The master´s thesis is focussed on principles and characteristics of Powerline Communications (PLC), practical usage possibilities and advantages and disadvantage of it. There are described mudulations and a channel encoding which are in PLC used. The main part of the thesis deals with a design of a channel as transfer function through the use of two methods, an echo model and the ABCD matrix. After finishing of the design of transfer function the model of communication was created in the Matlab-Simulink program. There were used the narrowband modulations in the model and analyzed the bit error rate of the tranfer data. In the end all results were treated graphically and evaluated.

The thesis is focused on PLC technology issues and thus the data transmission over a power-line. This work describes characteristics of the PLC technology, its usage, functional principles and used modulation techniques. The main part of the work describes individual kinds of interferences in the network. The method of necessary steps against these interferences by using the right modulation and relevant coding is also described in the thesis. On the basis of theoretical knowledge, the models of interferences are realized in Matlab/Simulink. The simulative model of power-lines with random parameters is designed and realized for each elected techniques of modulation (BPSK, QPSK, ASK, FSK). The method of PLC channels modeling is chose as a multipath signal spreading for topology with one and two branching and the dependence of their transmission functions are inquired too. The analysis of interference influence on the data transmission is performed via the created models. All acquired results are compared and evaluated in the conclusion of this thesis.

The telecommunications technology has been developed tremendously as there has been an ever-increasing demand for more speed and reliability. The enormous increase in the number of smart phones and other data consuming devices, combined with the development of enhanced multimedia applications has resulted in a dramatic increase in the volume of mobile data traffic. In order to accommodate the growing needs, it is required to utilise the spectrum efficiently. The design of radio access technology plays an important role in the aspect of system performance. These radio access technologies are typically characterised by the multiple-access techniques used. Non-Orthogonal Multiple Access (NOMA) is a multiple access scheme proposed for 5G and it utilises the power domain which was not sufficiently utilised in the previous systems.        This thesis work is mainly focused on the performance analysis of the NOMA technique in mobile media (images). This analysis is achieved by transmitting a high definition image at various power levels to two users who are located at two different distances from the base station. The images are transmitted through suitable noise channels. An analysis is done on how NOMA copes with the users having poor channel conditions. The performance is analysed by comparing the output images at both the receivers based on the structural similarity index and bit error rate parameters.

Dans cette thèse une étude des performances des systèmes OFDM et FBMC/OQAM en présence d'amplificateur de puissance sans mémoire en terme de TEB est présentée. Ensuite, nous avons proposé une technique de linéarisation d'AP par pré-distorsion adaptative neuronale. Aussi, nous avons proposé deux techniques de correction des non-linéarités au niveau du récepteur. / In our work, we have studied the impact of in-band non linear distortions caused by PA on both OFDM and FBMC/OQAM systems. A theoretical approach was proposed to evaluate the BER performance for the two systems. This approach is based on modeling the in-band non-linear distortion with a complex gain and an uncorrelated additive white Gaussian noise, given by the Bussgang theorem. Then, we have proposed different techniques to compensate this NLD either on the transmitter or the receiver sides.

It is known that a matched filter is optimal for a signal corrupted by Gaussian noise. In a wireless environment, the received signal may be corrupted by Gaussian noise and a variety of other channel disturbances: cochannel interference, multiple access interference, large and small-scale fading, etc. Adaptive filtering is the usual approach to mitigating this channel distortion. Existing adaptive filtering techniques usually attempt to minimize the mean square error (MSE) of some aspect of the received signal, with respect to the desired aspect of that signal. Adaptive minimization of MSE does not always guarantee minimization of bit error rate (BER). The main focus of this research involves estimation of the probability density function (PDF) of the received signal; this PDF estimate is used to adaptively determine a solution that minimizes BER. To this end, a new adaptive procedure called the Minimum BER Estimation (MBE) algorithm has been developed. MBE shows improvement over the Least Mean Squares (LMS) algorithm for most simulations involving interference and in some multipath situations. Furthermore, the new algorithm is more robust than LMS to changes in algorithm parameters such as stepsize and window width. / Master of Science

No description available.

The design of an optical communication link must plan for the random effects of atmospheric turbulence. This study analyses data from an experiment which transmitted from a laser located 8 meters above ground over a 13 Km range to coherent detection devices approximately 162 meters above ground. The effects of a fading and surging beam wave were considered in regards to code techniques for error correction, amplitude modulation and hardware architecture schemes. This study simulated the use of arrays and large apertures for the receiving devices, and compared the resultant scintillation index with the theoretical calculations.

