1 |
Tensile strength of asphalt binder and influence of chemical composition on binder rheology and strengthSultana, Sharmin 15 September 2015 (has links)
Asphalt mixtures or asphalt concrete are used to pave about 93% of about 2.6 million miles paved roads and highways in the US. Asphalt concrete is a composite of aggregates and asphalt binder; asphalt binder works as a glue to bind the aggregate particles. The mechanical response of the asphalt binder is dependent on the time/rate of loading, temperature and age. An asphalt concrete mixture inherits most of these characteristics from the asphalt binder. Also the asphalt binder plays a critical role in providing the asphalt concrete the ability to resist tensile stresses and relaxing thermally induced stresses that can lead to fatigue and low temperature cracking, respectively. Hence, it is very important (but not sufficient) to ensure that asphalt binders used in the production of asphalt concrete are inherently resistant to cracking, rutting and other distresses that a pavement may undergo. Current binder specification (AASHTO M-320) to evaluate its fatigue cracking is based on the stiffness of the binder and not on its tensile strength. Also, measurements following current specifications are made on test specimens subjected to a uniaxial mode of loading that does not produce the same stress state in the binder as in the case of asphalt concrete.
Another challenge in being able to produce binders with inherently superior performing characteristics is the fact that the asphalt binders produced in a refinery do not have a consistent chemical composition. The chemical composition of asphalt binder depends on the source and refining process of crude oil. There is a need to better quantify the tensile strength of asphalt binder and understand the relationship between the chemical composition of asphalt binders and its mechanical properties. The knowledge from this study can be used to engineer asphalt binders that have superior performance characteristics.
The objective of this research was to quantify the tensile strength of asphalt binder, develop a metric for the tensile strength and identify the relationship between chemical composition and mechanical properties of asphalt binder. Laboratory tests were performed on binders of different grades using a poker chip geometry to simulate confined state by varying the film thickness, rate of loading and modes of loading. The chemical properties of asphalt binder were studied based on SARA fractionation. The findings from this research showed that the modified correspondence principles can unify and explain the rate and mode dependency of asphalt binder. This study also quantified the relationship between chemical composition, and rheological and mechanical properties of asphalt binder. Finally, a composite model was developed based on the individual properties of chemical fractions which could predict the dynamic modulus of the asphaltenes doped and resins doped binder. / text
|
2 |
Quantum Perspectives on Physical and Inorganic ChemistryGrimes-Marchan, Thomas V. 12 1900 (has links)
Applications of computational quantum chemistry are presented, including an analysis of the photophysics of cyclic trinuclear coinage metal pyrazolates, an investigation into a potential catalytic cycle utilizing transition metal scorpionates to activate arene C-H bonds, and a presentation of the benchmarking of a new composite model chemistry (the correlation consistent composite approach, ccCA) for the prediction of classical barrier heights. Modeling the pyrazolate photophysics indicates a significant geometric distortion upon excitation and the impact of both metal identity and substituents on the pyrazolates, pointing to ways in which these systems may be used to produce rationally-tuned phosphors. Similarly, thermodynamic and structural investigations into the catalyst system points to promising candidates for clean catalytic activation of arenes. The ccCA was found to reproduce classical reaction barriers with chemical accuracy, outperforming all DFT, ab initio, and composite methods benchmarked.
|
3 |
How Does the Buffett Indicator Work in China?Gao, Ruixue 01 May 2020 (has links)
This study investigates whether the Buffett indicator can be used to make investment decisions in China. The investigation has two approaches. First, this study determines the scaling relationship between the Buffett Indicator and the GDP in China. Previous research and findings in this research regarding the scaling relationship can help international investors when comparing China with a different country as potential investment opportunities. Second, this study also examines whether the Buffett Indicator, the P/E ratio and composite models including the Buffett Indicator can be used as tools for international investors in predicting the Shanghai Index and making investment decisions for the Chinese stock market. The analysis is based on Chinese data from the World Bank, the National Bureau of Statistics of China, the Federal Reserve and the Yahoo Finance. This study finds that there is a sublinear relationship between the Buffett indicator and GDP in China and that the composite models which include the Buffett Indicator perform better to forecast the stock market in China than other indicators.
|
4 |
Modeling Flow, Melting, Solid Conveying and Global Behavior in Intermeshing Counter-Rotating Twin Screw ExtrudersJiang, Qibo 26 August 2008 (has links)
No description available.
|
5 |
モードⅡ荷重を受ける長繊維強化複合材料の層間マトリックスき裂先端での塑性領域來海, 博央, KIMACHI, Hirohisa, 田中, 拓, TANAKA, Hiroshi, 佐藤, 敏弘, SATOH, Toshihiro, 田中, 啓介, TANAKA, Keisuke 06 1900 (has links)
No description available.
|
6 |
モードⅠき裂を有する長繊維強化複合材料における塑性領域の弾塑性有限要素法解析來海, 博央, KIMACHI, Hirohisa, 田中, 拓, TANAKA, Hiroshi, 佐藤, 敏弘, SATOH, Toshihiro, 田中, 啓介, TANAKA, Keisuke 01 1900 (has links)
No description available.
|
Page generated in 0.0755 seconds