Spelling suggestions: "subject:"czts.""
1 |
INVESTIGATION OF CADMIUM ZINC TELLURIDE DETECTOR FOR MEDICAL IMAGING APPLICATIONSZheng, Xiaoqing January 2017 (has links)
The wide band gap semiconductor Cadmium Zinc Telluride (CZT) is of recent
interest for medical imaging at room temperature. A number of properties, including
superior energy resolution, 3D photon position sensitivity, compact size, direct
photon conversion and energy-resolving capability, make CZT a promising candidate
for positron emission tomography (PET) and photon-counting X-ray imaging systems.
Despite these advantages, drawbacks, such as low mobility of holes, hole trapping,
charge sharing effect and characteristic X-ray escape degrade the performance of
large volume CZT detectors.
In this research, characterization and evaluation of single-crystal CZT photon
detector using simulation and experimental studies were done. First, a comprehensive
analytical model was developed and implemented by using Monte Carlo simulation
and finite element analyses. This model includes the generation and transportation of
charge carries within CZT detectors, and it provides useful guidance in optimizing the
electrode design and associated readout circuits.
Second, the performance of a 20×20×5mm3
CZT crystal with 8×8 pixel anodes
and a planar cathode was integrated with readout electronics that can be used to build
a PET system was studied. The experiments demonstrate an energy resolution of
~2.26±0.84% full width half maximum (FWHM) at 662 keV and 19±3 ns
coincidence time resolution with planar parallel field configuration. A novel
algorithm based on charge sharing effect and transient signal analysis targeting the
improvement of spatial resolution, was proposed. The sub-pitch spatial resolution is
found to be ~30 µm and ~250 µm under signal-to-noise ratio of ~17, for inside and
outside the valid range of charge sharing, respectively.
Finally, the feasibility of CZT in photon-counting Computed Tomography (CT)
was studied by using monoenergetic sources, with a special attention paid to energy
degradation due to characteristic X-ray escape and the charge sharing effect. The
effects of detector configuration and incident beam location were also investigated.
The results show that the pixel size can be reduced to 500 µm without significant
count loss (~5%) and charge loss (~15%) for the photo-counting X-ray applications. / Thesis / Doctor of Philosophy (PhD)
|
2 |
The Effect of Crystal Defects on the Performance of High-flux CZT X-ray DetectorsSadeghi, Niloofar 09 October 2015 (has links)
Cadmium Zinc Telluride (CZT) has been one of the most promising semiconductor materials for many years. Due to its high atomic number, suitable band-gap energy and ability to function at room temperature, CdZnTe has become the material of choice to be used as a room temperature radiation detector for many applications in the fields of medical imaging, process monitoring and national security, where demands and specifications set by those applications require that these detectors can operate well at the extreme conditions while maintaining good resolution, high detection efficiency, good reliability and high throughput.
In most applications, detectors are exposed to high flux of X-ray radiation. One of the most common issues is the degradation of these detectors due to the presence of extended and point defects, which can act as traps for the charge carriers. This charge trapping causes the build-up of space charge and disturbing the electric field, resulting incomplete charge collection and signal formation of the detectors.
This thesis investigates the associated failure modes by identifying the types of defects that exist in the CZT crystal and studies their roles in the performance of X-ray radiation detectors using in-house diagnostic tools. The results from different screening methods are compared and studied in order to find meaningful relationships and correlations that will help researchers to better understand the underlying physics and provide information and means for corrections and improvements of the crystal quality. / Graduate
|
3 |
Investigation of Sub-Pitch Spatial Resolution for Pixelated CZT X-Ray DetectorLi, Yike January 2017 (has links)
As everyone knows, cancer is one of the greatest health enemies of mankind and became a major public health problem all over the world. Moreover, lung cancer is the most common global cancer leading to more than 1.3 million estimated deaths annually worldwide. Breast cancer is the most common cancer and the 2nd leading cause of death from in women in the US, Canada, and China. Therefore an instrument for the early diagnosis and monitoring of cancers in areas such as lung and breast is immensely important and necessary.
