Made available in DSpace on 2016-04-18T21:39:47Z (GMT). No. of bitstreams: 4 Erik Aceiro Antonio1.pdf: 1548083 bytes, checksum: 089690da04ba664ec23f802cb3975826 (MD5) Erik Aceiro Antonio2.pdf: 1618157 bytes, checksum: efefcd4d6d658d457615e8757d4175d8 (MD5) Erik Aceiro Antonio3.pdf: 2722615 bytes, checksum: a3f70f5fd3c8b07408a62f1d5a6cfbc2 (MD5) Erik Aceiro Antonio4.pdf: 1214557 bytes, checksum: 8bf6858d70baeb72941ce7c5cc104437 (MD5) Previous issue date: 2008-06-30 / The advent of the Internet and the development of Information and Communication Technologies (ICT s)generated new spaces for communication and collaboration between groups of people in geographically distinct regions. The association of Web technology with instrument automation and control by computer has made possible the development of the so called Remote Laboratories or WebLabs - distributed environments that allow to access and control experiments remotely through a network or the Internet in real time and with the sensation of presence. In this work, a WebLab was developed for the study and caracterization of a WDM (Wave Division Multiplexing) system, aiming to support and complement activities in faceto-face and distance courses on Optical Communications. Drivers and graphic user interfaces (GUI s) were developed with the software LabVIEW for control and data acquisition of instruments used in a remote experiment to measure the basic features of a WDM system. An application was also developed with the software VPI for the numerical simulation of Bit Error Rate (BER) measurements. This work is part of the activities related to the participation of the Mackenzie Photonics Laboratory in the KyaTera Project of FAPESP s TIDIA Program. / O advento da Internet e o desenvolvimento das Tecnologias da Informação e Comunicação (TIC s) geraram novos espaços para a comunicação e colaboração entre grupos de pessoas localizadas em regiões geograficamente distintas. A associação da tecnologiaWeb com a automação e controle de instrumentos por computador tornou possível o desenvolvimento dos chamados Laboratórios Remotos ou WebLabs - ambientes distribuídos que permitem o acesso e controle remoto de experimentos através de uma rede de comunicação ou da Internet em tempo real e com sensação de presença. Neste trabalho, foi desenvolvido um WebLab para estudo e caracterização de um sistema WDM (Wave Division Multiplexing), destinado a apoiar e complementar atividades em cursos de Comunicações Ópticas presenciais e a distância. Foram desenvolvidos drivers e interfaces gráficas de usuário (GUI s) com o software LabVIEW para o controle e aquisição de dados dos instrumentos utilizados em um experimento remoto de medida das características básicas de um sistema WDM. Também foi desenvolvido um aplicativo com o software VPI que permite simular a medida da Taxa de Erro de Bit (BER) do sistema. Este trabalho é parte das atividades relacionadas à participação do Laboratório de Fotônica Mackenzie no Projeto KyaTera do Programa TIDIA da FAPESP.

This dissertation thesis deals with new progressive channel coding methods for data transmission using satellite transponder. The design of the system for SMS transmission, in which novel turbo coding methods are applied, is discussed too. An achievement of the lowest output power and the smallest user aperture is the principal aim of the new method applications. Design of system that would be able to the error free SMS transmission by very low signal to noise ratio is analyzed in this dissertation thesis. The work is focused on energy budget, modification and implementation of new turbo code types and using unique properties, development of new bit error rate estimation methods and methods for determination of final SMS form. The main contribution is the new type of turbo code development that have optimal properties for this usage, development of new bit error rate estimation method and development of method that is able to determine final form of SMS on the basis SMS frame structure and turbo decoding theory when the bit error rate is not zero.

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Hardware implementing forward error correction (FEC) is currently available for utilization by the airborne telemetry system designer. This paper will discuss the potential benefits along with drawbacks when using this technology. Laboratory testing is supplemented with real-world flight testing. Performance results comparing FEC and non-FEC systems are presented for both IRIG-106 Pulse Code Modulation/Frequency Modulation, PCM/FM, (or Continuous Phase Frequency Shift Keying, CPFSK, with filtering, or ARTM Tier 0) and Shaped Offset Quadrature Phase Shift Keying, Telemetry Group version (SOQPSK-TG or ARTM Tier I) waveforms.

