Les formats de modulation avancés, codant l'information sur la phase, la polarisation ou plusieurs niveaux d'amplitude de la lumière reçoivent aujourd'hui un intérêt croissant. En effet, ceux-ci permettent d'atteindre une meilleure efficacité spectrale et par conséquent des débits plus élevés. Ces caractéristiques sont actuellement très recherchées dans les télécommunications pour répondre à la demande constante d'augmentation de capacité des transmissions optiques fibrées. L'essentiel du travail effectué porte sur la génération de tels signaux dans des sources photoniques monolithiques sur InP faisant appel à un concept nouveau de commutation de phases optiques préfixées avec des modulateurs électro-absorbants. Une comparaison de notre technologie intégrée avec la technologie actuelle de génération de formats de modulation avancés démontre des possibilités nouvelles de réduction de taille, de diminution de consommation énergétique et d'évolution en vitesse de modulation jusqu'à 56 GBauds. Suite à la validation, par simulations, d'architectures de transmetteurs spécifiques pour la génération de formats de modulation avancés, nous réalisons en salle blanche les circuits photoniques intégrés d'étude. Les caractérisations statiques confirment le fonctionnement de toutes les fonctions intégrées des circuits et soulignent l'efficacité de la filière technologique. Pour une première démonstration de fonctionnalité nous choisissons un transmetteur BPSK capable de générer une modulation de phase à 12,4 GB. Ce résultat démontre la plus petite source intégrée BPSK à l'heure actuelle. Un autre circuit capable de générer des formats de modulation plus complexes est aussi caractérisé

Orientador: Luiz Carlos Kretly / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-11T01:55:52Z (GMT). No. of bitstreams: 1 Silva_AndreTavoradeAlbuquerque_D.pdf: 5543671 bytes, checksum: 26990143f84fbd9e80d60304ebc8febc (MD5) Previous issue date: 2008 / Resumo: Este trabalho apresenta dois tópicos de pesquisa, o primeiro é referente ao projeto e desenvolvimento da tecnologia de fabricação de Chaves MEMS (Micro Electro Mechanical System) de RF e o segundo é o projeto de circuitos integrados. No que se refere a chaves MEMS, descreve-se o processo e a metodologia para projeto de Chaves MEMS paralela sobre linha de transmissão coplanar (CPW). A estrutura é composta de uma ponte metálica suspensa em ambos os lados por dois postes metálicos conectados ao plano de terra. As chaves são projetadas para uma baixa tensão de ativação (16 V) e com larga banda de operação em freqüência (400 MHz ¿ 4GHz) possibilitando seu uso na maioria dos padrões de sistemas de comunicação. Também é descrita a metodologia do projeto auxiliado por simulações eletromecânicas e eletromagnéticas e finalmente é apresentada a caracterização de 4 chaves construídas. Após extensa pesquisa na literatura técnico-científica, foi identificado que este é o primeiro trabalho no Brasil dedicado ao desenvolvimento de tecnologia de fabricação de chaves MEMS. Os projetos de circuitos integrados foram realizados em tecnologia CMOS 0,35 µm e incluem: multiplicador de tensão e oscilador em anel, chaveador SPDT (Single Pole Double Through), amplificador de baixo ruído e modulador BPSK. Sendo os circuitos multiplicador de tensão e oscilador em anel projetados para aplicações em chaves MEMS. Os circuitos SPDT, amplificador de baixo ruído e modulador BPSK são parte integrante de Front-End de RF, com recepção em 1,8 GHz (banda D - GSM) e transmissão em 868,3 MHz (padrão Zigbee). São descritos os guias de projeto para cada circuito com simulações e desenho de layout. Especificamente para os circuitos, multiplicador de tensão e amplificador de baixo ruído são apresentadas novas topologias. Estes dois circuitos estão em via de preparação de patente. Finalmente, as caracterizações de cada circuito são apresentadas, com exceção do modulador BPSK / Abstract: This work presents two main research