The cadmium zinc telluride (CZT) semiconductor is a kind of novel radiation detector that can provide detailed information about spatial position. Also, the energy resulting from interactions between the radiation and the CZT material can also be assessed giving this type of detector added value in disease evaluation. A great deal of work on CZT detectors has been done for breast CT scanning. Furthermore, the CZT detector is also a potential solution for problems in lung cancer CT evaluation where the lack of energy information and high radiation exposure are less than ideal. Since sub-millimetre spatial resolution is required for post-contrast thoracic CT assessment, and $100~\mu m$ or better is critical for breast CT, the investigation of spatial resolution for CZT detectors is essential.
In this thesis, the interactions within CZT detectors were analyzed. The influence of different configurations, including adjustment of anode size, gap size, detector thickness and bias voltage, were discussed. Next the methods to evaluate two kinds of signals (collected and transit signals), are provided in Chapter~2. In Chapter~3, an intensity difference method and an intensity ratio method for estimating the sub-pitch spatial resolution were described in detail. Finally, a detector spatial resolution between $10~\mu m$ and $20~\mu m$ was achieved using the collecting signal intensities ratio method and a $4~mm$ thick CZT detector with gap size of $g=50~\mu m$ and bias voltage of $V=300V$.
Future work should focus on the contributions from characteristic X-rays emitted from cadmium and tellurium atoms. Also, the work presented was only on pixelated arrays and further assessment of cross-strip electrode detectors could also be of benefit. Lastly based on simulations done in this thesis all photons were assumed to strike the cathode at 90 degrees.
Future work should also include non-orthogonal directions for photons. / Thesis / Master of Applied Science (MASc)
|
4 |
Analyse et modélisation des performances d'un nouveau type de détecteur en médecine nucléaire : du détecteur Anger au détecteur semi-conducteur / Analysis and modelling of the performance of a new solid-state detector in nuclear medicine : from Anger- to Semiconductor-detectorsImbert, Laëtitia 10 December 2012 (has links)
La tomoscintigraphie myocardique est considérée comme un examen de référence pour le diagnostic et l'évaluation de la maladie coronarienne. Mise au point dans les années 1980, cette technique est en pleine mutation depuis l'arrivée de nouvelles caméras à semi-conducteurs. Deux caméras à semi-conducteurs, dédiées à la cardiologie nucléaire et utilisant des détecteurs de Cadmium Zinc Telluride sont actuellement commercialisées : la Discovery NM-530c (General Electric) et la DSPECT (Spectrum Dynamics). Les performances de ces caméras CZT ont été évaluées : 1) à la fois sur fantôme et sur des examens d'effort provenant de patients à faible probabilité de maladie coronaire, et 2) avec les paramètres d'acquisition et de reconstruction utilisés en clinique. Les résultats ont démontré la nette supériorité des caméras CZT en termes de sensibilité de détection, de résolution spatiale et de rapport contraste sur bruit par rapport à la génération de caméras d'Anger. Ces propriétés vont permettre de diminuer très fortement les temps d'acquisition et les activités injectées, tout en améliorant la qualité des images. Néanmoins, on connaît encore mal les limites et possibles artéfacts liés à la géométrie particulière d'acquisition. C'est pourquoi nous avons développé, avec la plateforme de simulations Monte Carlo GATE, un simulateur numérique spécifique de la caméra DSPECT. Nous avons pu ensuite le valider en comparant des données effectivement enregistrées aux données simulées. Ce simulateur pourrait aider à optimiser les protocoles de reconstruction et d'acquisition, en particulier les protocoles les plus complexes (acquisitions double traceur, études cinétiques) / Myocardial single-photon emission computed tomography (SPECT) is considered as the gold standard for the diagnosis of coronary artery disease. Developed in the 1980s with rotating Anger gamma-cameras, this technique could be dramatically enhanced by new imaging systems working with semi-conductor detectors. Two semiconductor cameras, dedicated to nuclear cardiology and equipped with Cadmium Zinc Telluride detectors, have been recently commercialized: the Discovery NM- 530c (General Electric) and the DSPECT (Spectrum Dynamics). The performances of these CZT cameras were compared: 1) by a comprehensive analysis of phantom and human SPECT images considered as normal and 2) with the parameters commonly recommended for SPECT recording and reconstruction. The results show the superiority of the CZT cameras in terms of detection sensitivity, spatial resolution and contrast-to-noise ratio, compared to conventional Anger cameras. These properties might lead to dramatically reduce acquisition times and/or the injected activities. However, the limits of these new CZT cameras, as well as the mechanism of certain artefacts, remain poorly known. That?s why we developed, with the GATE Monte Carlo simulation plateform, a specific simulator of the DSPECT camera. We validated this simulator by comparing actually recorded data with simulated data. This simulator may yet be used to optimize the recorded and reconstruction processes, especially for complex protocols such as simultaneous dual-radionuclide acquisition and kinetics first-pass studies
|
5 |
Characterization Of Cadmium Zinc Telluride Films And Solar Cells On Glass And Flexible Substrates By RF SputteringGaduputi, Jagadish 01 April 2004 (has links)
High performance multijunction solar cells based on polycrystalline thin films will require a wide bandgap top cell with at least 15% efficiency. With the bottom cell being CIGS which have already demonstrated the required efficiencies, this work aims to study the complete fabrication and performance of Cd1-xZnxTe solar cells with a bandgap of 1.7eV on glass and flexible polyimide substrates.
