A power system is typically one small part of a larger interconnected network and is affected to a varying degree, by contingencies external to itself as well as by the reaction of external network to its own contingencies. Thus, the accuracy of a complete interconnected network model would affect the results of many transmission level analyses. In an interconnected power system, the real-time network security and power transfer capability analyses require a ¡§real-time¡¨ complete network base case solution. In order to accurately assess the system security and the inter-area transfer capability, it is highly desirable that any available information from all areas is used. With the advent of communications among operations control center computers, real-time telemetered data can be exchanged for complete network modeling. Measurement time skew should be considered in the complete network modeling when combining large area data received via a data communication network. In this dissertation, several suggestions aiming toward the improvement of complete network modeling are offered. A discrete event simulation technique is used to assess the performance of a data exchange scheme that uses Internet interface to the SCADA system. Performance modeling of data exchange on the Internet is established and a quantitative analysis of the data exchange delay is presented. With the prediction mechanisms, the effect of time skew of interchanged data among utilities can be minimized, and consequently, state estimation (SE) could provide the accurate real-time complete network models of the interconnected network for security and available transfer capability analyses. In order to accommodate the effects of randomly varying arrival of measurement data and setup a base case for more accurate analyses of network security and transfer capability, an implementation of a stochastic Extended Kalman Filter (EKF) algorithm is proposed to provide optimal estimates of interconnected network states for systems in which some or all measurements are delayed. To have an accurate state estimation of a complete network, it is essential to have the capability of detecting bad data in the model. An efficient information debugging methodology based on the stochastic EKF algorithm is used for the detection, diagnosis and elimination of bad data.

This work is motivated by several modern applications involving social networks, crowds, and markets. Our work focuses on the theme of designing effective incentive strategies for these applications. Viral marketing is receiving much attention by practicing marketers and researchers alike. While not a new idea, it has come to the forefront because of multiple effects – products have become more complex, making buyers to increasingly rely on opinions of their peers; consumers have evolved to distrust advertising; and Web2.0 has revolutionized the way people can connect, communicate and share. With power shifting to consumers, it has become important for companies to devise effective viral marketing strategies. Incentives are also a critical aspect of crowd sourcing tasks and play a crucial role in attracting, motivating and sustaining participation. The thesis addresses the following problems. (i) Optimal Control of Information Epidemics: We address two problems concerning information propagation in a population: a) how to maximize the spread of a given message in the population within the stipulated time and b) how to create a given level of buzz- measured by the fraction of the population engaged in conversation on a topic of interest- at a specified time horizon. (ii) Optimal Control Strategies for Social Influence (SI) Marketing: We investigate four SI strategies, namely, recommendation programs, referral programs, consumer reviews and campaigns on on-line forums. The campaign is assumed to be of finite duration, and the objective is to maximize profit, the (un-discounted) revenue minus the expenditure on the SI strategy under consideration, over the campaign duration. For each SI strategy, we focus on its timing, i.e., determining at what times to execute it. We address two important questions pertaining to them: a) how to execute a given SI strategy optimally? and b) having executed it so, what gains does it lead to? (iii) Optimal Mix of Incentive Strategies on Social Networks: The reach of a product in a pop- ulation can be influenced by offering (a) direct incentives to influence the buying behavior of potential buyers and (b) referral rewards to exploit the impact of social influence in inducing a purchasing decision. The company is interested in an optimal mix of these incentive programs. We report results on structure of optimal strategies for the company with significant practical implications. (iv) Truthful Tractable Mechanisms with Applications to Crowd sourcing: We focus on crowd- sourcing applications that involve specialized tasks for which the planner hardly has any idea about crowdworkers’ costs, for example, tagging geographical regions with air pollution levels or severity level of Ebola like disease. The mechanisms have to be robust to untruthful bidding from the crowdworkers. In our work, we propose tractable allocation algorithms that are monotone, leading to design of truthful mechanisms that can be successfully deployed in such applications.