The success of the Internet-of-Things (IoT) paradigm relies on, among other things, developing energy-efficient communication techniques that can enable information exchange among billions of battery-operated IoT devices. With its technological capability of simultaneous information and energy transfer, ambient backscatter is quickly emerging as an appealing solution for this communication paradigm, especially for the links with low data rate requirements. However, many challenges and limitations of ambient backscatter have to be overcome for widespread adoption of the technology in future wireless networks. Motivated by this, we study the design and implementation of ambient backscatter systems, including non-coherent detection and encoding schemes, and investigate techniques such as multiple antenna interference cancellation and frequency-shift backscatter to improve the bit error rate performance of the designed ambient backscatter systems. First, the problem of coherent and semi-coherent ambient backscatter is investigated by evaluating the exact bit error rate (BER) of the system. The test statistic used for the signal detection is based on the averaging of energy of the received signal samples. It is important to highlight that the conditional distributions of this test statistic are derived using the central limit theorem (CLT) approximation in the literature. The characterization of the exact conditional distributions of the test statistic as non-central chi-squared random variable for the binary hypothesis testing problem is first handled in our study, which is a key contribution of this particular work. The evaluation of the maximum likelihood (ML) detection threshold is also explored which is found to be intractable. To overcome this, alternate strategies to approximate the ML threshold are proposed. In addition, several insights for system design and implementation are provided both from analytical and numerical standpoints. Second, the highly appealing non-coherent signal detection is explored in the context of ambient backscatter for a time-selective channel. Modeling the time-selective fading as a first-order autoregressive (AR) process, we implement a new detection architecture at the receiver based on the direct averaging of the received signal samples, which departs significantly from the energy averaging-based receivers considered in the literature. For the proposed setup, we characterize the exact asymptotic BER for both single-antenna (SA) and multi-antenna (MA) receivers, and demonstrate the robustness of the new architecture to timing errors. Our results demonstrate that the direct-link (DL) interference from the ambient power source leads to a BER floor in the SA receiver, which the MA receiver can avoid by estimating the angle of arrival (AoA) of the DL. The analysis further quantifies the effect of improved angular resolution on the BER as a function of the number of receive antennas. Third, the advantages of utilizing Manchester encoding for the data transmission in the context of non-coherent ambient backscatter have been explored. Specifically, encoding is shown to simplify the detection procedure at the receiver since the optimal decision rule is found to be independent of the system parameters. Through extensive numerical results, it is further shown that a backscatter system with Manchester encoding can achieve a signal-to-noise ratio (SNR) gain compared to the commonly used uncoded direct on-off keying (OOK) modulation, when used in conjunction with a multi-antenna receiver employing the direct-link cancellation. Fourth, the BER performance of frequency-shift ambient backscatter, which achieves the self-interference mitigation by spatially separating the reflected backscatter signal from the impending source signal, is investigated. The performance of the system is evaluated for a non-coherent receiver under slow fading in two different network setups: 1) a single interfering link coming from the ambient transmission occurring in the shifted frequency region, and 2) a large-scale network with multiple interfering signals coming from the backscatter nodes and ambient source devices transmitting in the band of interest. Modeling the interfering devices as a two dimensional Poisson point process (PPP), tools from stochastic geometry are utilized to evaluate the bit error rate for the large-scale network setup. / Doctor of Philosophy / The emerging paradigm of Internet-of-Things (IoT) has the capability of radically transforming the human experience. At the heart of this technology are the smart edge devices that will monitor everyday physical processes, communicate regularly with the other nodes in the network chain, and automatically take appropriate actions when necessary. Naturally, many challenges need to be tackled in order to realize the true potential of this technology. Most relevant to this dissertation are the problems of powering potentially billions of such devices and enabling low-power communication among them. Ambient backscatter has emerged as a useful technology to handle the aforementioned challenges of the IoT networks due to its capability to support the simultaneous transfer of information and energy. This technology allows devices to harvest energy from the ambient signals in the environment thereby making them self-sustainable, and in addition provide carrier signals for information exchange. Using these attributes of ambient backscatter, the devices can operate at very low power which is an important feature when considering the reliability requirements of the IoT networks. That said, the ambient backscatter technology needs to overcome many challenges before its widespread adoption in IoT networks. For example, the range of backscatter is limited in comparison to the conventional communication systems due to self-interference from the power source at a receiver. In addition, the probability of detecting the data in error at the receiver, characterized by the bit error rate (BER) metric, in the presence of wireless multipath is generally poor in ambient backscatter due to double path loss and fading effects observed for the backscatter link. Inspired by this, the aim of this dissertation is to come up with new architecture designs for the transmitter and receiver devices that can improve the BER performance. The key contributions of the dissertation include the analytical derivations of BER which provide insights on the system design and the main parameters impacting the system performance. The exact design of the optimal detection technique for a communication system is dependent on the channel behavior, mainly the time-varying nature in the case of a flat fading channel. Depending on the mobility of devices and scatterers present in the wireless channel, it can either be described as time-selective or time-nonselective. In the time-nonselective channels, coherent detection that requires channel state information (CSI) estimation using pilot signals can be implemented for ambient backscatter. On the other hand, non-coherent detection is preferred when the channel is time-selective since the CSI estimation is not feasible in such scenarios. In the first part of this dissertation, we analyze the performance of ambient backscatter in a point-to-point single-link system for both time-nonselective and time-selective channels. In particular, we determine the BER performance of coherent and non-coherent detection techniques for ambient backscatter systems in this line of work. In addition, we investigate the possibility of improving the BER performance using multi-antenna and coding techniques. Our analyses demonstrate that the use of multi-antenna and coding can result in tremendous improvement of the performance and simplification of the detection procedure, respectively. In the second part of the dissertation, we study the performance of ambient backscatter in a large-scale network and compare it to that of the point-to-point single-link system. By leveraging tools from stochastic geometry, we analytically characterize the BER performance of ambient backscatter in a field of interfering devices modeled as a Poisson point process.