Cd1-xZnxTe films were deposited by RF magnetron co-sputtering with CdTe and ZnTe sources. By varying the composition of Cd1-xZnxTe being deposited the required bandgap of 1.7eV was achieved. The optical and structural properties of the films were studied with optical transmission, SEM and XRD measurements. The films exhibited high optical transmission and pinhole free grain structure. CZT solar cells were fabricated on glass and flexible polyimide substrate and were analyzed by J-V and spectral response measurements. The effect of post deposition treatments and the effect of N2 during sputtering on CZT device performance were studied.
|
6 |
An Eclipse Environment for ZXu, Chengdong January 2006 (has links)
This thesis reports on the design, implementation and evaluation of a new interactive Z environment that is integrated into the Eclipse environment. The Z language is a formal specification notation that is used to describe and model computer-based systems. For the widespread use of Z, it is desirable to integrate Z support with a mature and popular editing environment, such as Eclipse. Eclipse was chosen as the basis for the new Z environment because it is widely used, it provides rich functionality and it is designed to be extensible. The Z environment described in this thesis extends Eclipse to provide a large set of useful features for editing and analyzing Z specifications, such as a table of Z symbols, constant detection of syntax and type errors, outlining facilities, cross-referencing of Z names and conversion between different Z markups. User feedback shows that the resulting Z environment is helpful for editing and correcting Z specifications. The development of the Z support for Eclipse is a part of the CZT (Community Z Tools) project, which is a Java framework for building Z tools and provides parsers, typecheckers and other Z tools.
|
7 |
Analyse et modélisation des performances d'un nouveau type de détecteur en médecine nucléaire : du détecteur Anger au détecteur Semi-conducteurImbert, Laetitia 10 December 2012 (has links) (PDF)
La tomoscintigraphie myocardique est considérée comme un examen de référence pour le diagnostic et l'évaluation de la maladie coronarienne. Mise au point dans les années 1980 avec le développement des gamma-caméras d'Anger rotatives, cette technique est en pleine mutation depuis l'arrivée de nouvelles caméras à semi-conducteurs dont les performances sont nettement supérieures. Deux caméras à semi-conducteurs, dédiées à la cardiologie nucléaire et utilisant des détecteurs de Cadmium Zinc Telluride sont actuellement commercialisées : la Discovery NM-530c (General Electric) et la DSPECT (Spectrum Dynamics). Les performances de ces caméras CZT ont été évaluées : 1) à la fois sur fantôme et sur des examens d'effort provenant de patients à faible probabilité de maladie coronaire, et 2) avec les paramètres d'acquisition et de reconstruction utilisés en clinique. Les résultats ont démontré la nette supériorité des caméras CZT en termes de sensibilité de détection, de résolution spatiale et de rapport contraste sur bruit par rapport à la génération de caméras d'Anger. Ces propriétés vont permettre de diminuer très fortement les temps d'acquisition et les activités injectées, tout en améliorant la qualité des images. Néanmoins, on connaît encore mal les limites et possibles artéfacts liés à la géométrie particulière d'acquisition. Pour cela, nous avons développé un simulateur numérique à partir de la modélisation avec la plateforme GATE de la géométrie des détecteurs de la caméra DSPECT et de leur réponse en énergie. Des données effectivement enregistrées ont été comparées aux données simulées selon trois paramètres de performance : sensibilité de détection en mode tomographique, résolution spatiale et résolution en énergie. Les résultats sont concordants, ce qui permet de valider ce simulateur DSPECT et d'envisager de nombreuses études d'optimisation, en particulier pour les protocoles d'acquisition complexes (acquisitions double traceur, études cinétiques).
