Spelling suggestions: "subject:"customer software""
1 |
An Approach To Automating Data Collection For SimulationPortnaya, Irin 01 January 2004 (has links)
In past years many industries have utilized simulation as a means for decision making. That wave has introduced simulation as a powerful optimization and development tool in the manufacturing industry. Input data collection is a significant and complex event in the process of simulation. The simulation professionals have grown to accept it is as a strenuous but necessary task. Due to the nature of this task, data collection problems are numerous and vary depending on the situation. These problems may involve time consumption, lack of data, lack of structure, etc. This study concentrates on the challenges of input data collection for Discrete Event Simulation in the manufacturing industry and focuses particularly on speed, efficiency, data completeness and data accuracy. It has been observed that many companies have recently utilized commercial databases to store production data. This study proposes that the key to faster and more efficient input data collection is to extract data directly from these sources in a flexible and efficient way. An approach is introduced here to creating a custom software tool for a manufacturing setting that allows input data to be collected and formatted quickly and accurately. The methodology for the development of such a custom tool and its implementation, Part Data Collection, are laid out in this research. The Part Data Collection application was developed to assist in the simulation endeavors of Lockheed Martin Missiles and Fire Control in Orlando, Florida. It was implemented and tested as an aid in a large simulation project, which included modeling a new factory. This implementation resulted in 93% reduction in labor time associated with data collection and significantly improved data accuracy.
|
2 |
Smlouva o zhotovení softwaru / Custom Software Development AgreementKábrt, Filip January 2014 (has links)
Custom software development agreement is a very actual topic. Nowadays, the increasing demand for IT services puts greater demands on quality of legal services. Development of IT services in the Czech Republic also causes that more and more cases end up in court. One of important parts of IT services is the custom software development and the legal regulation of this phenomenon is the subject of this master's thesis. Custom software development agreement as a legal topic is a very specific topic, because it contains not only problematic issues from the field of law but also from more technical fields. To fully understand content of this work, it is necessary to have at least basic knowledge in the field of software development. Basic computer skills are then taken for granted. The topic of this thesis is very actual also because of the recodification of private law in the Czech Republic, which came into force during the elaboration of this thesis. Thesis will operate with the Czech law, because comparison with foreign legislation would require much larger scope of the paper, than the given one. This thesis aims to provide the most complex view of the custom software development agreement as possible, considering defined scope of this paper. Articles regarding this subject are mostly focused on the...
|
3 |
Modelagem de interação entre sinais cinemáticos durante o exercício / Interaction modeling among kinematic signals during exerciseNakashima, Giovana Yuko 12 April 2018 (has links)
Os programas de computador têm apoiado o estudo de sistemas biomédicos em que um volume considerável de dados são empregados. Na biomecânica, a análise das influências entre as articulações pode melhorar o conhecimento das lesões relacionadas à corrida associadas ao uso excessivo durante a atividade de corrida. Compreender os padrões de interação entre diferentes articulações anatômicas, durante o movimento, pode contribuir para o aprimoramento de programas de treinamento, reabilitação e prevenção a lesões. Neste trabalho, um software personalizado foi desenvolvido para implementar a Coerência Parcial Direcionada (PDC), uma abordagem no domínio da freqüência da Causalidade de Granger (GC), adequado às especificidades da fisioterapia. Com entradas independentes e padronizadas, modularização e parametrização, as rotinas investigaram a direção de interação entre diferentes canais, registrando e salvando arquivos intermediários. Separados nos três planos anatômicos, sagital, frontal e transverso, foram utilizados dados cinemáticos para analisar as interações entre tornozelo, joelho, quadril, pelve e tronco durante a corrida. Três modificações de técnica de corrida foram abordadas: com aterrissagem iniciada com o antepé, com aumento de 10% na taxa de passo e com aumento de flexão de tronco, além da habitual. As análises foram realizadas para o ciclo completo (apoio e balanço) e com separação da fase de apoio, e revelaram que essas duas estratégias de processamento são complementares. Comparando as influências proximal e distal, os procedimentos sugeriram uma predominância das interações proximal a distal, mostrando uma origem central de movimentos. Dessa forma, destaca-se a relevância em controlar e fortalecer tronco e quadril para a minimização de lesões. Considerando os resultados e a oportunidade de configuração, o software pode ser empregado para estudar outras articulações e aplicações, bem como evoluir para um sistema automatizado de apoio à decisão. / Computer programs have supported the study of biomedical systems in which a considerable amount of data is employed. In biomechanics, analysis of influences between joints can improve the knowledge of the Running-Related-Injuries (RRI) associated to overuse during running activity. Understanding the patterns of interaction among anatomical joints during movement can contribute to the improvement of training, rehabilitation and injury prevention programs. In this work, a customized software was developed to implement Partial Directed Coherence (PDC), an approach in the frequency domain of Granger Causality (GC), adapted to the physical therapy specificities. With independent and standardized inputs, modularization and parameterization, the routines investigated the interaction direction between different channels, logging and saving intermediate files. Separated in the three anatomical planes, sagittal, frontal and transverse, kinematic data were employed to analyze the interactions between ankle, knee, hip, pelvis and trunk during running. Three running technique modifications were addressed: forefoot strike landing pattern, increasing 10% of the step rate and increasing trunk flexion, in addition to usual running. The analyzes were performed for the complete cycle (stance and swing) and with separation of the stance phase, and revealed that these two processing strategies are complementary. Comparing proximal and distal influences, procedures suggested a predominance of proximal to distal interactions, showing a central origin of movements. In this way, the importance of controlling and strengthening trunk and hip to minimize injuries is highlighted. Considering the results and the processing configuration opportunity, the software can be employed to study other joints and applications, as well as evolve to an automated decision support system.
