In golf, a range of shot types are necessary for successful performance, with driving and iron-play constituting the long-game. It is possible to vary long-game shots through altered trajectory, for example, by utilising right-to-left or left-to-right ball flight curvature, providing course management advantages. However, how golfers vary their biomechanics to achieve different trajectories is not scientifically understood. Therefore, the purpose of this thesis was to biomechanically investigate different trajectories hit with the same club. To investigate shot trajectories, accurate measures of performance were necessary. Launch monitors (TrackMan Pro IIIe and Foresight GC2+HMT) are bespoke technologies capable of tracking the clubhead and ball through impact. However, their accuracy for scientific research has not been independently validated. Therefore, a novel purpose-designed tracking method was developed using a three-dimensional optical tracking system (GOM). The accuracy of this method was validated and the system used as the benchmark to which the two launch monitors were compared through limits of agreement. The results showed, in general, the launch monitors were in closer agreement to the benchmark for ball parameters than clubhead. High levels of agreement were found for ball velocity, ball path, total spin rate and backspin. However, poorer agreement was shown for ball sidespin and spin axis as well as clubhead velocity, clubhead path and clubhead orientation. Consequently, the launch monitors were deemed unsuitable for inclusion in scientific research across a range of impact parameters. Draw and fade trajectories with a driver and draw, fade and low trajectories with a 5-iron were investigated biomechanically. The clubhead and ball were tracked using the optical method developed in this thesis. Key biomechanical variables (address position and whole-swing) were defined based on coaching theory. Statistically, analysis of variance (address) and principal components analysis (whole-swing), were used to compare draw against fade and low against natural trajectories. Multivariate correlation was used to identify swing pattern similarities between golfers. The group-level comparison showed draw-fade address differences whereby for draw trajectories, the ball was positioned further away from the target, the lead hand further towards the target and the pelvis, thorax and stance openness closed relative to the target line. Over the whole-swing, the draw when compared to the fade demonstrated a pelvis rotation, more rotated away from the target with later rotation; lumbar forward flexion, with slower extending in the downswing; lumbar lateral flexion, with more flexion towards the trail throughout and prolonged trail flexing through ball contact; thorax lateral flexion, with greater, slower lead flexing in the backswing and greater, more prolonged trail flexing in the downswing; pelvis translation further towards the target throughout, with earlier forward translation and centre of pressure, with an earlier, quicker, greater forward shift. Cluster differences were evident, with both Clusters I (57% of golfers with the driver) and II (71% of golfers with the 5-iron) showing greater, earlier thorax rotation towards the target and a tendency for greater lumbar forward flexion over the whole-swing (Cluster II) and backswing (Cluster I). For the group-level low-natural comparison, golfers positioned the ball further away from the target and their lead hand further towards the target for low trajectories. Further, Cluster IV (45% of golfers), narrowed their stance width and laterally flexed their thorax towards the lead, for the same trajectories. Over the whole-swing, the low when compared to the natural showed the pelvis translated towards the target throughout, with later, lesser forward shift for the low trajectories. Furthermore, centre of pressure displayed a greater forward shift for the same shots. Finally, both clusters (Cluster III 36% of golfers and Cluster IV) differed in lumbar forward flexion when playing low trajectories; over the backswing, Cluster III extended, whereas Cluster IV flexed. Cluster IV also showed greater extending in the downswing. Finally, Cluster IV showed more lumbar lateral flexion towards the lead throughout. The results of this study have implications for scientific researchers as well as golf coaches, club-fitters and professionals. Commercially available launch monitors appear accurate enough for coaching applications, however caution is needed for scientific research when tracking a range of clubhead and ball parameters. Furthermore, changes in biomechanics when playing different trajectories has implications for future research and interpretation of published work, as well as for coaching theory. Future work following this thesis could utilise the optical tracking method to validate further commercial systems and for more detailed experimental investigation of clubhead-ball impacts. Furthermore, additional biomechanical investigation into a wider range of shot trajectories across more variables could be conducted, with a more in-depth understanding gained from principal components analysis and golfer clustering.

