Global ETD Search

1	Design of a Low Power Cyclic/Algorithmic Analog-to-Digital Converter in a 130nm CMOS Process Puppala, Ajith kumar January 2012 (has links) Analog-to-digital converters are inevitable in the modern communication systems and there is always a need for the design of low-power converters. There are different A/D architectures to achieve medium resolution at medium speeds and among all those Cyclic/Algorithmic structure stands out due to its low hardware complexity and less die area costs. This thesis aims at discussing the ongoing trend in Cyclic/Algorithmic ADCs and their functionality. Some design techniques are studied on how to implement low power high resolution A/D converters. Also, non-ideal effects of SC implementation for Cyclic A/D converters are explored. Two kinds of Cyclic A/D architectures are compared. One is the conventional Cyclic ADC with RSD technique and the other is Cyclic ADC with Correlated Level Shift (CLS) technique. This ADC is a part of IMST Design + Systems International GmbH project work and was designed and simulated at IMST GmbH. This thesis presents the design of a 12-bit, 1 Msps, Cyclic/Algorithmic Analog-to-Digital Converter (ADC) using the “Redundant Signed Digit (RSD)” algorithm or 1.5-bit/stage architecture with switched-capacitor (SC) implementation. The design was carried out in 130nm CMOS process with a 1.5 V power supply. This ADC dissipates a power of 1.6 mW when run at full speed and works for full-scale input dynamic range. The op-amp used in the Cyclic ADC is a two-stage folded cascode structure with Class A output stage. This op-amp in typical corner dissipates 631 uW power at 1.5 V power supply and achieves a gain of 77 dB with a phase margin of 64° and a GBW of 54 MHz at 2 pF load. Redundant Signed Digit Correlated level Shifting Low power High Speed Folded cascode
2	A 1.2V 25MSPS Pipelined ADC Using Split CLS with Op-amp Sharing January 2012 (has links) abstract: ABSTRACT As the technology length shrinks down, achieving higher gain is becoming very difficult in deep sub-micron technologies. As the supply voltages drop, cascodes are very difficult to implement and cascade amplifiers are needed to achieve sufficient gain with required output swing. This sets the fundamental limit on the SNR and hence the maximum resolution that can be achieved by ADC. With the RSD algorithm and the range overlap, the sub ADC can tolerate large comparator offsets leaving the linearity and accuracy requirement for the DAC and residue gain stage. Typically, the multiplying DAC requires high gain wide bandwidth op-amp and the design of this high gain op-amp becomes challenging in the deep submicron technologies. This work presents `A 12 bit 25MSPS 1.2V pipelined ADC using split CLS technique' in IBM 130nm 8HP process using only CMOS devices for the application of Large Hadron Collider (LHC). CLS technique relaxes the gain requirement of op-amp and improves the signal-to-noise ratio without increase in power or input sampling capacitor with rail-to-rail swing. An op-amp sharing technique has been incorporated with split CLS technique which decreases the number of op-amps and hence the power further. Entire pipelined converter has been implemented as six 2.5 bit RSD stages and hence decreases the latency associated with the pipelined architecture - one of the main requirements for LHC along with the power requirement. Two different OTAs have been designed to use in the split-CLS technique. Bootstrap switches and pass gate switches are used in the circuit along with a low power dynamic kick-back compensated comparator. / Dissertation/Thesis / M.S. Electrical Engineering 2012 Electrical engineering Analog to Digital Converters Pipelined Data Converters Split Correlated Level Shifting
3	Triple Sampling an Application to a 14b 10 MS/s Cyclic Converter January 2012 (has links) abstract: Semiconductor device scaling has kept up with Moore's law for the past decades and they have been scaling by a factor of half every one and half years. Every new generation of device technology opens up new opportunities and challenges and especially so for analog design. High speed and low gain is characteristic of these processes and hence a tradeoff that can enable to get back gain by trading speed is crucial. This thesis proposes a solution that increases the speed of sampling of a circuit by a factor of three while reducing the specifications on analog blocks and keeping the power nearly constant. The techniques are based on the switched capacitor technique called Correlated Level Shifting. A triple channel Cyclic ADC has been implemented, with each channel working at a sampling frequency of 3.33MS/s and a resolution of 14 bits. The specifications are compared with that based on a traditional architecture to show the superiority of the proposed technique. / Dissertation/Thesis / Ph.D. Electrical Engineering 2012 Electrical engineering Correlated Level Shifting Cyclic Converters Data Converter Filter Stages Pipeline Converters Switched Capacitors
4	Ring amplification for switched capacitor circuits Hershberg, Benjamin Poris 19 July 2013 (has links) A comprehensive and scalable solution for high-performance switched capacitor amplification is presented. Central to this discussion is the concept of ring amplification. A ring amplifier is a small modular amplifier derived from a ring oscillator that naturally embodies all the essential elements of scalability. It can amplify with accurate rail-to-rail output swing, drive large capacitive loads with extreme efficiency using slew-based charging, naturally scale in performance according to process trends, and is simple enough to be quickly constructed from only a handful of inverters, capacitors, and switches. In addition, the gain-enhancement technique of Split-CLS is introduced, and used to extend the efficacy of ring amplifiers in specific and other amplifiers in general. Four different pipelined ADC designs are presented which explore the practical implementation options and design considerations relevant to ring amplification and Split-CLS, and are used to establish ring amplification as a new paradigm for scalable amplification. / Graduation date: 2012 / Access restricted to the OSU Community, at author's request, from July 19, 2012 - July 19, 2013 ring amplification ring amplifier ring amp ringamp RAMP Split-CLS CLS correlated level shifting switched-capacitor scaled CMOS scaling scalability analog to digital conversion A/D analog to digital converter ADC low power rail-to-rail slew-based stabilized ring oscillator high resolution Switched capacitor circuits

1

Page generated in 0.1191 seconds