This thesis presents the development of a micro-aspirator chip using vacuum expanded microchannels for mechanical characterization of single cells. Mechanical properties of cells can offer valuable insights into the pathogenic basis of diseases and can serve as a biomarker to identify cells depending on disease state, and thus have the potential for use in human disease diagnostic applications. Micropipette aspiration and atomic force microscopy (AFM) are the most commonly used techniques for measuring mechanical properties of single cells. Though powerful and versatile, both methods have two drawbacks. First, micromanipulation of glass micropipettes and AFM tips require expertise and extensive operator skills. Second, the serial manipulation process severely limits the throughput. Although recently reported microfluidic micropipette device showed the potential of microfluidic chip type micropipette aspiration, difficulty in cell trapping and unnatural cell deformation remain to be solved. In order to address these limitations, a high-throughput micro-aspirator chip, which can deliver, trap, and deform multiple cells simultaneously with single-cell resolution without skill-dependent micromanipulation was developed. The micro-aspirator chip is composed of 20 arrays of cell traps and aspiration channels. The principle of cell trapping is based on differences in flow resistance inside the microfluidic channels. Once the first cell trap is filled with a cell, the next cell coming in passes by the trap and is captured in the next trap. After all traps are filled with cells, negative pressure can then be applied to the integrated aspiration channels using hydrostatic pressure. The aspiration channels are positioned at the center of a trapped cell both in vertical and horizontal directions to obtain a good seal just like a traditional micropipette, a design made possible through a vacuum expanded raised microfluidic channel fabrication technique. Device operation was demonstrated using HeLa cells. The cell trapping efficiency was almost 100 percent. Using this device, Young's modulus of 1.3 ± 0.8 kPa (n = 54) was obtained for HeLa cells. Device to device variation was less than 15.2 percent (n = 3), showing good repeatability of the device. No dependence of the Young's modulus on the cell diameter was found.

The broad objective of this research is to examine the relationship between the cellular micromechanical environment and disease progression in cancer. The mechanical stiffness of cancerous tissue is a key feature that distinguishes it from normal tissue and thus facilitates its detection clinically. While numerous inroads have been achieved toward elucidating molecular mechanisms that underlie diseases such as cancer, quantitative characterization of associated cellular mechanical properties and biophysical attributes remains largely incomplete. To this end, the present research provides insight into the following questions: (1) What is the effect of extracellular matrix (ECM) stiffness and architecture on internal cancer cell rheology and cytoskeletal organization? (2) What are the integrated effects of ECM stiffness and cell metastatic potential on the intracellular rheology and morphology of breast cancer cells? (3) What are the integrated effects of ECM stiffness, ECM architecture, and cell metastatic potential on the motility of breast cancer cells? To examine these phenomena, the present research utilizes a multidisciplinary engineering approach that integrates experimental rheology, theoretical mechanics, confocal microscopy, computational algorithms, and experimental cell biology. Briefly, genetically altered cancer-mimicking cells are cultured within synthetic ECMs of varying mechanical stiffness and structure, where they are then observed using time-lapsed confocal microscopy. Image analyses and computational algorithms are then employed to extract measures of cell migration speed and intracellular stiffness via particle-tracking microrheology techniques. Major results show that ECM stiffness elicits an intracellular mechanical response only within the framework of physiologically relevant matrix environments and that a key cell-matrix attachment protein (the integrin) plays an essential role in this phenomenon. Additional results indicate that a well-known breast cancer-associated biomarker (ErbB2) is responsible for sensitizing mammary cells to ECM stiffness. Finally, results also show that a switch in ECM architecture significantly hinders the migratory capacity of ErbB2-associated cells, which may explain why the ErbB2 biomarker is detected with much higher frequency in early stage breast cancer than in later stage invasive and metastatic cancers. In total, these findings inform the fields of mechanobiology and cancer biology by systematically linking cell rheology, cell motility, matrix mechanics, and disease progression in cancer. / text

No description available.