|
4 |
Modelagem de interação entre sinais cinemáticos durante o exercício / Interaction modeling among kinematic signals during exerciseGiovana Yuko Nakashima 12 April 2018 (has links)
Os programas de computador têm apoiado o estudo de sistemas biomédicos em que um volume considerável de dados são empregados. Na biomecânica, a análise das influências entre as articulações pode melhorar o conhecimento das lesões relacionadas à corrida associadas ao uso excessivo durante a atividade de corrida. Compreender os padrões de interação entre diferentes articulações anatômicas, durante o movimento, pode contribuir para o aprimoramento de programas de treinamento, reabilitação e prevenção a lesões. Neste trabalho, um software personalizado foi desenvolvido para implementar a Coerência Parcial Direcionada (PDC), uma abordagem no domínio da freqüência da Causalidade de Granger (GC), adequado às especificidades da fisioterapia. Com entradas independentes e padronizadas, modularização e parametrização, as rotinas investigaram a direção de interação entre diferentes canais, registrando e salvando arquivos intermediários. Separados nos três planos anatômicos, sagital, frontal e transverso, foram utilizados dados cinemáticos para analisar as interações entre tornozelo, joelho, quadril, pelve e tronco durante a corrida. Três modificações de técnica de corrida foram abordadas: com aterrissagem iniciada com o antepé, com aumento de 10% na taxa de passo e com aumento de flexão de tronco, além da habitual. As análises foram realizadas para o ciclo completo (apoio e balanço) e com separação da fase de apoio, e revelaram que essas duas estratégias de processamento são complementares. Comparando as influências proximal e distal, os procedimentos sugeriram uma predominância das interações proximal a distal, mostrando uma origem central de movimentos. Dessa forma, destaca-se a relevância em controlar e fortalecer tronco e quadril para a minimização de lesões. Considerando os resultados e a oportunidade de configuração, o software pode ser empregado para estudar outras articulações e aplicações, bem como evoluir para um sistema automatizado de apoio à decisão. / Computer programs have supported the study of biomedical systems in which a considerable amount of data is employed. In biomechanics, analysis of influences between joints can improve the knowledge of the Running-Related-Injuries (RRI) associated to overuse during running activity. Understanding the patterns of interaction among anatomical joints during movement can contribute to the improvement of training, rehabilitation and injury prevention programs. In this work, a customized software was developed to implement Partial Directed Coherence (PDC), an approach in the frequency domain of Granger Causality (GC), adapted to the physical therapy specificities. With independent and standardized inputs, modularization and parameterization, the routines investigated the interaction direction between different channels, logging and saving intermediate files. Separated in the three anatomical planes, sagittal, frontal and transverse, kinematic data were employed to analyze the interactions between ankle, knee, hip, pelvis and trunk during running. Three running technique modifications were addressed: forefoot strike landing pattern, increasing 10% of the step rate and increasing trunk flexion, in addition to usual running. The analyzes were performed for the complete cycle (stance and swing) and with separation of the stance phase, and revealed that these two processing strategies are complementary. Comparing proximal and distal influences, procedures suggested a predominance of proximal to distal interactions, showing a central origin of movements. In this way, the importance of controlling and strengthening trunk and hip to minimize injuries is highlighted. Considering the results and the processing configuration opportunity, the software can be employed to study other joints and applications, as well as evolve to an automated decision support system.
|
Page generated in 0.0321 seconds