This work explores the application of various power amplifier design techniques for mobile communications. Several circuit configurations including class A amplifier, Doherty amplifier and power combining amplifier have been developed, which are to improve the performance of power amplifiers in terms of power added efficiency transmission power and bandwidth. In chapter 2, the cascode PA adopting tuning capacitor structure is proposed and implemented to enhance the efficiency. In chapter 3, a novel Doherty amplifier configuration using a 3-stage polyphase filter as power splitter is introduced. Moreover, the second harmonic cancellation function of balun combining PA is analysed and verified with experimental results in chapter 4. The fully integrated cascode class A amplifier adopts RC negative feedback, which is to enhance bandwidth and input/output matching. The integrated choke inductor compensating the parasitic capacitor of transistors has very low quality factor, which decreases the efficiency of the power amplifier. To reduce the inductance value of the choke inductor, a tuning capacitor is connected in parallel with the choke inductor. As a result, the inductor resistance is reduced as well, which diminishes the power consumption induced by the resistance of the choke inductor. This proposed PA configuration is validated by simulation results with the PAE improved by 3 % at the 1 dB compression point compared to the topology without tuning capacitor. The experimental results demonstrate a PA which delivers an output power of 21.3 dBm with PAE of 21 % at the 1 dB compression point. The Doherty amplifier with 2-way Wilkinson power splitter is integrated in a 0.9 mm×1.8 mm chip. The main and peak amplifier adopt cascode configuration to improve the stability of the Doherty amplifier. To minimize the chip size, the quarter wave transmission line in the topology is replaced by π-type lumped element equivalent network. To increase the operating bandwidth, the Doherty amplifier configuration using a 3-stage polyphase filter as power splitter is proposed. The topology consists of 3-stage RC polyphase filter, drive amplifiers, main amplifier, peak amplifier, and impedance inverter. By employing the polyphase filter, the quarter-wave transmission line at the input of the peak amplifier for compensating the phase shift of the impedance inverter is eliminated. According to the analysis of the polyphase filter prototype, the 3-stage polyphase filter is selected, and the component parameters are determined. The main amplifier and peak amplifier are using differential cascode configuration. The drive amplifier is to increase the power gain and provide proper impedance matching for the Doherty amplifier. The results demonstrate an outstanding broadband Doherty amplifier with a bandwidth of 1.8 GHz. The chip temperature rises dramatically due to the high power consumption of power amplifier. Consequently, the collector currents of the SiGe transistors are varying with the changing temperature, which deteriorates the PA performance. In the improved 3-stage PPF Doherty design, the bias voltages of the transistors in the first version 3-stage PPF Doherty amplifier are replaced by reference currents feeding through bias circuits. With current sources providing bias current to the transistors, the performance of the improved Doherty amplifier is enhanced. The power combining PAs are constructed on FR-4 PCB boards using discrete components. The single ended power amplifier in the power combining PA is built with high linearity HEMT transistor. The balun combining PA has an advantage of second harmonic cancellation, which is validated by both analysis and measurements. Moreover, power combining PAs with 2-way transmission line and lumped element Wilkinson power divider are designed. The transmission lines in these designs are analyzed using EM simulation tool and verified with testing structures on PCB boards.

Die vorliegende Arbeit beschäftigt sich mit dem Konzept der radial nicht-oszillierenden, zeitlich stabilen ultrakurzen Bessel ähnlichen Strahlen oder "Nadelstrahlen" ("needle beams"), die zu einer Klasse von optischen hochlokalisierten Wellenpaketen generalisiert werden. Hierbei wird die Theorie über das räumlich-zeitlichen Ausbreitungsverhaltens von nicht auseinanderdriftenden Nadelstrahlen mit Pulsdauern von kleiner als 10 fs näher diskutiert. Dies wird durch eine systematische Darstellung der Methoden zur Generierung und Detektierung von lokalisierten Wellen komplettiert, die ein optischen Drehmoment tragen. Für die Erzeugung von HLWs kommen räumliche Lichtmodulatoren zum Einsatz, die ein flexibles Zuschneiden von Wellenpaketen mit der Dauer weniger Zyklen des EM-Feldes erlauben. Es wird gezeigt, dass solche optischen Pulse sich über beträchtliche Entfernungen ausbreiten, ohne dass sich dabei signifikant der Strahldurchmesser vergrößert oder der Puls zeitlich verbreitert. In variabler Weise werden verschiedene geometrische (z.B. ringförmige) Lichtverteilungen erzeugt. Anwendungspotential findet sich insbesondere in den Techniken der räumlichen Pulsformung und Diagnostik. Als besonders wichtiger Ansatz ist der Zeit-Wellenfront-Sensor zu erwähnen, welcher die nichtlineare, mehrkanalige Autokorrelation, die Wellenfrontdetektion mittels nichtdiffraktiver Teilstrahlen nach dem Shack-Hartmann-Prinzip und eine adaptive Funktionalität miteinander vorteilhaft verbindet. Das enorme Potential solcher Ansätze wird durch die hohe Genauigkeit orts-, winkel- und zeitabhängiger Rekonstruktionen der Wellenpakete nachgewiesen. Darüber hinaus ermöglicht das räumliche Kodieren und anschließende Verfolgen der Teilstrahlen eine wesentliche Verbesserung der Identifikation relevanter Parameter von Verteilungsfunktionen. Schließlich werden erste Schritte zur experimentellen Generation von optischen "light bullets" mit ganzzahligen und fraktalen orbitalen Drehmomenten präsentiert. / This thesis deals with the concept of radially non-oscillating, temporally stable ultrashort-pulsed Bessel-like beams or "needle pulses", which are an example of a highly localized wave packet (HLW). HLWs are the closest approximation of linear-optical light bullets and provide specific benefits compared to conventional Gaussian-like light bullets. The spatio-temporally nonspreading propagation behavior of few-cycle needle beams of less than 10 fs duration will be theoretically discussed in detail. An overview of the generation and detection of localized waves carrying an orbital angular momentum is also given. High fidelity spatial light modulators are used for the generation of HLWs. The flexible tailoring of few-cycle wave packets at near-infrared wavelengths is reported. It is shown that such pulses propagate over a huge depth of focus, neither significantly changing their spot size or nor the pulse duration. Variable geometrical distributions like circular disks, rings, or bars of light are shaped and exploited as building blocks for structures of higher complexity. Another section of the thesis emphasizes the numerous potential applications of related techniques for an optimized two-dimensional spatial pulse shaping and diagnostics (reduce ambiguities) based on localized waves. As a particularly important example, time-wavefront sensing is used to combine nonlinear multichannel autocorrelation with Shack-Hartmann wavefront sensing by means of localized sub-beams and adaptive functionality. The capabilities of such devices are illustrated by the results of angular and temporal mapping of few-cycle wave packets. Moreover, spatial encoding and subsequent tracking of individual sub-beams, even at incident angles of up to 50°, enables to significantly improve the spot recognition. Finally, first steps towards the generation of optical light bullets carrying integer or non-integer orbital angular momenta are presented.