topics: the first refers to the design and the development of a fabrication technology for RF MEMS (Micro Electromechanical Systems) Switches and the second to the design of RF integrated circuits. In relation to MEMS switches, it describes the fabrication process and the design methodology of Shunt MEMS switches over a coplanar transmission line (CPW). The structure is composed by a metallic bridge anchored on both ends by two metallic posts connected to the ground plane. The switches are designed to operate at low activation voltage (16 V) and with a large band of operating frequency (400 MHz ¿ 4GHz), making possible its use in many communication systems. It is also described a design methodology assisted by electromechanical and electromagnetic simulations, and finally it is presented the characterization of 4 switches. After extensive search in technical literature, it was identified that this is the first work in Brazil dedicated to the technology development and fabrication of MEMS switches. The integrated circuits designs are realized in CMOS 0.35 µm technology and includes: charge pump and ring oscillator, SPDT switcher (Single Pole Double Through), low noise amplifier and BPSK modulator. The circuits charge pump and ring oscillator are intended to MEMS switches applications. The circuits SPDT, low noise amplifier and BPSK modulator are integrating parts of a RF Front-End, with reception at 1.8 GHz (band D ¿ GSM) and transmission at 868.3 MHz (ZigBee standard). The design guidelines to each circuit are described, with simulations and layout drawing. Specifically to the circuits charge pump and low noise amplifier, it is presented new topologies with innovation in the area. These two circuits have their patent process under preparation. Finally, the characterization of each circuit is presented, with exception of the BPSK modulator / Doutorado / Eletrônica, Microeletrônica e Optoeletrônica / Doutor em Engenharia Elétrica

Cognitive radio is one of the modern techniques for wireless communication systems to utilize the unused spread spectrum effectively. This novel paradigm makes wireless communication possible with less interference. In our work we have investigated one of the functions of cogni- tive radio called spectrum sensing. We have specifically used the method of Cyclostationary fea- ture detection. Spectrum sensing is also a very effective method to detect spectrum holes and to utilize them. We have implemented spectrum sensing technique in these experiments. A signal is randomly generated which could be Binary shift phase keying (BPSK) or Quadrature phase shift keying (QPSK), then this modulated signal is passed through Additive white Gaussian noise (AWGN), The output signal of AWGN is then passed to cyclostationary detector, various func- tions are pre-implemented inside cyclostationary detector and this includes Fast Fourier trans- form (FFT), Auto correlation, Sliding window to identify that signal. Finally we have demon- strated the results of signal to noise ratio to show the performance evaluation of our experiments. The results have shown a decreasing trend in the probability of incorrect detection by increasing signal to noise ratio.

ITC/USA 2011 Conference Proceedings / The Forty-Seventh Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2011 / Bally's Las Vegas, Las Vegas, Nevada / The Central Test and Evaluation Investment Program (CTEIP) Integrated Network Enhanced Telemetry (iNET) program is currently testing networked telemetry transceivers (IP.TM-Tx/Rx) using the Internet Protocol (IP), for use in telemetry (TM) channels. A unique characteristic of networked telemetry channel is packet drops due to radio frequency (RF) signal dynamics, i.e., terrain, weather, aircraft attitude, manmade objects, etc.. One of the key measures of the IP.TMTx/ Rx is reliability is link availability (LA), and a key element of LA is time to resynchronize after RF link loss.

No description available.