With the increase in bandwidth, more widespread distribution of media, and increased capability of mobile devices, multimedia streaming has not only become feasible, but more economical in terms of space occupied by the media file and the costs involved in attaining it. Although much attention has been paid to peer to peer media streaming over the Internet using HTTP and RTSP, little research has focussed on the use of the Bluetooth protocol for streaming audio and video between mobile devices. This project investigates the feasibility of Bluetooth as a protocol for audio and video streaming between mobile phones using the J2ME platform, through the analysis of Bluetooth protocols, media formats, optimum packet sizes, and the effects of distance on transfer speed. A comparison was made between RFCOMM and L2CAP to determine which protocol could support the fastest transfer speed between two mobile devices. The L2CAP protocol proved to be the most suitable, providing average transfer rates of 136.17 KBps. Using this protocol a second experiment was undertaken to determine the most suitable media format for streaming in terms of: file size, bandwidth usage, quality, and ease of implementation. Out of the eight media formats investigated, the MP3 format provided the smallest file size, smallest bandwidth usage, best quality and highest ease of implementation. Another experiment was conducted to determine the optimum packet size for transfer between devices. A tradeoff was found between packet size and the quality of the sound file, with highest transfer rates being recorded with the MTU size of 668 bytes (136.58 KBps). The class of Bluetooth transmitter typically used in mobile devices (class 2) is considered a weak signal and is adversely affected by distance. As such, the final investigation that was undertaken was aimed at determining the effects of distance on audio streaming and playback. As can be expected, when devices were situated close to each other, the transfer speeds obtained were higher than when devices were far apart. Readings were taken at varying distances (1-15 metres), with erratic transfer speeds observed from 7 metres onwards. This research showed that audio streaming on the J2ME platform is feasible, however using the currently available class of Bluetooth transmitter, video streaming is not feasible. Video files were only playable once the entire media file had been transferred.

This thesis presents an investigation of how to extend the reach of a Bluetooth personal area network by introducing the concept of Bluetooth Hotspots. Currently two Bluetooth devices cannot communicate with each other unless they are within radio range, since Bluetooth is designed as a cable-replacement technology for wireless communications over short ranges. An investigation was done into the feasibility of creating Bluetooth hotspots that allow distant Bluetooth devices to communicate with each other by transporting their communications between these hotspots via an alternative network infrastructure such as an IP network. Two approaches were investigated, masquerading of remote devices by the local hotspot to allow seamless communications and proxying services on remote devices by providing them on a local hotspot using a distributed service discovery database. The latter approach was used to develop applications capable of transporting Bluetooth’s RFCOMM and L2CAP protocols. Quantitative tests were performed to establish the throughput performance and latency of these transport applications. Furthermore, a number of selected Bluetooth services were tested which lead us to conclude that most data-based protocols can be transported by the system.

abstract: Newer communication technologies (CTs) will always vie with more mature technologies for the attention of time-constrained legislators. As continual advances in CT make new methods of communication available to legislators, it is important to understand how newly introduced CTs influence novel and changing legislator behaviors. The mixed-method research presented in this study provides deep insights into the relationships between legislators and the CTs they use. This study offers many contributions, among them: it effectively bridges a gap between existing Internet Enabled CT (IECT) behavioral studies on non-legislators by expanding them to include legislator behavior; it expands existing narrowly focused research into the use of CT by legislators by including both IECT and mature CTs such as face-to-face meetings and telephone; it provides a fresh perspective on the factors that make CTs important to legislators, and it uncovers legislator behaviors that are both useful, and potentially harmful, to the process of democracy in the United States. In addition, this study confirms and extends existing research in areas such as minority party constituent communication frequency, and extends the topic of legislator CT behavior into some unanticipated areas such as constituent selective behaviors and the use of text messaging during floor debates which effectively enable lobbyists and paid consultants to participate real-time in floor debates in the Arizona House and Senate. / Dissertation/Thesis / Ph.D. Public Policy 2014

S rostoucím počtem řídicích systémů a jejich distribuovanosti získávájí komunikační sítě na důležitosti a objevují se nové výzkumné trendy. Hlavní problematikou v této oblasti, narozdíl od dřívějších řídicích systémů využívajících dedikovaných komunikačních obvodů, je časově proměnné zpoždění měřicích a řídicích signálů způsobené paketově orientovanými komunikačními prostředky, jako např. Ethernet. Aspekty komunikace v reálném čase byly v těchto sítích již úspěšně vyřešeny. Nicméně, analýzy trendů trhu předpovídají budoucí využití také IP sítí v průmyslové komunikaci pro časově kritickou procesní vyměnu dat. IP komunikace má ovšem pouze omezenou podporu v instrumentaci pro průmyslovou automatizace. Tato výzva byla nedávno technicky vyřešena v rámci projektu Virtual Automation Networks (virtuální automatizační sítě - VAN) zapojením mechanismů kvality služeb (QoS), které jsou schopny zajistit měkkou úroveň komunikace v reálném čase. Předložená dizertační práce se zaměřuje na aspekty výkonnosti reálného času z analytického hlediska a nabízí prostředek pro hodnocení využitelnosti IP komunikace pro budoucí průmyslové aplikace. Hlavním cílem této dizertační práce je vytvoření vhodného modelovacího rámce založeného na network calculus, který pomůže provést worst-case výkonnostní analýzu časového chování IP komunikačních sítí a jejich prvků určených pro budoucí použití v průmyslové automatizaci. V práci byla použita empirická analýza pro určení dominantních faktorů ovlivňujících časového chování síťových zařízení a identifikaci parametrů modelů těchto zařízení. Empirická analýza využívá nástroj TestQoS vyvinutý pro tyto účely. Byla navržena drobná rozšíření rámce network calculus, která byla nutná pro modelování časového chování používaných zařízení. Bylo vytvořeno několik typových modelů zařízení jako výsledek klasifikace různých architektur síťových zařízení a empiricky zjištěných dominantních faktorů. U modelovaných zařízení byla využita nová metoda identifikace parametrů. Práce je zakončena validací časových modelů dvou síťových zařízení (přepínače a směrovače) oproti empirickým pozorováním.