International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California / There are well-known advantages in using pseudo-random sequences for testing of data communication links. The sequences, also called pseudo-noise (PN) sequences, approximate random data very well, especially for sequences thousands of bits long. They are easy to generate and are widely used for bit error rate testing because it is easy to synchronize a slave pattern generator to a received PN stream for bit-by-bit comparison. There are other aspects of PN sequences, however, that are not as widely known or applied. This paper points out how some of the less familiar characteristics of PN sequences can be put to practical use in the design of a Digital Test Set and other specialbuilt test equipment used for checkout of the EOS AM-1 Space Data Receiver. The paper also shows how knowledge of these PN sequence characteristics can simplify troubleshooting the digital sections in the Space Data Receiver. Finally, the paper addresses the sufficiency of PN data testing in characterizing the performance of a receiver/data recovery system.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Bit error rate (BER) and bandwidth efficiency of several variations of enhanced Feher patented quadrature phase shift keying (FQPSK) [1] are described. An enhanced FQPSK increases the channel packing density of that of the IRIG 106-00 standardized FQPSK-B by approximately 50% in adjacent channel interference (ACI) environment. As the bandwidth efficiency of FQPSK-B DOUBLES (2×) that of pulse code modulation/Frequency modulation (PCM/FM) [5], the enhanced FQPSK, with a simpler transceiver than FQPSK-B, has a channel packing density of TRIPLE (3×) that of PCM/FM. One of the other enhanced FQPSK prototypes has an end to end system loss of only 0.4 dB at BER=1x10^(-3) and 0.5 dB at BER=1x10^(-4) from ideal linearly amplified QPSK theory. The enhanced FQPSK has a simple architecture, thus is inexpensive and has small size, for ultra high bit rate implementation. With low redundancy forward error correction (FEC) coding which expands the spectrum by approximately 10%, further improvement of about 3-4.5dB E N b o is attained with NLA FQPSK-B and enhanced FQPSK at BER=1x10^(-5) .

One would like to evaluate and compare complex digital communication systems based upon their overall bit error rate. Unfortunately, analytical expressions for bit error rate for even simple communication systems are notoriously difficult to evaluate accurately. Therefore, communication engineers often resort to simulation techniques to evaluate these error probabilities. In this thesis importance sampling techniques (variations of standard Monte Carlo methods) are studied in relation to both linear and non-linear detectors. Quick simulation, an importance sampling method based upon the asymptotics of the error estimator, is studied in detail. The simulated error probabilities are compared to values obtained by numerically inverting Laplace Transform expressions for these quantities.

For channel estimation without data-induced interference in data-dependent superimposed training (DDST) scheme, the data sequence is shifted by subtracting a data-dependent sequence before added to training sequence at transmitter. The distorted term causes the data identification problem (DIP) at the receiver. In this thesis, we propose two precoding schemes based on previous work. To maintain low peak-to-average power ratio (PAPR), the precoding matrix is restricted to a diagonal matrix. The first scheme is proposed to enlarge the minimum distance between the closest codewords, termed as efficient diagonal scheme. Conditions to make sure the precoding matrix is efficient for M-ary phase shift keying (MPSK) and M-ary quadrature amplitude modulation (MQAM) modulation are listed in this paper. The second scheme pursues a lowest complexity at receiver which means the amount of searching set is reduced. It is a trade-off between the better bit error rate (BER) performance and a lower complexity at receiver. The simulation results show that PAPR have been improved and the DIP is solved in both schemes.

ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA / In some flight test scenarios the telemetry link is noise limited at long slant ranges or during signal fade events caused by antenna pattern nulls. In these situations, a mitigation technique such as forward error correction (FEC) can add several decibels to the link margin. The particular FEC code discussed in this paper is a variant of a low-density parity check (LDPC) code and is coupled with SOQPSK modulation in the hardware tested. This paper will briefly cover lab testing of the flight-ready hardware then present flight test results comparing a baseline uncoded telemetry link with a LDPC-coded telemetry link. This is the first known test dedicated to this specific FEC code in a real-world test environment with flight profile tailored to assess the viability of an LDPC-coded telemetry link.

The main topic of this thesis is based on multiple-input multiple-output (MIMO) wireless communications, which is a novel technology that has attracted great interest in the last twenty years. Conventional MIMO systems using up to eight antennas play a vital role in the urban cellular network, where the deployment of multiple antennas have significantly enhanced the throughput without taking extra spectrum or power resources. The massive MIMO systems “scales” up the benefits that offered by the conventional MIMO systems. Using sixty four or more antennas at the BS not only improves the spectrum efficiency significantly, but also provides additional link robustness. It is considered as a key technology in the fifth generation of mobile communication technology standards network, and the design of new algorithms for these two systems is the basis of the research in this thesis. Firstly, at the receiver side of the conventional MIMO systems, a general framework of bit error rate (BER) approximation for the detection algorithms is proposed, which aims to support an adaptive modulation scheme. The main idea is to utilize a simplified BER approximation scheme, which is based on the union bound of the maximum-likelihood detector (MLD), whereby the bit error rate (BER) performance of the detector for the varying channel qualities can be efficiently predicted. The K-best detector is utilized in the thesis because its quasi- MLD performance and the parallel computational structure. The simulation results have clearly shown the adaptive K-best algorithm, by applying the simplified approximation method, has much reduced computational complexity while still maintaining a promising BER performance. Secondly, in terms of the uplink channel estimation for the massive MIMO systems with the time-division-duplex operation, the performance of the Grassmannian line packing (GLP) based uplink pilot codebook design is investigated. It aims to eliminate the pilot contamination effect in order to increase the downlink achievable rate. In the case of a limited channel coherence interval, the uplink codebook design can be treated as a line packing problem in a Grassmannian manifold. The closed-form analytical expressions of downlink achievable rate for both the single-cell and multi-cell systems are proposed, which are intended for performance analysis and optimization. The numerical results validate the proposed analytical expressions and the rate gains by using the GLP-based uplink codebook design. Finally, the study is extended to the energy efficiency (EE) of the massive MIMO system, as the reduction carbon emissions from the information and communication technology is a long-term target for the researchers. An effective framework of maximizing the EE for the massive MIMO systems is proposed in this thesis. The optimization starts from the maximization of the minimum user rate, which is aiming to increase the quality-of-service and provide a feasible constraint for the EE maximization problem. Secondly, the EE problem is a non-concave problem and can not be solved directly, so the combination of fractional programming and the successive concave approximation based algorithm are proposed to find a good suboptimal solution. It has been shown that the proposed optimization algorithm provides a significant EE improvement compared to a baseline case.