Ultra-wideband (UWB) communication technology offers inherent advantages such as the ability to coexist with previously allocated Federal Communications Commission (FCC) frequencies, simple transceiver architecture, and high performance in noisy environments. Spread spectrum techniques offer additional improvements beyond the conventional pulse-based UWB communications. This dissertation implements a multiple-access UWB communication system using a surface acoustic wave (SAW) correlator receiver with orthogonal frequency coding and software defined radio (SDR) base station transmitter. Orthogonal frequency coding (OFC) and pseudorandom noise (PN) coding provide a means for spreading of the UWB data. The use of orthogonal frequency coding (OFC) increases the correlator processing gain (PG) beyond that of code division multiple access (CDMA); providing added code diversity, improved pulse ambiguity, and superior performance in noisy environments. Use of SAW correlators reduces the complexity and power requirements of the receiver architecture by eliminating many of the components needed and reducing the signal processing and timing requirements necessary for digital matched filtering of the complex spreading signal. The OFC receiver correlator code sequence is hard-coded in the device due to the physical SAW implementation. The use of modern SDR forms a dynamic base station architecture which is able to programmatically generate a digitally modulated transmit signal. An embedded Xilinx Zynq ™ system on chip (SoC) technology was used to implement the SDR system; taking advantage of recent advances in digital-to-analog converter (DAC) sampling rates. SDR waveform samples are generated in baseband in-phase and quadrature (I & Q) pairs and upconverted to a 491.52 MHz operational frequency. The development of the OFC SAW correlator ultimately used in the receiver is presented along with a variety of advanced SAW correlator device embodiments. Each SAW correlator device was fabricated on lithium niobate (LiNbO3) with fractional bandwidths in excess of 20%. The SAW correlator device presented for use in system was implemented with a center frequency of 491.52 MHz; matching SDR transmit frequency. Parasitic electromagnetic feedthrough becomes problematic in the packaged SAW correlator after packaging and fixturing due to the wide bandwidths and high operational frequency. The techniques for reduction of parasitic feedthrough are discussed with before and after results showing approximately 10:1 improvement. Correlation and demodulation results are presented using the SAW correlator receiver under operation in an UWB communication system. Bipolar phase shift keying (BPSK) techniques demonstrate OFC modulation and demodulation for a test binary bit sequence. Matched OFC code reception is compared to a mismatched, or cross-correlated, sequence after correlation and demodulation. Finally, the signal-to-noise power ratio (SNR) performance results for the SAW correlator under corruption of a wideband noise source are presented.

Η πληθώρα των εφαρμογών που μπορεί να εξυπηρετήσει η τεχνολογία Υπερευρείας Ζώνης (UWB), από τα ασύρματα προσωπικά δίκτυα υψηλών ταχυτήτων, μέχρι τα ασύρματα δίκτυα αισθητήρων με δυνατότητες ακριβούς εντοπισμού θέσης, και τα ασύρματα δίκτυα ιατρικών αισθητήρων, έχει προκαλέσει έντονο ερευνητικό ενδιαφέρον γύρω από τις υλοποιήσεις UWB συστημάτων. Η ασυνήθιστα μεγάλη περιοχή συχνοτήτων που έχει ανατεθεί στο UWB, από τα 3.1-10.6 GHz, επιτρέπει την επίτευξη υψηλών ταχυτήτων με απλά σχήματα διαμόρφωσης, ωστόσο, λόγω της διαμοίρασης του φάσματος με τις υφιστάμενες τεχνολογίες ασύρματης δικτύωσης, οι UWB εκπομπές πρέπει να περιορίζονται σε ισχύ κάτω από το κατώφλι των -41.3 dBm/MHz, ικανοποιώντας πολύ αυστηρές μάσκες εκπομπής που εισάγουν έντονες προκλήσεις στη σχεδίαση των πομπών. Η υλοποίηση αναδιατάξιμων UWB πομπών σε σύγχρονες CMOS τεχνολογίες, με υψηλή φασματική ευελιξία, ταχύτητα και ποιότητα διαμόρφωσης, καθώς και με χαμηλή κατανάλωση, αποτέλεσε το αντικείμενο της συγκεκριμένης διατριβής. Υιοθετώντας την αρχιτεκτονική Multi-Band Impulse-Radio (MB-IR) σε συνδυασμό με την τεχνική Direct Sequence BPSK, η έρευνα προσανατολίστηκε προς την ανάπτυξη καινοτόμων μονάδων βασικής ζώνης, με στόχο την ενεργειακά αποδοτική αντιστροφή Γκαουσιανών μορφοποιημένων παλμών υψηλής ποιότητας φάσματος και διάρκειας μικρότερης ακόμα και από 1 nsec. Προς αυτή την κατεύθυνση, αναπτύχθηκε μια καινοτόμα γεννήτρια Γκαουσιανών παλμών με πολύ χαμηλούς πλευρικούς λοβούς στο φάσμα, τυπικά κάτω από -40 dB, ώστε να υποστηρίζονται οι αυστηρότερες μάσκες εκπομπής ή και μελλοντικές. Η σχεδίασης της προτεινόμενης γεννήτριας είχε ως κριτήριο την ευέλικτη ρύθμιση