The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.

The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.