Chitosan is a biocompatible and biodegradable mucoadhesive polymer with unique advantages, such as the distinct trait of opening the junctions to allow paracellular transport of antigen and good tolerability. However, the poor solubility of chitosan in neutral or alkalinized media has restricted its applications in the pharmaceutical field. Chitosan can be easily carboxymethylated to improve its solubility in aqueous media, while its biodegradability and biocompatibility are preserved. Apart from this, carboxymethyl chitosan (CMCS) can be easily processed into nanoparticles which highlight its suitability and extensive usage for preparing different drug delivery formulations. The present study deals with the development and characterization of a delivery system based on CMCS nanoparticles using ovalbumin as model protein. We demonstrated that ovalbumin loaded nanoparticles were successfully synthetized using calcium chloride as a cross-linker by ionic gelation. The nanoparticles exhibited an average size of approximately 169 nm and presented a pseudo-spherical shape. The nanoparticles size increased according to the addition of CaCl2 due to the strong electrostatic attraction. During storage the nanoparticles size increased was attributed to swelling and aggregation. The loading efficiency of ovalbumin was found to be 17%. Confocal microscopy clearly showed the association between ovalbumin and CMCS chains into nanoparticles. Therefore, we suggest these nanoparticles can be considered as an attractive and promising carrier candidate for proteins and antigens. The major challenge that limits the use of such carriers is their instability in an aqueous medium. Thus, the next step of this work was to determine the robustness of several formulations using distinct freeze-drying protocols. This study demonstrated that mannitol in concentration of 10% (w/v) is well suited to preserve ovalbumin loaded CMCS nanocapsules from aggregation during lyophilization and subsequent reconstitution. Importantly, the results showed that an annealing step has a huge impact on porosity of freeze-dried cake by nearly complete crystallization of mannitol, once the crystalline matrix prevents the partial collapse and the formation of larger pores observed without annealing. Therefore, the usual observation that annealing increases the pore size due to growth of ice crystal size does not always apply, at least when crystallization of solute is involved. Since all characterizations and stability studies had been performed, the main purpose of this study was to develop a stable antigen delivery system for oral immunization using CMCS and inactivated rabies virus (RV) as the antigen. RV loaded nanoparticles was found to enhance both systemic (IgG) and local (IgA) immune responses against RV after oral delivery in mice. The effective doses 50% were 50-times higher than the negative controls, indicating that the immune response started only after the third boosting dose. Furthermore, enough neutralizing antibodies was produced to be protected against the harmful effects of the rabies virus. It is therefore concluded, that the CMCS nanoparticles formulated in this study, are suitable for oral vaccine delivery, and can be suggested as a promising delivery system for a diverse range of antigens as well as a gene/protein delivery system, especially for those positively charged. Since several approaches show that effective intervention in airway allergic inflammation can be achieved with allergen-activated interleukin-10-secreting cells, the final part of this work was dedicated to assessing whether IL-10 loaded chitosan nanoparticles (IL10-CSNPs) could be used as a possible inhalable therapeutic tool for preventing exacerbations in asthmatic patients. As positive controls, we also assess whether interleukin 17A and interleukin 9 have the ability to stimulate human airway smooth muscle (HASM) cell contractility using magnetic twisting cytometry (MTC). Significant decreased baseline cell stiffness was observed in HASM cells pre-treated with IL-10, but not with IL10-CSNPs, whereas treatment with IL-17A significantly enhanced baseline cell stiffening. Our findings reveal a previously unknown mechanism underlying immunotherapy for prevention and treatment of asthma. / A quitosana é um polímero mucoadesivo biocompatível e biodegradável, com vantagens únicas, tais como a característica distinta de abrir as junções que permitim o transporte paracelular de antígenos e boa tolerabilidade. No