This thesis concisely describes essential type of modulation technique for transmission of binary signal. In introductory part there are summarized advantages and disadvantages for each described modulation technique. There are described proceeding of modulation and demodulation too. Next part is specialized mainly to determination of incorrect receiving probability. For each modulation technique are calculated theoretical values of bit error rate and compiled graph. In practical part there are described possibilities of Matlab platform for measurement of bit error rate. In implement Simulink there is built model of communication channel with additional AWGN channel. Graphs are constructed from simulation data by the help of model’s control script. On selected modulation technique are inspected various elements which are reacted with graph. In finale part there are compared theoretical and measured values and summarized analysis.

The current focus on the Internet of Things (IoT) has led to the emergence of many network scenarios with unlimited use cases, including smart homes, smart cities, smart agriculture, and more. Unmanned aerial vehicles (UAVs), also known as drones, have become increasingly popular due to their versatility and ability to collect and transmit data through various sensors and cameras. With real-time data transmission, autonomy, and cost-effectiveness, UAVs have become valuable tools for different applications, including disaster management, agriculture monitoring, and remote area control. Low-power wide-area network (LPWAN) technology plays a crucial role in enabling IoT, and LoRaWAN is one of the specific LPWAN communication technologies that can provide low power consumption and coverage over a wide range. During a catastrophe, wireless communication is critical for analyzing damaged regions, coordinating rescue and relief team actions, saving lives, and reducing economic losses. UAVs can partially replace damaged or overloaded wireless networks as an alternative wireless network provider. This thesis aimed to simulate a LoRa network and investigate the relationship between the UAV coverage radius and elevation angle, as well as the effect of multipath distortion and signal attenuation on UAV and user distance. By calculating signal-to-noise ratio (SNR) and bit error rate (BER) for LoRa in a line-of-sight (LoS) and non-line-of-sight (NLoS) environment, we provided a comprehensive analysis of LoRaWAN performance in real-life environments for long distances. The results indicate that LoRaWAN communication is reliable in various environments, making it a promising technology for emergency and medical communications. / Det nuvarande fokuset på Internet of Things (IoT) har lett till uppkomsten av många nätverksscenarier med obegränsade användningsfall, inklusive smarta hem, smarta städer, smart jordbruk och mer. Obemannade flygfarkoster (UAV), även kända som drönare, har blivit allt populärare på grund av deras mångsidighet och förmåga att samla in och överföra data genom olika sensorer och kameror. Med realtidsdataöverföring, autonomi och kostnadseffektivitet har UAVs blivit värdefulla verktyg för olika applikationer, inklusive katastrofhantering, jordbruksövervakning och fjärrkontroll av områden. Low-power wide-area network (LPWAN)-teknik spelar en avgörande roll för att möjliggöra IoT, och LoRaWAN är en av de specifika LPWAN-kommunikationsteknikerna som kan ge låg strömförbrukning och täckning över ett brett spektrum. Under en katastrof är trådlös kommunikation avgörande för att analysera skadade regioner, koordinera räddnings- och hjälpteams åtgärder, rädda liv och minska ekonomiska förluster. UAV:er kan delvis ersätta skadade eller överbelastade trådlösa nätverk som en alternativ leverantör av trådlöst nätverk. Detta examensarbete syftade till att simulera ett LoRa-nätverk och undersöka sambandet mellan UAV-täckningsradien och höjdvinkeln, såväl som effekten av flervägsdistorsion och signaldämpning på UAV och användaravstånd. Genom att beräkna signal-brusförhållande (SNR) och bitfelsfrekvens (BER) för LoRa i en siktlinje (LoS) och icke-siktlinje (NLoS) miljö, gav vi en omfattande analys av LoRaWAN prestanda i verkliga miljöer för långa avstånd. Resultaten indikerar att LoRaWAN-kommunikation är tillförlitlig i olika miljöer, vilket gör den till en lovande teknik för akut- och medicinsk kommunikation.

No / A proposed method for cancelling or reducing the effect of the transmitted power within the transceiver MIMO unit is investigated and discussed using a feedback signal process between the elements. Several parameters including the level of feedback power mismatch, the transmitted power and the received power are considered in this work to test the performance of the system in term of the bit error rate (BER) versus signal to noise ratio (SNR). A new software programme using MATLAB is implemented to evaluate the proposed method. The results showed that the performances of the system are heavily dependent on the amount of the transmitted power, the received power, and the mismatch in the feedback component.

No description available.

<p>In this thesis, we consider a coherent MIMO system, emphasizing on the simplicity of implementation at both the code generator and the receiver. Specifically, we consider the transmission of a space-time block code (STBC) that is a linear combination of coding matrices weighted by the information symbols through a receiver-correlated flat-fading channel and received by a linear ZF detector. Our target is the design of a code which, while maintaining full data-transmission rate, minimizes the asymptotic average (over all the random channel coefficients) bit error probability of an ZF detector. To this end, we first ensure that the full data rate of symbols is maintained, and then, based on the BER for 4-QAM signals, we derive the conditions for optimal codes and establish a code structure that minimizes the asymptotic average bit error probability. We also prove that the diversity gain of our M × N MIMO system is N − M + 1. The resulting optimum code structure requires the individual coding matrices to be mutually orthogonal when vectorized and is related to covariance matrix of correlated channel. The first optimum structural characteristics of the coding matrices is described as trace-orthogonal. A new approach to express expected value of random correlated channel has been proposed as well. From simulation results we can see that advantage of optimum code over uncoded system is more apparent as channel correlation is higher.</p> / Master of Applied Science (MASc)

No / Multi-antenna(MIMO) techniques are reported to improve the performance of radio communication systems in terms of their capacity and spectral efficiency. In combination with appropriate receiver technologies they can also provide savings in the required transmit power with respect to target bit error rate. Long Term Evolution(LTE), one of the candidates for fourth generation(4G) mobile communication systems has MIMO as one of its underlying technologies and ITU defined channel models for its propagating environment. This paper undertakes a comprehensive verification of the performance of transmit diversity MIMO in the downlink sector of LTE. It uses models built using MATLAB to carry out simulations. It is deduced that generally increasing transmit diversity configuration from 2x2 to 4x4 offers SNR savings in flat fading channels though with a user equipment moving at 30km/hr, deploying 2x2 offers higher SNR saving below 7dB. Furthermore bandwidth variation has minimal effect on the BER performance of transmit MIMO except at SNR values above 9dB while the gains of higher modulation schemes come with a transmit power penalty.

