessary that planning and strategies be rational and reasonable for effectively assuaging the rural electrification imbroglio. The current study has highlighted the importance of integrating both demand-side-management and supply-sidemanagement of energy systems in the context of planning for power generation and distribution in rural areas. The key findings in the current study are: • The study showed the feasibility of biomass power systems in meeting the rural electricity needs. • Biomass assessment results showed that, if the power demand could be brought down by replacing the existing appliances with efficient ones (ex. compact fluorescent lamps and improved irrigation pump set valves), Tumkur district has enough biomass potential to meet both the current as well as increased future demands for electricity. • The optimal number of clusters minimizing total capital cost of biomass energy systems, transportation cost of biomass and distribution cost of power, was 96 for Tumkur district. For Kunigal block, the optimal number of clusters was 37 and 32 for supply and demand scenarios 1(BAU -Business As Usual) and 2 (with 10% increase in cropland and 20% increase in demand). • The optimal capacity planning emphasized the importance of clustering of villages for minimizing the total installed capacity. The result also showed that the breakeven distance was the determining factor about the choice of GC vs SA systems. The main contributions of this thesis are: i. Hourly demand pattern was studied to estimate the aggregate demand for electricity at village level for different sectors across various seasons. ii. Village-wise biomass resources potential for power generation was assessed iii. Optimal locations for siting biomass energy systems were identified using k-medoid clustering algorithm iv. An optimal scheduling of end-use activities was planned using heuristics method to minimize the installed capacity v. Optimal location, scheduling plan of end-use activities and optimal capacity were determined for individual villages as well as village clusters vi. The economic implications of grid extension vis-à-vis stand-alone mode of operation of the installed biomass energy systems were studied The generalized, multipronged approach presented in this thesis to effectively integrate both demand-side management and supply-side management in rural energy planning can be implemented for any rural region irrespective of the location. The results emphasized that for efficient demand-side and supply-side management, it is important to plan for clusters of villages than at the individual village level. The results reported in this thesis will help the policy and strategy makers, and governments to achieve rural electrification to a satisfactory extent to ensure continuous, uninterrupted and reliable power supply by determining the clustering strategy, optimal cluster size, optimal scale and siting of decentralized biomass power generation systems.

Global increase in energy consumption and global warming require more energy production but less CO2emission. Increase in efficiency of energy production is an effective way for this purpose. This can be reached by increasing boiler temperature and pressure in a biomass power plant. By increasing material temperature 50°C, the efficiency in biomass power plants can be increased significantly and the CO2emission can be greatly reduced. However, the materials used for future biomass power plants with higher temperature require improved properties. Austenitic stainless steels are used in most biomass power plants. In austenitic stainless steels a phenomenon called dynamic strain aging (DSA), can occur in the operating temperature range for biomass power plants. DSA is an effect of interaction between moving dislocations and solute atoms and occurs during deformation at certain temperatures. An investigation of DSA influences on ductility in austenitic stainless steels and nickel base alloys have been done. Tensile tests at room temperature up to 700°C and scanning electron microscope investigations have been used. Tensile tests revealed that ductility increases with increased temperature for some materials when for others the ductility decreases. This is, probably due to formation of twins. Increased stacking fault energy (SFE) gives increased amount of twins and high nickel content gives a higher SFE. Deformation mechanisms observed in the microstructure are glide bands (or deformations band), twins, dislocation cells and shear bands. Damage due to DSA can probably be related to intersection between glide bands or twins, see figure 6 a). Broken particles and voids are damage mechanisms observed in the microstructure.

