Small diameter vascular grafts comprised entirely from cells and cell-derived extracellular matrix (ECM) have shown promise in clinical trials and may have potential advantages as in vitro vascular tissue models. A challenge with current cell-derived tissue engineering approaches is the length of time required to generate strong, robust tissue. There is a lack of alternative methods to rapidly assemble cells into a 3D format without the support of a scaffold. Toward the goal of engineering a new approach to rapidly synthesizing vascular tissue constructs entirely from cells, we have developed and characterized a strategy for creating cell-derived tissue rings by cellular self-assembly. The focus of this thesis was to develop the system to rapidly generate engineered tissue rings, and to evaluate their structural and functional properties. To generate tissue rings, rat smooth muscle cells (SMCs) were seeded into round-bottomed, ring-shaped agarose wells with varying inner post diameters (2, 4, and 6 mm). Within 24 hours of seeding, cells aggregated, contracted, and formed robust tissue that could be removed from their wells and handled. If kept in culture, the thickness of these tissue rings increased with time. Mechanical analysis of the tissue showed that it was stronger after only 8 days in culture than engineered tissues generated by other approaches (such as seeding cells in biopolymer gels) cultured and tested at similar time points. Histological staining of the tissue rings revealed high cell densities throughout, along with the presence of glycosaminoglycans and some collagen. We also found that we could use the tissue rings as building blocks to generate larger tubular structures. Briefly, tissue rings were removed from the agarose wells and transferred onto silicone tubing mandrels. Once the rings were placed in contact with each other on the mandrel, they were cultured to allow the rings to fuse together. We found that the ability of tissue rings to fuse decreased with increasing ring “pre-culture� duration, and that we were able to generate fully fused tissue tubes in as little as 8 days (with only one day of ring pre-culture and seven days of fusion). In the last section of this thesis, we established the feasibility of using primary human SMCs to generate self-assembled tissue rings, similar to the self-assembled rings generated with rat SMCs. Compared to the rat SMC rings, human SMC rings were stronger, stiffer and appeared to contain increased levels of collagen. These data showed that human SMCs are capable of self-assembling into tissue rings similar to rat SMCs, and may therefore be used to create engineered human vascular tissue. Overall, we have developed a platform technology that can be used to screen the effects of culture parameters on the structure, mechanics, and function of vascular tissue. We anticipate that through the use of this technology, we can further improve vascular grafts by better understanding factors which promote ECM synthesis and SMC contraction. We can use these results directly toward the generation of vascular grafts by fusing self-assembled cell rings together to form tissue tubes. These novel bioengineered vascular tissues may also serve as a method to produce in vitro models to help further our understanding of vascular diseases, as well as facilitate pre-clinical screening of vascular tissue responses to pharmacologic therapies.

No description available.

Multi electrode array (MEA) systems have evolved from custom-made experimental tools, exploited for neural research, into commercially available systems that are used throughout non-invasive electrophysiological study. MEA systems are used in conjunction with cells and tissues from a number of differing organisms (e.g. mice, monkeys, chickens, plants). The development of MEA systems has been incremental over the past 30 years due to constantly changing specific bioscientific requirements in research. As the application of MEA systems continues to diversify contemporary commercial systems are requiring increased levels of sophistication and greater throughput capabilities.

"Recent data show that 7.6 million Americans have survived a myocardial infarction (MI), and 5.1 million Americans suffer from severe heart failure. Stem cell therapy has the potential to improve cardiac function after MI. Two promising cells for cardiovascular regeneration therapies include human mesenchymal stem cells (hMSCs) and pluripotent stem cell derived cardiomyocytes (hPS-CM) each with their own unique method for improving cardiac function post-infarct. However, a limiting factor to cell therapies is that the methods currently used to deliver cells to the myocardium, including intramyocardial injection (considered the gold standard), suffer from low retention rates. To promote localization of delivered cells to the infarct and increase retention rates, our lab has developed a fibrin biological suture that can deliver human mesenchymal stem cells (hMSCs) with an efficiency of 64% compared to just 11% with intramyocardial injection in the normal rat heart. In this dissertation we sought to examine the functionality of hMSC and hPS-CM seeded sutures and their impact on cardiovascular regeneration applications. We began by delivering hMSC seeded fibrin sutures to an infarcted rat heart and found that the sutures are an effective method to deliver cells to the infarcted myocardium and demonstrated a trend towards improved regional mechanical function in the infarct region over infarct alone. Next, we transitioned to using hPS-CM and developed methods to seed the sutures, as well as a method to measure hPS-CM contractility with high spatial and temporal resolution, while concurrently capturing calcium transients. This technique allowed us to examine the contractile behavior in terms of contractile strain and conduction velocity of hPS-CM seeded on fibrin microthreads over 21 days in culture. We found that the fibrin microthread is a suitable scaffold for hPS-CM attachment and contraction and that extended culture promotes cell alignment along the length of the suture as well as improvements in contractile function in terms of increases in contractile strain and conduction velocity. Finally, we delivered the hPS-CM seeded microthreads to an uninjured rat heart and found a delivery efficiency of 67%. Overall, we further demonstrated the technology of the fibrin suture to deliver cells to an infarct as well as the ability to support the attachment, contraction and delivery of hPS-CM to cardiac tissue. "