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2015. / Submitted by Albânia Cézar de Melo (albania@bce.unb.br) on 2016-02-16T14:01:50Z No. of bitstreams: 1 2015_RubenOrtegaBlanco.pdf: 78834010 bytes, checksum: 3420abfa3f7efe2d616b97f09d14ff70 (MD5) / Approved for entry into archive by Raquel Viana(raquelviana@bce.unb.br) on 2016-02-19T21:04:29Z (GMT) No. of bitstreams: 1 2015_RubenOrtegaBlanco.pdf: 78834010 bytes, checksum: 3420abfa3f7efe2d616b97f09d14ff70 (MD5) / Made available in DSpace on 2016-02-19T21:04:29Z (GMT). No. of bitstreams: 1 2015_RubenOrtegaBlanco.pdf: 78834010 bytes, checksum: 3420abfa3f7efe2d616b97f09d14ff70 (MD5) / O objetivo do seguinte trabalho é determinar um modelo matemático que permita-nos obter a Relação Sinal Ruído mais Interferência (SNIR do Inglês Signal-to-Noise plus Interference Ratio), a Taxa de Erro de Bits (BER do Inglês Bit Error Rate) de um salto e a Taxa de Erro de Bits fim-a-fim numa rede acústica submarina. Com esse propósito foi desenvolvido um modelo matemático que permite o cálculo destes parâmetros considerando a interferência para o protocolo de acesso ao meio (MAC do Inglês Medium Access Control) ALOHA puro. Também foi necessário desenvolver antes diferentes parâmetros da rede, tais como, distância média do salto, distância média até o nó central, distância média entre os nós, número médio de saltos na rota e desvio médio. Com o uso deste modelo também é possível obter o valor da frequência ótima utilizando uma função de otimização. Comparações entre a Taxa de Erro de Bits de um salto e fim-a fim também forem feitas, para diferentes valores de máximo ângulo de desvio na topologia de rede usada. Estas comparações demonstran quando pode ser mais convenente o uso de um salto ou múltiple-salto. Simulações Monte-Carlo e modelo forem comparados com o propósito de validar os resultados obtidos. Estas comparações demostram a grande similitude entre nosso modelo e as simulações de Monte-Carlo. Além disso foi possível o estudo do comportamento da SNIR e do BER variando importante parâmetros da rede tais como frequência de transmissão, número de nós, raio da esfera e máximo ângulo de desvio. Os resultados obtidos provarem que a SNIR para um salto diminui com o aumento do número de nós e o raio da esfera, mas aumenta com o incremento da potência de transmissão. O comportamento de BER é contrário ao comportamento de SNIR. Também foi possível observar a existência da frequência ótima, onde os melhores valores de SNIR e o BER são obtidos. ______________________________________________________________________________________________ ABSTRACT / The objective of this work is to nd a mathematical model that allow us to obtain the Signal-to-Noise plus Interference Ratio (SNIR), the One-Hop Bit Error Rate (BER) and the End-to-End Bit Error Rate for an Underwater Acoustic Network (UAN). Considering this, it was developed a model that includes the interference as an important impairment and for ALOHA MAC (Medium Access Control) protocol. In addition, it was necessary to obtain before several parameters from the network, such as, average distance of the hop, average distance between nodes, average distance to the central node, average number of hops and average deviation. With this model, it is also possible to nd the optimal value of frequency using an optimization function. It was made comparisons between the One-Hop BER and the End-to-End BER for various values of maximal deviation angle. This comparison shows when it is more adequate to either use one-hop or multi-hop. Finally, we compared numerical and Monte-Carlo simulation results, giving a rst validation to our model. These comparisons show a big similitude between the developed model and the Monte-Carlo simulation. In addition, it was possible to analyse the behaviour of the SNIR and BER by varying important parameters of the network, such as, transmission frequency, number of nodes and sphere radius among others. From the obtained results it was prove that the SNIR decreases with an increase from the number of nodes and the sphere radius, but increases with the transmission power. The End-to-End BER has an contrary behavior with the SNIR.