της διάρκειας των παραγόμενων παλμών, και αξιοποίησε τη χαρακτηριστική μεταφοράς τάσης ενός ωμικά φορτωμένου, ασύμμετρου CMOS αντιστροφέα. Η γεννήτρια βασίζεται κυρίως σε ψηφιακά κυκλώματα πολύ χαμηλής τάσης και, σε σύγκριση με τις υφιστάμενες υλοποιήσεις, παρουσιάζει σημαντικό προβάδισμα στον τομέα της ταχύτητας, καθώς και στο πλάτος εξόδου, η μεγάλη τιμή του οποίου χαλαρώνει σημαντικά τη σχεδίαση του RF front end. Η γεννήτρια μελετήθηκε διεξοδικά, διεξήχθη ανάλυση κλιμάκωσης, έγινε εξαγωγή σχεδιαστικών εξισώσεων και αναπτύχθηκαν εργαλεία λογισμικού για την αυτοματοποιημένη σχεδίασή της. Για περαιτέρω αύξηση της ταχύτητας των παλμικών σημάτων εφαρμόσθηκε ειδική σχεδίαση, η οποία αντιπραγματεύεται την ταχύτητα με το επίπεδο των λοβών του φάσματος. Για την αποδοτική BSPK διαμόρφωση των Γκαουσιανών παλμών αναπτύχθηκε ειδική τοπολογία “Μεταγωγής Σήματος Πυροδότησης Πλήρους Ισορροπίας με Up-Conversion”. Η τοπολογία αυτή, σε αντίθεση με τις ανταγωνιστικές τοπολογίες, αποφεύγει την αντιστροφή του παλμού με αναλογικά κυκλώματα υψηλής κατανάλωσης, αλλά και την αναλογική μεταγωγή, καθώς η διαμόρφωση λαμβάνει χώρα πριν από την παραγωγή των παλμών. Παράλληλα, επιτυγχάνονται υψηλοί ρυθμοί, καθώς και υψηλή ποιότητα διαμόρφωσης λόγω των ισορροπημένων μονοπατιών της τοπολογίας. Η γεννήτρια μαζί με το διαμορφωτή αποτελούν τις καινοτόμες παρεμβάσεις στη μονάδα Βασικής Ζώνης του προτεινόμενου πομπού. Για την ολοκλήρωση της λειτουργικότητας του πομπού, αναπτύχθηκε ένα RF front end, το οποίο αποτελείται από έναν διπλά ισορροπημένο μίκτη, έναν LO buffer, ένα μετατροπέα διαφορικού σήματος σε απλό, και έναν ενισχυτή ισχύος, ο οποίος είναι προσαρμοσμένος στα 50 Ohms, χωρίς να απαιτεί κανένα εξωτερικό στοιχείο. Το RF front end ολοκληρώθηκε μαζί με τη μονάδα βασικής ζώνης, και ο ολοκληρωμένος πομπός κατασκευάστηκε σε τεχνολογία CMOS 130 nm. Το ολοκληρωμένο προσαρτήθηκε στην RF πλακέτα συστήματος με την τεχνική Chip on Board. Για την επιτυχία του συστήματος με την πρώτη προσπάθεια έγινε συσχεδίαση σε επίπεδο IC-Package-PCB, δίνοντας ιδιαίτερη έμφαση στα ζητήματα Signal/Power Integrity. Ο πομπός παρουσίασε την υψηλότερη ταχύτητα από τις ανταγωνιστικές MB-IR UWB υλοποιήσεις, ίση με 1.5 Gbps, με αντίστοιχη ενεργειακή αποδοτικότητα 21 pJoule/bit και μέτρο διανυσματικού σφάλματος 5.5%. Ο πομπός βελτίωσε τους πλευρικούς λοβούς στο φάσμα περισσότερο από 10 dB, ενώ η διατριβή, εκμεταλλευόμενη την αναδιαταξιμότητα του πομπού, παρουσιάζει, επιπλέον, τις πρώτες μετρήσεις σε ταχύτητες εκατοντάδων Mbps για ικανοποίηση της χαμηλής ζώνης της πρόσφατα θεσμοθετημένης, και εξαιρετικά αυστηρής, ευρωπαϊκής μάσκας εκπομπής. / The multitude of applications that Ultra-Wideband (UWB) technology can serve, from high-speed Wireless Personal Area Networks, to Wireless Sensor Networks with precision Geolocation abilities, and Wireless Medical Networks, has attracted intense research interest in the implementation of UWB systems. The unusually wide range of frequencies assigned to UWB, from 3.1-10.6 GHz, allows UWB systems employing low order modulation schemes to enjoy high throughput at low power consumption. However, since UWB shares the spectrum with existing wireless networking technologies, UWB emissions must be limited to a power spectral density below the threshold of -41.3 dBm/MHz, satisfying very stringent emission masks and introducing great challenges in the design of UWB transmitters. The subject of this thesis is the design of low power, fully integrated, reconfigurable CMOS UWB transmitters, with high spectral flexibility, high speed and high modulation quality. Adopting the Multi-Band Impulse-Radio architecture, in conjunction with the Direct Sequence BPSK modulation, the research focused on the development of a baseband unit, able to precisely invert Gaussian shaped, subnanosecond pulses. The key contributions of this thesis are a CMOS Gaussian Pulse Generator and a BSPK modulation topology, which jointly constitute the proposed baseband unit. The Pulse Generator (PG) is based on non-linear shaping, so as to facilitate the configurability of the output pulse duration, and exploits the voltage transfer characteristic of a Resistive Loaded Asymmetrical CMOS Inverter, which results in spectral sidelobes typically better than -40 dB. The PG incorporates mostly-digital low voltage circuits, while the MOSFET devices that undertake the pulse shaping avoid exclusive operation in weak inversion, in contrast to previous implementations. Consequently, the proposed CMOS PG is able to support higher throughput, as well as higher output amplitude, which relaxes considerably the design of the RF front end. This thesis presents a systematic design procedure and a scaling analysis of the