entanto, sua baixa solubilidade em meios neutros ou alcalinizados tem restringido suas aplicações no campo farmacêutico. A quitosana pode ser facilmente carboximetilada para melhorar de sua solubilidade em meios aquosos, enquanto sua biodegradabilidade e biocompatibilidade são preservadas. Além disso, a carboximetilquitosana (CMCS) pode ser facilmente processada na forma de nanopartículas, o que destaca sua adequabilidade para uso extensivo no preparo de sistemas de delivery de medicamentos. O presente estudo trata do desenvolvimento e caracterização de um sistema de delivery baseado em nanopartículas de CMCS utilizando ovalbumina como proteína modelo. Nós demonstramos que as nanopartículas carregadas com ovalbumina foram sintetizadas com sucesso utilizando cloreto de cálcio como agente de reticulação por gelificação iônica. As nanopartículas exibiram um tamanho médio de aproximadamente 169 nm e apresentaram uma forma pseudo-esférica. O tamanho das nanopartículas aumentou de acordo com a adição de CaCl2 devido à forte atração eletrostática. Durante o armazenamento, o tamanho aumentado das nanopartículas foi atribuído a incorporação de água e agregação. A eficiência de encapsulamento da ovalbumina foi de aproximadamente 17%. A microscopia confocal mostrou claramente a associação entre ovalbumina e a cadeias de CMCS nas nanopartículas. Sugerimos, portanto, que tal sistema pode ser considerado como candidato atraente e promissor para o carreamento de proteínas e antígenos. O principal desafio que limita o uso desses carreadores consiste na instabilidade em meio aquoso. Assim, o próximo passo deste trabalho foi determinar a robustez de várias formulações utilizandose diferentes protocolos de liofilização. Este estudo demonstrou que o manitol em uma concentração de 10% (p/v) é adequado para preservar da agregação as nanocápsulas de CMCS carregadas com ovalbumina durante a liofilização e subsequente reconstituição. Mais importante, os resultados mostraram que uma etapa de annealing tem um enorme impacto sobre a porosidade da amostra liofilizada devido a quase completa cristalização do manitol, uma vez que a matriz cristalina evita o colapso parcial e a formação de poros maiores observados na ausência do annealing. Portanto, a observação comum de que o annealing aumenta o tamanho doporos devido ao crescimento dos cristais de gelo nem sempre se aplica, pelo menos quando a cristalização de um soluto está envolvida. Uma vez que todas as caracterizações e estudos de estabilidade foram realizados, o principal objetivo deste estudo foi desenvolver um sistema estável de delivery de antígeno para imunização oral utilizando CMCS e vírus rábico inativado (RV) como antígeno. Verificou-se que as nanopartículas carregadas com RV aumentam as respostas imune sistêmica (IgG) e local (IgA) contra o RV após administração oral em camundongos. As doses efetivas 50% foram 50 vezes maiores que os controles negativos, indicando que a resposta imune foi iniciada apenas após a terceira dose da vacina. Além disso, foram produzidos anticorpos neutralizantes suficientes para proteção contra os efeitos nocivos do vírus rábico. Conclui-se, portanto, que as nanopartículas de CMCS formuladas neste estudo, são adequadas para o delivery oral de vacinas, e podem ser sugeridas como um sistema promissor de delivery para uma gama diversa de antígenos, bem como para o delivery de genes/proteínas, especialmente para aqueles carregados positivamente. Uma vez que diversas abordagens mostram que uma intervenção efetiva em casos de inflamação alérgica de vias aéreas pode ser conseguida por meio de células secretoras de interleucina 10 (IL-10) mediante ativação por alergenos, a parte final deste trabalho esteve dedicada a avaliação de nanopartículas de quitosana carregadas com IL-10 (IL10-CSNPs) como possível ferramenta terapêutica inalável para prevenção de exacerbações em pacientes asmáticos. Como controles positivos, avaliou-se adicionalmente se as interleucinas 17A (IL-17A) e 9 (IL-9) possuem a capacidade de estimular a contratilidade de células humanas de músculo liso de vias aéreas humanas (HASM) por meio de citometria de torção magnética (MTC). Uma diminuição significativa da rigidez celular basal foi observada em células HASM pré-tratadas com IL-10, mas não com IL10-CSNPs, enquanto que o tratamento com IL-17A aumentou significativamente a magnitude rigidez celular basal. Nossos resultados revelam um mecanismo previamente desconhecido subjacente à imunoterapia para prevenção e tratamento da asma.