The DIRECT (DIviding RECTangles) algorithm JONESJOTi, a variant of Lipschitzian methods for bound constrained global optimization, has been applied to the optimal transmitter placement for indoor wireless systems. Power coverage and BER (bit error rate) are considered as two criteria for optimizing locations of a specified number of transmitters across the feasible region of the design space. The performance of a DIRECT implementation in such applications depends on the characteristics of the objective function, the problem dimension, and the desired solution accuracy. Implementations with static data structures often fail in practice because of unpredictable memory requirements. This is especially critical in S⁴W (Site-Specific System Simulator for Wireless communication systems), where the DIRECT optimization is just one small component connected to a parallel 3D propagation ray tracing modeler running on a 200-node Beowulf cluster of Linux workstations, and surrogate functions for a WCDMA (wideband code division multiple access) simulator are also used to estimate the channel performance. Any component failure of this large computation would abort the entire design process. To make the DIRECT global optimization algorithm efficient and robust, a set of dynamic data structures is proposed here to balance the memory requirements with execution time, while simultaneously adapting to arbitrary problem size. The focus is on design issues of the dynamic data structures, related memory management strategies, and application issues of the DIRECT algorithm to the transmitter placement optimization for wireless communication systems. Results for two indoor systems are presented to demonstrate the effectiveness of the present work. / Master of Science

The Motorola Inc. paging protocol FLEX is discussed. The design and construction of a FLEX paging protocol decoder is discussed in detail. It proposes a decoding solution that includes a radio frequency (RF) receiver and a decoder board. The RF receiver will be briefly discussed. The decoder design is the main focus of this thesis as it transforms the RF frequency modulated (FM) data from the receiver and converts it to FLEX data words. The decoder is designed to handle bit sampling, bit clock synchronization, FLEX packet detection, and FLEX data word collection. The FLEX data words are then sent by the decoder to an external computer through a serial link for bit processing and storage. A FLEX transmitter will send randomly generated data so that a bit error rate (BER) calculation can be made at a PC. Each receiver'9s noise power and noise bandwidth will be measured so that noise spectral density may be calculated. A complete measurement set-up will be shown on how these noise measurements are made. The BER at a known power level is recorded. This enables Eb/No curves to be generated so that results of the decoding algorithm may be compared. This is performed on two different receivers. / Master of Science

Modern devices provide a multitude of services that use radio frequencies in continual smaller packages. This size leads to an antenna used to transmit and receive information being usually very inefficient and a lot of power is wasted just to be able to transmit a signal. To mitigate this problem a new antenna was introduced by Dr. Manteghi that is capable of working efficiently across a large band. The antenna achieves this large band by doing quick frequency hopping across multiple channels. In order to test the performance of this antenna against more common antennas, a software radio was needed, such that tested antennas can be analyzed using multiple modulations. This paper presents a software defined radio system that was designed for the purpose of testing the bit-error rate of digital modulations schemes using described and other antennas. The designed system consists of a DSP, an FPGA, and commercially available modules. The combination allows the system to be flexible with high performance, while being affordable. Commercial modules are available for multiple frequency bands and capable of fast frequency switching required to test the antenna. The DSP board contains additional peripherals that allows for more complex projects in the future. The block structure of the system is also very educational as each stage of transmission and reception can be tested and observed. The full system has been constructed and tested using simulated and real signals. A code was developed for communication between commercial modules and the DSP, bit error rate testing, data transmission, signal generation, and signal reception. A graphical user interface (GUI) was developed to help user with information display and system control. This thesis describes the software-defined-radio design in detail and shows test results at the end. / Master of Science

Virginia Tech researchers have developed a broadband channel sounder that can measure channel quality while a wireless network is in operation. Channel measurements from the broadband sounder hold the promise of improving TCP/IP performance by trigging configuration changes in an adaptive data link layer protocol. We present an adaptive data link layer protocol that can use different levels of forward error correction (FEC) codes and link layer automatic retransmission request (ARQ) to improve network and transport layer performance. Using a simulation model developed in OPNET, we determine the effects of different data link layer protocol configurations on TCP/IP throughput and end-to-end delay using a Rayleigh fading channel model. Switching to higher levels of FEC encoding improves TCP/IP throughput for high bit error rates, but increases end-to-end delay of TCP/IP segments. Overall TCP/IP connections with link layer ARQ showed approximately 150 Kbps greater throughput than without ARQ, but lead to the highest end-to-end delay for high bit error rate channels. Based on the simulation results, we propose algorithms to maximize TCP/IP throughput and minimize end-to-end delay using the current bit error rate of the channel. We propose a metric, carrier-to-interference ratio (CIR) that is calculated from data retrieved from the broadband channel sounder. We propose algorithms using the carrier-to-interference ratio to control TCP/IP throughput and end-to-end delay. The thesis also describes a monitor program to use in the broadband wireless system. The monitor program displays data collected from the broadband sounder and controls the settings for the data link layer protocol and broadband sounder while the network is in operation. / Master of Science