non-linear pulse shaper. Moreover, in order to further increase the speed, a special PRF boost technique is proposed, which trades off speed and spectral efficiency for the spectral sidelobes level. Regarding the BPSK modulator, this work introduces the “Trigger Switching Fully Balanced Up-Conversion” topology, which avoids the use of power-hungry and distortion-prone analog circuits for the accurate inversion of the subnanosecond shaped pulses, as well as avoids the application of analog waveform switching to the baseband pulses, since the baseband modulation takes place before the generation of the pulses. The digital nature of the switching lends itself to high data rates, while the balanced paths of the topology ensure high modulation quality with minimal design effort. Wafer probing measurements confirmed the high performance of the baseband unit. The functionality of the transmitter was completed by the development of an RF front end which consists of a double balanced mixer, an LO buffer, a differential to single-ended (DtoSE) converter, and a power amplifier which is ready to drive a 50 Ohms load without requiring any off-chip components. The integrated transmitter, which incorporates the proposed baseband unit and the RF front end, was fabricated in 130 nm CMOS technology. The transmitter RFIC was directly attached to the system RF PCB using the Chip-on-Board packaging option. The First-Pass success of the system was ensured by paying particular attention to Signal/Power Integrity issues and following an IC-Package-PCB co-design procedure. The transmitter was measured up to 1.5 Gbps, which, to the author’s knowledge, was the highest speed amongst the competitive Multi-Band Impulse-Radio UWB implementations in the literature. The corresponding energy efficiency was 21 pJoule/bit and the Error Vector Magnitude (EVM) 5.5%, while the proposed transmitter improved the spectral sidelobes by over 10 dB. Exploiting the reconfigurability of the transmitter, this thesis presents the first measurements at multi-Mbps speeds that completely meet the final version of the European spectrum emission mask.

Parameter estimation and signal detection are the two key components of a wireless communication system. They directly impact the bit-error-ratio (BER) performance of the system. Several criteria have been successfully applied for parameter estimation and signal detection. They include maximum likelihood (ML), maximum a-posteriori probability (MAP), least square (LS) and minimum mean square error (MMSE) etc. In the linear detection framework, linear MMSE (LMMSE) and LS are the most popular ones. Nevertheless, these criteria do not necessarily minimize the BER, which is one of the key aspect of any communication receiver design. Thus, minimization of BER is tantamount to an important design criterion for a wireless receiver, the minimum bit/symbol error ratio (MBER/MSER). We term this design criterion as the minimum-error-probability (MEP). In this thesis, parameter estimation and signal detection have been extensively studied based on the MEP framework for various unexplored scenar-ios of a wireless communication system. Thus, this thesis has two broad categories of explorations, first parameter estimation and then signal detection. Traditionally, the MEP criterion has been well studied in the context of the discrete signal detection in the last one decade, albeit we explore this framework for the continuous parameter es-timation. We first use this framework for channel estimation in a frequency flat fading single-input single-output (SISO) system and then extend this framework to the carrier frequency offset (CFO) estimation of multi-user MIMO OFDM system. We observe a reasonably good SNR improvement to the tune of 1 to 2.5 dB at a fixed BER (tentatively at 10−3). In this context, it is extended to the scenario of multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) or MIMO-OFDM with pa-rameter estimation error statistics obtained from LMMSE only and checked its effect at the equalizer design using MEP and LMMSE criteria. In the second exploration of the MEP criterion, it is explored for signal detection in the context of MIMO-relay and MIMO systems. Various low complexity solutions are proposed to alleviate the effect of high computational complexity for the MIMO-relay. We also consider various configurations of relay like cognitive, parallel and multi-hop relaying. We also propose a data trans-mission scheme with a rate of 1/Ns (Ns is the number of antennas at the transmitter) with the help of the MEP criterion to design various components. In all these cases, we obtain considerable BER improvement compared to the existing solutions.