Every year, 400,000 coronary artery bypasses (CABG) are performed in the United States. However, one third of all patients who need a CABG cannot undergo the procedure because of the lack of suitable autologous blood vessels. Both synthetic and tissue engineered vascular grafts have been used clinically for vascular grafts or other surgical applications, but no small- diameter engineered vessels have yet been successfully used for CABG. The success of vascular tissue engineering is strongly dependent on being able to control tissue contractility and extracellular matrix (ECM) production to achieve balance between tissue strength and physiological function. Smooth muscle cells (SMCs), the main contributor of contractility in blood vessels, retain phenotypic plasticity, meaning they possess the ability to switch between a contractile and synthetic phenotype. In 2D culture, a number of biochemical and mechanical cues have been shown to promote the switch to a contractile phenotype in SMCs. However, achieving a stable contractile phenotype in 3D tissue has proven difficult. The work in this dissertation describes an investigation of how passive and dynamic environmental cues influence the smooth muscle phenotype. We studied the effects of substrate modulus in conjunction with changes in cell culture media composition on SMC phenotype in 2D and 3D cultures. Culturing SMCs in a low-serum culture medium resulted in an increase in SMC contractility in 2D cell culture but not in 3D cell-derived tissue. We found that, in SMCs cultured on soft substrates, the ability to modulate SMC phenotype in response to changes in media was diminished. Passively crosslinking the ECM of our cell-derived tissues with genipin resulted in modest increases in elastic modulus, though not enough to observe changes in SMC phenotype. Additionally, we investigated how dynamic cyclic mechanical stretch, in conjunction with cell culture medium, modified SMC contractility in cell and tissue cultures. SMCs increased contractile protein expression when exposed to dynamic stretch in 2D culture, even on soft substrates, which have previously been shown to inhibit phenotypic modulation. In 3D tissue rings, after mechanical stimulation, SMCs became more aligned, the tissue became tougher, and SMCs exhibited a measurable increase in contractile protein expression. In summary, we found that increasing substrate modulus, culturing in low serum cell culture medium, and imparting cyclic mechanical stretch can promote SMC differentiation and cellular alignment, and improve tissue mechanical properties. This information can be used to more accurately recapitulate vascular tissue for use in modeling or in the creation of tissue engineered blood vessels.

This study analyzed sex differences in methylphenidate (MPH) sensitization and corresponding changes in glial cell-derived neurotrophic factor (GDNF) and brain-derived neurotprhic factor protein (BDNF) in adolescent male and female rats. After habituation to a locomotor arena, animals were sensitized to MPH (5mg/kg) or saline from postnatal day (P) 33–49, tested every second day. On P50, one group of animals were injected with saline and behavior assessed for conditioned hyperactivity. Brain tissue was harvested on P51 and analyzed for GDNF protein. A second group of animals was also sensitized to MPH from P33 to 49, and expression of behavioral sensitization was analyzed on a challenge given at P60, and BDNF protein analyzed at P61. Females demonstrated more robust sensitization to MPH than males, but only females given MPH during sensitization demonstrated conditioned hyperactivity. Interestingly, MPH resulted in a significant increase in striatal and accumbal GDNF with no sex differences revealed. Results of the challenge revealed that females sensitized and challenged with MPH demonstrated increased activity compared to all other groups. Regarding BDNF, only males given MPH demonstrated an increase in dorsal striatum, whereas MPH increased accumbal BDNF with no sex differences revealed. A hierarchical regression analysis revealed that behavioral sensitization and the conditioned hyperactivity test were reliable predictors of striatal and accumbal GDNF, whereas sensitization and activity on the challenge were reliable predictors of accumbal BDNF, but had no relationship to striatal BDNF. These data have implications for the role of MPH in addiction and dopamine system plasticity.

The fabrication of biomimetic heart muscle suitable for pharmaceutical compound evaluation and disease modeling is hindered by limitations in our understanding of how to guide and assess the maturity of engineered myocardium in vitro. We hypothesized that tissue architecture serves as an important cue for directing the maturation of engineered heart tissues and that reliable assessment of maturity could be performed using a multi-parametric rubric utilizing cardiomyocytes of known developmental state as a basis for comparison. Physical micro-environmental cues are recognized to play a fundamental role in normal heart development, therefore we used micro-patterned extracellular matrix to direct isolated cardiac myocytes to self-assemble into anisotropic sheets reminiscent of the architecture observed in the laminar musculature of the heart. Comparison of global sarcomere alignment, gene expression, and contractile stress in engineered anisotropic myocardium to isotropic monolayers, as well as, adult ventricular tissue revealed that anisotropic engineered myocardium more closely matched the characteristics of adult ventricular tissue, than isotropic cultures of randomly organized cardiomyocytes. These findings support the notion that tissue architecture is an important cue for building mature engineered myocardium. Next, we sought to develop a quality assessment strategy that utilizes a core set of 64 experimental measurements representative of 4 major categories (i.e. gene expression, myofibril structure, electrical activity, and contractility) to provide a numeric score of how closely stem cell-derived cardiac myocytes match the physiological characteristics of mature, post-natal cardiomyocytes. The efficacy of this rubric was assessed by comparing anisotropic engineered tissues fabricated from commercially-available murine ES- (mES) and iPS- (miPS) derived myocytes against neonatal mouse ventricular myocytes. The quality index scores calculated for these cells revealed that the miPS-derived myocytes more closely resembled the neonate ventricular myocytes than the mES-derived myocytes. Taken together, the results of these studies provide valuable insight into the fabrication and validation of engineered myocardium that faithfully recapitulate the characteristics of mature ventricular myocardium found in vivo. These engineered tissue design and quality validation strategies may prove useful in developing heart muscle analogs from human stem cell-derived myocytes that more accurately predict patient response than currently used animal models. / Engineering and Applied Sciences