Die Idee einer mobilen Verwaltung1 entspringt der Kombination von drei derzeit wirkenden Entwicklungslinien. Als erstes zu nennen ist das Electronic Government, das aufbauend auf der Einführung der elektronischen Datenverarbeitung nun zu einer umfassenden Vernetzung der Verwaltung führt.

In recent years, neural networks have seen increased interest from both the cognitive computing and computation neuroscience fields. Neuromorphic computing systems simulate neural network efficiently, but have not yet reached the amount of neurons that a mammal has. Increasing this quantity is an aspiration, but more neurons will also increase the traffic load of the system. The placement of the neurons onto the neuromorphic computing system has a significant effect on the network load. This thesis introduces algorithms for placing a large amount of neurons in an efficient and agile way. First, an analysis of placement algorithms for very large scale integration design is done, displaying that computing complexity of these algorithms is high. When using the predefined underlying structure of the neural network, more rapid algorithms can be used. The results show that the population placement algorithm has high computing speed as well as providing exceptional result.

Multiple Sequence Alignment (MSA) is a fundamental analysis method used in bioinformatics and many comparative genomic applications. The time to compute an optimal MSA grows exponentially with respect to the number of sequences. Consequently, producing timely results on large problems requires more efficient algorithms and the use of parallel computing resources. Reconfigurable computing hardware provides one approach to the acceleration of biological sequence alignment. Other acceleration methods typically encounter scaling problems that arise from the overhead of inter-process communication and from the lack of parallelism. Reconfigurable computing allows a greater scale of parallelism with many custom processing elements that have a low-overhead interconnect. The proposed parallel algorithms and architecture accelerate the most computationally demanding portions of MSA. An overall speedup of up to 150 has been demonstrated on a large data set when compared to a single processor. The reduced runtime for MSA allows researchers to solve the larger problems that confront biologists today.

Made available in DSpace on 2014-12-17T14:56:09Z (GMT). No. of bitstreams: 1 DanielGC.pdf: 538651 bytes, checksum: 34bfc134a2af9166b846b044a2968b16 (MD5) Previous issue date: 2006-05-25 / New versions of SCTP protocol allow the implementation of handover procedures in the transport layer, as well as the supply of a partially reliable communication service. A communication architecture is proposed herein, integrating SCTP with the session initiation protocol, SIP, besides additional protocols. This architecture is intended to handle voice applications over IP networks with mobility requirements. User localization procedures are specified in the application layer as well, using SIP, as an alternative mean to the mechanisms used by traditional protocols, that support mobility in the network layer. The SDL formal specification language is used to specify the operation of a control module, which coordinates the operation of the system component protocols. This formal specification is intended to prevent ambiguities and inconsistencies in the definition of this module, assisting in the correct implementation of the elements of this architecture / Novas vers?es do protocolo SCTP permitem sua utiliza??o para implementa??o de mecanismos de handover em n?vel de transporte, bem como o fornecimento de um servi?o de transmiss?o de dados parcialmente confi?vel. Integrando o SCTP com o protocolo de inicia??o de sess?es, SIP, al?m de utilizar adicionalmente servi?os de outros protocolos auxiliares, uma arquitetura de comunica??o p?de ser proposta, a fim de atender ?s aplica??es de voz sobre IP com requisitos de mobilidade. S?o especificados ainda os procedimentos de localiza??o de usu?rio em n?vel de aplica??o, utilizando o protocolo SIP, como alternativa aos mecanismos empregados por protocolos tradicionais que suportam mobilidade na camada de rede. A linguagem de especifica??o formal SDL ? utilizada para especificar o funcionamento de um M?dulo de Controle, relacionado ? opera??o coordenada dos protocolos que comp?e a arquitetura. Pretende-se assim evitar ambig?idades e inconsist?ncias na defini??o desse m?dulo, o que pode auxiliar em implementa??es corretas de elementos dessa arquitetura