abstract: During the downswing all golfers must roll their forearms and twist the club handle in order to square the club face into impact. Anecdotally some instructors say that rapidly twisting the handle and quickly closing the club face is the best technique while others disagree and suggest the opposite. World class golfers have swings with a range of club handle twist velocities (HTV) from very slow to very fast and either method appears to create a successful swing. The purpose of this research was to discover the relationship between HTV at impact and selected body and club biomechanical characteristics during a driver swing. Three-dimensional motion analysis methods were used to capture the swings of 94 tour professionals. Pearson product-moment correlation was used to determine if a correlation existed between HTV and selected biomechanical characteristics. The total group was also divided into two sub-groups of 32, one group with the fastest HTV (Hi-HTV) and the other with the slowest HTV (Lo-HTV). Single factor ANOVAs were completed for HTV and each selected biomechanical parameter. No significant differences were found between the Hi-HTV and Lo-HTV groups for both clubhead speed and driving accuracy. Lead forearm supination velocity at impact was found to be significantly different between groups with the Hi-HTV group having a higher velocity. Lead wrist extension velocity at impact, while not being significantly different between groups was found to be positive in both groups, meaning that the lead wrist is extending at impact. Lead wrist ulnar deviation, lead wrist release and trail elbow extension velocities at maximum were not significantly different between groups. Pelvis rotation, thorax rotation, pelvis side bend and pelvis rotation at impact were all significantly different between groups, with the Lo-HTV group being more side bent tor the trail side and more open at impact. These results suggest that world class golfers can successfully use either the low or high HTV technique for a successful swing. From an instructional perspective it is important to be aware of the body posture and wrist/forearm motion differences between the two techniques so as to be consistent when teaching either method. / Dissertation/Thesis / Doctoral Dissertation Exercise Science 2014

ABSTRACT: The use of multi-segment trunk models to investigate the crunch factor in golf may be warranted. The first aim of the study was to investigate the relationship between the trunk and lower trunk for crunch factor-related variables (trunk lateral bending and trunk axial rotation velocity). The second aim was to determine the level of association between crunch factor-related variables with swing (clubhead velocity) and launch (launch angle). Thirty-five high-level amateur male golfers (Mean ± SD: age = 23.8 ± 2.1 years, registered golfing handicap = 5 ± 1.9) without low back pain had kinematic data collected from their golf swing using a 10-camera motion analysis system operating at 500 Hz. Clubhead velocity and launch angle were collected using a validated real-time launch monitor. A positive relationship was found between the trunk and lower trunk for axial rotation velocity (r(35) = .47, P < .01). Cross-correlation analysis revealed a strong coupling relationship for the crunch factor (R2 = 0.98) between the trunk and lower trunk. Using generalised linear model analysis, it was evident that faster clubhead velocities and lower launch angles of the golf ball were related to reduced lateral bending of the lower trunk.

In competitive golf, the player’s ability to hit the ball a long distance affects the score in a positive way. Swing kinematics is considered an important factor in driver performance; one way of improving swing kinematics is through strength and power training. Subsequently, high-level golfers and their coaches often explore novel ways of increasing the distance of a shot, in particular driver carry distance (CD). This licentiate thesis presents two studies with the overall aim of studying how swing kinematic and physical characteristics are associated with driver performance among intercollegiate golf players. The studies report swing kinematics associated with driver performance (study 1) and the impact of isokinetic rotational training on driver performance and swing kinematic variables (study 2). The methods used were (1) a cross-sectional correlation study (n=15) and (2) an open trial intervention study (n=20). The studies investigated (1) the relationship between golf swing kinematics and driver performance, and (2) the impact of strength training on swing kinematics and driver performance variable. The results show variables that were distinctive for the club head speed (CHS) were mainly during the downswing: greater X-factor stretch; and higher pelvis peak speed. Whilst, factors distinctive to the regression model for CD were mainly at impact: reduced thorax rotation; and greater thorax lateral bend. Nine weeks of isokinetic training increased seated rotational force and power, peak arm speed and arm acceleration, ball speed, and CD more compared to isotonic training. Even though isokinetic training did not increase CHS, it did result in greater CD. This licentiate thesis contributes to the understanding of which variables influence driver performance, in particular CD, among high-level golfers. Segmental interactions (pelvis-thorax), lead arm speed and acceleration, isokinetic and isotonic training. These results may guide training interventions aiming to improve driver and golf performance among high-level golfers, particularly those with a background of strength training. Future studies could investigate how the interaction between swing kinematics, clubhead trajectory, and driver performance variables differ between male and female golfers.