Une des principales causes d’échec dans le traitement des cancers est le développement de résistances aux drogues par les cellules tumorales. Les cellules souches cancéreuses (CSC) sont suspectées d’être responsables de ces rechutes, conduisant à la récurrence de la maladie et bien souvent au décès des patients. En clinique, il est donc nécessaire de développer des stratégies thérapeutiques capables de cibler ces CSC résistantes et aboutir à la guérison des patients. Les CSC sont régulées par un ensemble de signaux aussi bien biologiques que physiques au sein de la niche tumorale. Mon projet a pour objectif de déterminer l’implication du microenvironnement tumoral (voie de signalisation BMP et contraintes mécaniques) dans le maintien et la résistance des cellules souches leucémiques (CSLs) de la leucémie myéloïde chronique (LMC). Pour cela, nous avons combiné tests fonctionnels et moléculaires ainsi que l’analyse de la niche tumorale sur plus de 200 échantillons de patients atteints de LMC. Nous avons ainsi démontré que l’altération de la voie BMP intrinsèque aux cellules immatures de la LMC corrompt et amplifie la réponse à BMP2 et BMP4, présents en quantités anormalement abondantes au sein de la niche tumorale. Ces résultats récemment publiés dans Blood nous ont amenés à évaluer le rôle de la voie BMP dans le maintien des CSLs sous traitement par les ITK. La microscopie à force atomique nous a permis de démontrer que l’expression de BCR-ABL est suffisante pour induire une augmentation de la rigidité des cellules immatures de LMC par rapport à des cellules saines. Enfin, l’utilisation d’un système de confinement cellulaire nous a permis de démontrer que le stress mécanique contrôle la prolifération des cellules leucémiques immatures en régulant l’expression de gènes mécano-sensibles comme Twist-1. Ces résultats pourraient expliquer comment des CSLs tirent profit des contraintes mécaniques issues de leur microenvironnement afin d’acquérir un avantage prolifératif par rapport aux cellules saines. Ultimement, nous espérons que cette approche transdisciplinaire permettra d’identifier les molécules clés de la transduction de signaux mécaniques potentiellement impliqués dans le maintien et la résistance des CSC et ainsi proposer de nouvelles cibles pour contrer ces effets. / One of the main causes of treatment failure in cancers is the development of drug resistance by cancer cells. The persistence of cancer stem cells (CSCs) might explain cancer relapses as they could allow reactivation of cancer cells proliferation following therapy, leading to disease persistence and ultimately to patients’ death. Clinically, it is crucial to develop therapeutic strategies able to target resistant CSCs in order to cure the patients. CSCs are controlled by a variety of biochemical and biomechanical signals from the leukemic niche. My project aims to determine the involvement of the tumor microenvironment (BMP signaling pathway and mechanical stress) in the maintenance and resistance of Leukemic Stem Cells (LSCs) in Chronic Myelogenous Leukemia (CML). For this, we combined functional and molecular assays to the analysis of tumor microenvironment on more than 200 CML patients’ samples. We demonstrated that alterations of intracellular BMP signaling pathway in CP-CML primary samples corrupt and amplify the response to exogenous BMP2 and BMP4, which are abnormally abundant in the tumor microenvironment. These results, recently published in Blood led us to evaluate the role of the BMP pathway in LSC maintenance under TKI treatment. Atomic force microscopy allowed us to demonstrate that BCR-ABL expression alone is sufficient to increases the rigidity of immature CML cells compared to healthy ones. Finally, using a unique cell confining system, we were able to demonstrate that mechanical stress controls the proliferation of immature leukemic cells by regulating the expression of mechano-sensitive genes such as Twist-1. These results could explain how LSCs can benefit from a mechanical stress exerted by their microenvironment to acquire a proliferative advantage over normal cells. Ultimately, we hope that this transdisciplinary approach will help to identify key molecules in the transduction of mechanical signals potentially involved in maintenance and resistance of CSCs and thus offer new targets to counter these effects.