Made available in DSpace on 2016-12-12T20:12:31Z (GMT). No. of bitstreams: 1 PGEF14MA022.pdf: 1372832 bytes, checksum: e86c5ecf29b815ad49c48af209703b36 (MD5) Previous issue date: 2014-07-30 / This work was conducted in the state of Santa Catarina, the main object of study the production chain of compressed residual biomass. The study aimed to evaluate many aspects that influence the production chain in order to give visibility to this segment in the state. The study aimed to characterize segments of the production chain and analyze their level of structure, determine the potential for residual forest biomass and agricultural in Santa Catarina and determine the physical and energetic properties of the most abundant residues available in the state. The methodology was based on questionnaires to representatives of the segments involved in the compressed sector. To quantify the waste industry data surveys were conducted. To review the physical and energy waste were determined the following properties: moisture content, basic density, higher calorific power, ash, volatile and fixed carbon content. It could be observed that the emergence of this supply chain is in the state recently, still being unstructured and with little interaction between and within segments. The raw material used for producing compressed is coming from sawmills mostly, providing shavings of Pinus spp. with moisture content between 8 10%. In relation to the potential of forest and agricultural residues, the state is 16 17 considered a major producer. The west region, north region and the mountains region of Santa Catarina, are the regions that produced the most residues in 2012; and therefore hold great potential for energy generation through biomass waste. The residues produced in larger quantities were derived from corn, forestry, rice and soybeans. Of these, from the forest sector showed the best values for use in energy generation. Among agricultural residues, corn on the cob was the best, obtaining results similar to forestry residues / Este trabalho foi realizado no estado de Santa Catarina, tendo como principal objeto de estudo a cadeia produtiva de compactados de biomassa residual. O trabalho buscou avaliar vários aspectos que influenciam a cadeia produtiva, de forma a dar visibilidade a este segmento no estado. O estudo teve como objetivos caracterizar os segmentos da cadeia produtiva e analisar o seu nível de estruturação; determinar o potencial de biomassa residual florestal e agrícola em Santa Catarina; e determinar as propriedades físicas e energéticas dos resíduos mais abundantes disponíveis no estado. A metodologia utilizada foi a aplicação de questionários aos representantes dos segmentos envolvidos no setor de compactados. Para a quantificação dos resíduos foram realizados levantamentos de dados setoriais. Para a avaliação física e energética dos resíduos foram determinadas as seguintes propriedades: teor de umidade, massa específica básica, poder calorífico superior, teor de cinzas, teor de voláteis e teor de carbono fixo. Como resultados mais relevantes, ficou evidente que a cadeia produtiva de compactados tem sua formação recente no estado, sendo ainda desestruturada e com pouca interação entre e dentro dos segmentos. A matéria-prima utilizada pelos produtores de compactados é oriunda de serrarias em sua 12 13 maioria, que fornecem maravalha de Pinus spp. com teor de umidade entre 8 10%. Em relação ao potencial de resíduos florestais e agrícolas, o estado é considerado um grande produtor. As mesorregiões oeste catarinense, norte catarinense e serrana, são as que mais produziram resíduos em 2012; e por esse motivo detêm grande potencial para a geração de energia através da biomassa residual. Os resíduos produzidos em maior quantidade foram os provenientes da cultura do milho, silvicultura, cultura do arroz e cultura da soja. Destes, os provenientes do setor florestal apresentaram os valores mais adequados para o uso na geração de energia. Dentre os resíduos agrícolas, o sabugo de milho foi o melhor, obtendo resultados similares aos resíduos de madeira

Power generation from biomass based renewable energy technologies is a promising option in retrofitting our dependence in conventional power generation processes. The development of any society is not possible without sustainable energy and access to energy creates that environment that allows the world to thrive. Electricity access especially in developing regions of the world is of particular interest. This work provides results on electricity efficiency, the economic feasibility and environmental impact of biomass based power technologies in small scale setting using Aspen Plus software. The power generation processes analysed on standalone basis include - micro gas turbine, gas turbine, steam turbine, Stirling engine and internal combustion engine. Some of the processes are optimized in the design to suit the specific climate and