Dans les systèmes radio mobiles, la diversité représente une technique efficace pour lutter contre l’évanouissement dû aux multi-trajets. La pleine diversité spatiale est atteinte dans les systèmes multiple-input multiple-output (MIMO). Mais, souvent l’intégration d’antennes multiples au niveau de l’émetteur ou du récepteur est coûteuse. Comme alternative, dans les réseaux sans fil multi-hop, la diversité coopérative garantit des gains de diversité spatiale en exploitant les techniques MIMO traditionnelles sans avoir besoin d’antennes multiples. En outre, la diversité coopérative fournit au réseau : un débit important, une énergie réduite et une couverture d’accès améliorée.Dans ce contexte, l’objectif de cette thèse est de concevoir des schémas de codage pour le canal à relais afin de réaliser une meilleure performance en termes de gain de diversité et de gain de codage. D’abord, nous étudions un système de turbo-codage distribué à L-relais en mode soft-decode-and-forward. Ensuite, nous proposons un système de turbocodage coopératif distribué à L-relais en utilisant la concaténation en parallèle des codes convolutifs. Enfin, afin d’améliorer la fiabilité de détection au niveau du noeud relais, nous proposons la technique de sélection d’antenne/relayage-soft. Pour une modulation BPSK, nous dérivons des expressions de la borne supérieure de la probabilité d’erreurbinaire où les différents sous-canaux sont supposés à évanouissement de Rayleigh, indépendants et pleinement entrelacés avec une information instantanée d’état de canal idéal. Une validation des résultats théoriques est également menée par la simulation. / Diversity provides an efficient method for combating multipath fading in mobile radio systems. One of the most common forms of spatial diversity is multiple-input multipleoutput (MIMO), where full diversity is obtained. However, embedding multiple antennas at the transmitter or the receiver can sometimes be expensive. As an alternative to collocated antennas, cooperative diversity in wireless multi-hop networks confirms their ability to achieve spatial diversity gains by exploiting the spatial diversity of the traditional MIMO techniques, without each node necessarily having multiple antennas. In addition, cooperative diversity has been shown to provide the network with importantthroughput, reduced energy requirements and improved access coverage.In light of this, the objective of this thesis is to devise coding schemes suitable for relay channels that aim at showing the best compromise between performance of diversity and coding gains. Firstly, we investigate a distributed turbo coding scheme dedicated to L-relay channels operating in the soft-decode-and-forward mode. Then, we present a proposed distributed turbo coded cooperative (DTCC) scheme, called parallel concatenated convolutional-based distributed coded cooperation. Finally, we investigate antenna/soft-relaying selection for DTCC networks in order to improve their end-to-end performance. Assuming BPSK transmission for fully interleaved channels with ideal channel state information, we define the explicit upper bounds for error probability inRayleigh fading channels with independent fading. Both theoretical limits and simulation results are presented to demonstrate the performances.

We are currently experiencing a rapid development of quantum information, a new branch of science, being an interdisciplinary of quantum physics, information theory, telecommunications, computer science, and many others. This new science branch was born in the middle of the eighties, developed rapidly during the nineties, and in the current decade has brought a technological breakthrough in creating secure quantum key distribution (QKD), quantum secret sharing, and exciting promises in diverse technological fields. Recent QKD experiments have achieved high rate QKD at 200 km distance in optical fiber. Significant QKD results have also been achieved in free-space. Due to the rapid broadband access deployment in many industrialized countries and the standing increasing transmission security treats, the natural development awaiting quantum communications, being a part of quantum information, is its migration into commercial switched telecom networks. Such a migration concerns both multiuser quantum key distribution and multiparty quantum secret sharing that have been the main goal of my PhD studies. They are also the main concern of the thesis. Our research efforts in multiuser QKD has led to a development of the five-user setup for transmissions over switched fiber networks in a star and in a tree configuration. We have achieved longer secure quantum information distances and implemented more nodes than other multi-user QKD experiments. The measurements have shown feasibility of multiuser QKD over switched fiber networks, using standard fiber telecom components. Since circular architecture networks are important parts of both intranets and the Internet, Sagnac QKD has also been a subject of our research efforts. The published experiments in this area have been very few and results were not encouraging, mainly due to the single mode fiber (SMF) birefringence. Our research has led to a development of a computer controlled birefringence compensation in Sagnac that open the door to both classical and quantum Sagnac applications. On the quantum secret sharing side, we have achieved the first quantum secret sharing experiment over telecom fiber in a five-party implementation using the "plug & play" setup and in a four-party implementation using Sagnac configuration. The setup measurements have shown feasibility and scalability of multiparty quantum communication over commercial telecom fiber networks.