This thesis deals with optical synthesis of unmodulated and modulated microwave signals. Generation of microwave signals based on optical heterodyning is discussed in detail. The effect of phase noise of laser on heterodyned output has been studied for different phase noise profiles. Towards this, we propose a generic algorithm to numerically model the linewidth broadening of a laser due to phase noise. Generation of microwave signals is demonstrated practically by conducting an optical heterodyning experiment. Signals ranging in frequency from 12.5 MHz to 27 GHz have been generated. Limitations of optical heterodyning based approach in terms of phase noise performance and frequency stability are discussed and practically demonstrated. A hardware-efficient Optical Phase Locked Loop (OPLL) is proposed to overcome these issues. Phase noise tracking performance of the proposed OPLL has been experimentally demonstrated. Phase noise values as low as -105 dBc/Hz at 10 KHz offset have been achieved. Optical modulators, owing to their extremely low electro-optic response time, can support high frequency modulating signals. This makes them highly attractive in comparison to their microwave counterparts. In this thesis, we propose techniques to generate microwave signals modulated at very high bit rates by down-converting the corresponding modulated optical signals to microwave domain. Down-conversion required for this process is achieved by optical heterodyning. The proposed concept has been theoretically analyzed, simulated and experimentally validated. Amplitude Modulated and ASK modulated microwave signals have been generated as Proof-of-Concept. Limitations posed by OPLL in generation of angle modulated microwave signals by optical heterodyning have been brought out. Schemes overcoming these limitations have been proposed towards generation of BPSK and QPSK modulated microwave signals. Integrated Optics (IO) technology has been studied as a means of implementation of the proposed concepts. IO components like Sinusoidal bends, Y-branch splitters and Electro-Optic-Modulators (EOMs) have been designed towards optical synthesis of modulated microwave signals. Propagation of modulated optical signal through these IO components has also been studied. An all-optic scheme based on Optical Beam Forming is proposed for transmission of QPSK modulated signal. Limitation of phase-shifting based approach, in terms of beam-squint, has been brought out. True-Time-Delay based approach has been proposed for applications demanding wide instantaneous bandwidth to avoid beam-squint. Algorithms / numerical methods required for analyses and simulations associated with the above-mentioned tasks have been evolved. This study is envisaged to provide useful insight into the realization of high-speed, compact, light-weight data transmitting systems based on Integrated Optics for future onboard spacecraft applications. This work, we believe, is a step towards realization of an Integrated Optic System-on-Chip solution for specific microwave data transmission applications.

The common objective of this project is implementation of software defined radio (SDR) into FPGA. The text contains review and comparison of several hardware concepts intended for SDRs implementation then the methods for digital implementation of various components of radios as the filters, mixers and others are mentioned. Part of the text introduces used hardware platform and describes software support for designing, simulations and implementation into hardware. Significant part of project describes complex of external hardware components as filter, amplifier and control panel designed and built within the project realization. But the main part of project demonstrates design of the software solution of radio receiver. There is specified architecture of radio for FM broadcast receiving, next the more complex systems with carrier recovery algorithm are presented. These systems are able to work with AM, BPSK and QPSK modulations. It is possible to implement all these receivers into hardware and verify their operation. The practical laboratory theme has been outlined within the project run.