available wood waste stream in Nigeria is considered in this work. Simulation results indicate that gas engines power technologies gave a better electric performance of more than 30% with its integration with biomass gasification technology in production of fuel gas. The stirling engine power technology shows a good prospect despite its yet to be commercial status. The modification of the engine (removal regenerator) gives a better electric efficiency. Also result shows that internal combustion engine process emits more of nitric oxides compared to other technologies which create doubts over its environmental compatibility. Economic studies show that for small scale power generation, internal combustion engines and stirling engines are economic feasible. Also, steam turbine and gas turbine illustrate why they are mostly applied in medium/large scale biomass power generation specially recommended to regions where more biomass resource are produced. The micro gas turbine power technology can also be applied in small scale despite its high total investment capital. Furthermore, the study shows that about from 1.8 million tonnes per year of saw dust (wood waste) produced from lumber industries in Nigeria, about 1.3 TWh of electricity can be generated from 1000 MW power plant. Power generation via the utilization of biomass prove to be a possible path to Nigeria’s economic, social and environmental sustainability but the extent to which this can achieved is strongly dependent institutional framework, investment, incentives and information policies. / Program: Masterutbildning i energi- och materialåtervinning

The Sustainable Development Goal n°7 is calling for a prompt response to guarantee affordable and clean energy for all. While the electrification rate is rapidly increasing around the world, much work still remains to achieve electricity access in remote areas or Non-Interconnected Zones, such as the numerous small islands that compose Indonesia. This thesis work sought to understand which standalone microgrid design would represent the most sustainable solution for a rural electrification challenge, where the final scope is to provide 24 h/d stable and reliable electricity connection to the local communities of Sulawesi, Indonesia. To achieve such a result, two diametrically opposed microgrid layouts are outlined in terms of renewables share: a Business As-Usual Scenario, in which the microgrid is powered by a standard diesel set, and an integrated renewable-based scenario, in which the microgrid envisions the implementation of biopower, PV system and Li-ion batteries as a storage option. A thorough comparison on a series of Key Parameter Indicators (KPIs), such as Carbon Footprint, Levelized Cost Of Electricity and job creation, led to the identification of the renewable-based scenario as the most sustainable option. This system layout resulted in a biomass powered electricity production covering 80% of the total electricity demand, with the remaining 20% supplied by solar power and storage means and a LCOE of 0.18 USD/kWh. At the price of a higher upfront cost than the one of BAU case, the renewable-based alternative entitles a higher profitability when compared to the business-asusual one, together with reduced carbon dioxide emissions and a higher number of jobs directly created. / Hållbarhetsmål nr 7 kräver ett snabbt svar för att garantera överkomlig och ren energi för alla. Medan elektrifieringsgraden snabbt ökar runt om i världen, återstår mycket arbete för att nå elåtkomst i avlägsna områden eller icke-sammankopplade zoner, såsom de många små öarna som utgör Indonesien. Detta avhandlingsarbete försökte förstå vilken fristående mikronätdesign som skulle representera den mest hållbara lösningen för en elektrifieringsutmaning på landsbygden, där det slutliga utrymmet är att tillhandahålla 24 timmars stabil och pålitlig elanslutning till lokalsamhället Sulawesi, Indonesien. För att uppnå ett sådant resultat beskrivs två diametralt motsatta mikronätlayouter när det gäller andelen förnybara energikällor: ett Business As-Usual-scenario, där mikronätet drivs av en standarddiesel och ett integrerat förnyelsebaserat scenario, där microgrid ser implementeringen av biokraft, solcellssystem och litiumjonbatterier som ett lagringsalternativ. En noggrann jämförelse av en serie nyckelparametrar (KPI), såsom koldioxidavtryck, nivåiserad elkostnad och skapande av jobb, ledde till att det förnyelsebaserade scenariot identifierades som det mest hållbara alternativet. Systemlayouten resulterade i en biomassadriven elproduktion som täckte 80% av det totala elbehovet, med de återstående 20%som levereras av solenergi och lagringsmedel och en LCOE på 0,18 USD / kWh. Till priset av en högre kostnad i förskott än i BAU-fallet ger det förnyelsebaserade alternativet högre lönsamhet jämfört med det som vanligt, tillsammans med minskade koldioxidutsläpp och ett högre antal direkt skapade jobb.