|
8 |
Caracterização dos detectores de telureto de cádmio e zinco (CZT) e fotodiodo de silício tipo pin (Si-PIN) para a espectrometria de raios-xCARVALHO, Antonio Jorge Oliveira de 31 January 2008 (has links)
Made available in DSpace on 2014-06-12T23:16:21Z (GMT). No. of bitstreams: 2
arquivo8663_1.pdf: 849697 bytes, checksum: e6471c5d7a6bcfb231ee39df5b803ace (MD5)
license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5)
Previous issue date: 2008 / Um conhecimento detalhado do espectro de raios-X é essencial para a análise de
equipamentos que emitem este tipo de radiação em unidades de radiodiagnóstico. As
informações sobre vários parâmetros contidas neste espectro são importantes para o controle
de qualidade dos aparelhos de raios-X. A espectrometria dos feixes de raios-X tem utilizado
detectores de GeHP que apresentam boa eficiência de detecção e alta resolução. Contudo, eles
necessitam de resfriamento com Nitrogênio líquido, o que dificulta a sua mobilidade e os
torna dispendiosos em várias aplicações. Neste estudo foram utilizados detectores de
Cd0,9Zn0,1Te (CZT) e Si-PIN refrigerados termoeletricamente para a construção de um sistema
de espectrometria. A resposta dos detectores para fótons monoenergéticos foi investigada com
raios-X e g emitidos por fontes calibradas de Am241, Ba133, Cd109 e Co57. Também foram
obtidos espectros de raios-X contínuos a partir de irradiações com um gerador de raios-X
industrial para tensões de aceleração na faixa de 40 kV a 120 kV, com e sem uso de filtros. A
distorção nos espectros devida à transmissão de raios-X primários e ao escape de raios-X
secundários vindos do cristal foi corrigida pela eficiência de detecção por meio do código
Monte Carlo GEANT4. Os espectros de raios-X corrigidos apresentaram uma boa
concordância com os espectros do catálogo de referência. Os resultados indicaram que os
detectores de CZT e Si-PIN possuem desempenho compatível com os detectores de GeHP e
portanto, são adequados para espectrometria de raios-X diagnóstico e fluorescência de raios-
X, respectivamente, considerando-se que a correção apropriada seja aplicada
|
9 |
Investigations on CdZnTe-Semiconductor-Detectors for the Search of the Neutrinoless Double Beta DecayGehre, Daniel 11 September 2018 (has links)
The Cadmium-Zinc-Telluride 0-Neutrino-Double-Beta Research Apparatus (COBRA-Experiment) investigates the theoretically predicted neutrinoless double beta decay (0νββ-decay) to indirectly determine the effective Ma- jorana mass of the electron-neutrino by a measurement of the half-life of the 0νββ-decay using room-temperature semiconducting Cadmium-Zinc- Telluride-detectors (CZT). The detectors are made of elements containing several isotopes that decay via double beta decay (ββ-decay). In such a con- figuration the detector itself becomes the source of the decay and, hence, the efficiency for the detection of such events rises.
This work covers the investigations and characterizations made on the CZT detectors used in the COBRA-Experiment, currently running. Prior to in- stallation the physical properties of the detectors are analyzed and during operation the stability of the detectors is monitored. For the laboratory analysis three dedicated setups are developed that allow for detailed inves- tigations of different properties of the detectors. Beside the working point determination and the analysis of the temperature dependence of the de- tector performance, the spatial detector response to localized irradiation is analyzed and a setup to generate a library of specific pulse shapes is designed and operated. Furthermore, an investigation for a possible discrimination of α- and β-decay events based on pulse shape discrimination is performed as well as an analysis of the long term stability of underground operated CZT detectors.
|
10 |
Instrumentation of CdZnTe detectors for measuring prompt gamma-rays emitted during particle therapy / Instrumentierung von CdZnTe Detektoren zur Messung prompter Gammastrahlung während der TeilchentherapieFödisch, Philipp 15 May 2017 (has links) (PDF)
Background: The irradiation of cancer patients with charged particles, mainly protons and carbon ions, has become an established method for the treatment of specific types of tumors. In comparison with the use of X-rays or gamma-rays, particle therapy has the advantage that the dose distribution in the patient can be precisely controlled. Tissue or organs lying near the tumor will be spared. A verification of the treatment plan with the actual dose deposition by means of a measurement can be done through range assessment of the particle beam. For
this purpose, prompt gamma-rays are detected, which are emitted by the affected target volume during irradiation.