Studies to gain mechanistic understanding of heart dysfunction based on animal and traditional cell culture models have significant limitations. Animal models are low throughput and fail to recapitulate many aspects of human cardiac biology, and 2D culture models utilizing human induced pluripotent stem cell derived cardiomyocytes (iPSC-CMs) are higher throughput but fail to incorporate one or more in vivo parameters, such as 3D architecture, electrical pacing and mechanical constraint. High throughput 3D tissue platforms could better recapitulate the in vivo microenvironment of cardiac tissue. Previous work from our group demonstrated an approach to build 3D cardiac microtissues based on photolithography-based fabrication of a MEMS device, but design limitations prevented further iterations. In this work, we used a 3D printing approach to engineer iPSC-CM-derived cardiac microtissues with different form factors. Microtissues generated in this platform increased in lifespan compared to the first-generation platform by more than 100%. When modeling mutations associated with genetic cardiomyopathy, functional and structural differences were observed between tissues composed of wild-type and mutant iPSC-CMs. These findings suggest that this micro-device platform can be potentially used for both mechanistic and drug discovery studies. / 2020-07-02T00:00:00Z

Cell-derived (CDM) matrix scaffolds provide a 3-dimensional (3D) matrix material that recapitulates a native, human extracellular matrix (ECM) microenvironment. CDMs are a heterogeneous source of ECM proteins with a composition dependent on the cell source and its phenotype. CDMs have several applications, such as for development of cell culture substrates to study stromal cell propagation and differentiation, as well as cell or drug delivery vehicles, or for regenerative biomaterial applications. Although CDMs are versatile and exhibit advantageous structure and activity, their use has been hindered due to the prolonged culture time required for ECM deposition and maturation in vitro. Macromolecular crowding (MMC) has been shown to increase ECM deposition and organization by limiting the diffusion of ECM precursor proteins and allowing the accumulation of matrix at the cell layer. A commonly used crowder that has been shown to increase ECM deposition in vitro is Ficoll, and was used in this study as a positive control to assess matrix deposition. Hyaluronic acid (HA), a natural crowding macromolecule expressed at high levels during fetal development, has been shown to play a role in ECM production, organization, and assembly in vivo. HA has not been investigated as a crowding molecule for matrix deposition or development of CDMs in vitro. This dissertation focused on 2 aims supporting the development of a functional, human dermal fibroblast-derived ECM material for the delivery deliver an antimicrobial peptide, cCBD-LL37, and for potentially promoting a pro-angiogenic environment. The goal of this thesis was to evaluate the effects of high molecular weight (HMW) HA as a macromolecular crowding agent on in vitro deposition of ECM proteins important for tissue regeneration and angiogenesis. A pilot proteomics study supported the use of HA as a crowder, as it preliminarily showed increases in ECM proteins and increased retention of ECM precursor proteins at the cell layer; thus supporting the use of HA as a crowder molecule. In the presence of HA, human dermal fibroblasts demonstrated an increase in ECM deposition comparable to the effects of Ficoll 70/400 at day 3 using Raman microspectroscopy. It was hypothesized that HA promotes matrix deposition through changes on ECM gene expression. However, qRT-PCR results indicate that HA and Ficoll 70/400 did not have a direct effect on collagen gene expression, but differences in matrix crosslinking and proteinase genes were observed. Decellularized CDMs were then used to assess CDM stiffness and endothelial sprouting, which indicated differences in structural organization of collagen, and preliminarily suggests that there are differences in endothelial cell migration depending on the crowder agent used in culture. Finally, the collagen retained in the decellularized CDM matrix prepared under MMC supported the binding of cCBD-LL37 with retention of antimicrobial activity when tested against E.coli. Overall, the differences in matrix deposition profiles in HA versus Ficoll crowded cultures may be attributed to crowder molecule-mediated differences in matrix crosslinking, turnover, and organization as indicated by differences in collagen deposition, matrix metalloproteinase expression, and matrix stiffness. MMC is a valuable tool for increasing matrix deposition, and can be combined with other techniques, such as low oxygen and bioreactor cultures, to promote development of a biomanufactured CDM-ECM biomaterial. Successful development of scalable CDM materials that stimulate angiogenesis and support antimicrobial peptide delivery would fill an important unmet need in the treatment of non-healing, chronic, infected wounds.

No description available.