Motivation: The detection of prompt gamma-rays is a task related to radiation detection and measurement. Nuclear applications in medicine can be found in particular for in vivo diagnosis. In that respect the spatially resolved measurement of gamma-rays is an essential technique for nuclear imaging, however, technical requirements of radiation measurement during particle therapy are much more challenging than those of classical applications. For this purpose, appropriate instruments beyond the state-of-the-art need to be developed and tested for detecting prompt gamma-rays. Hence the success of a method for range assessment of particle beams is largely determined by the implementation of electronics. In practice, this means that a suitable detector material with adapted readout electronics, signal and information processing, and data interface must be utilized to solve the challenges. Thus, the parameters of the system (e.g. segmentation, time or energy resolution) can be optimized depending on the method (e.g. slit camera, time-of-flight measurement or Compton camera). Regardless of the method, the detector system must have a high count rate capability and a large measuring range (>7 MeV). For a subsequent evaluation of a suitable method for imaging, the mentioned parameters may not be restricted by the electronics. Digital signal processing is predestined for multipurpose tasks, and, in terms of the demands made, the performance of such an implementation has to be determined.
Materials and methods: In this study, the instrumentation of a detector system for prompt gamma-rays emitted during particle therapy is limited to the use of a cadmium zinc telluride (CdZnTe, CZT) semiconductor detector. The detector crystal is divided into an 8x8 pixel array by segmented electrodes. Analog and digital signal processing are exemplarily tested with this type of detector and aims for application of a Compton camera to range assessment. The electronics are implemented with commercial off-the-shelf (COTS) components. If applicable, functional units of the detector system were digitalized and implemented in a field-programmable gate array (FPGA). An efficient implementation of the algorithms in terms of timing and logic utilization is fundamental to the design of digital circuits. The measurement system is characterized with radioactive sources to determine the measurement dynamic range and resolution. Finally, the performance is examined in terms of the requirements of particle therapy with experiments at particle accelerators.
Results: A detector system based on a CZT pixel detector has been developed and tested. Although the use of an application-specific integrated circuit is convenient, this approach was rejected because there was no circuit available which met the requirements. Instead, a multichannel, compact, and low-noise analog amplifier circuit with COTS components has been implemented. Finally, the 65 information channels of a detector are digitized, processed and visualized.
An advanced digital signal processing transforms the traditional approaches of nuclear electronics in algorithms and digital filter structures for an FPGA. With regard to the characteristic signals (e.g. varying rise times, depth-dependent energy measurement) of a CZT pixel detector, it could be shown that digital pulse processing results in a very good energy resolution (~2% FWHM at 511 keV), as well as permits a time measurement in the range of some tens of nanoseconds. Furthermore, the experimental results have shown that the dynamic range of the detector system could be significantly improved compared to the existing prototype of the Compton camera (~10 keV..7 MeV). Even count rates of ~100 kcps in a high-energy beam could be ultimately processed with the CZT pixel detector. But this is merely a limit of the detector due to its volume, and not related to electronics. In addition, the versatility of digital signal processing has been demonstrated with other detector materials (e.g. CeBr3). With foresight on high data throughput in a distributed data acquisition from multiple detectors, a Gigabit Ethernet link has been implemented as data interface.
Conclusions: To fully exploit the capabilities of a CZT pixel detector, a digital signal processing is absolutely necessary. A decisive advantage of the digital approach is the ease of use in a multichannel system. Thus with digitalization, a necessary step has been done to master the complexity of a Compton camera. Furthermore, the benchmark of technology shows that a CZT pixel detector withstands the requirements of measuring prompt gamma-rays during particle therapy. The previously used orthogonal strip detector must be replaced by the pixel detector in favor of increased efficiency and improved energy resolution. With the integration of the developed digital detector system into a Compton camera, it must be ultimately proven whether this method is applicable for range assessment in particle therapy. Even if another method is more convenient in a clinical environment due to practical considerations, the detector system of that method may benefit from the shown instrumentation of a digital signal processing system for nuclear applications. / Hintergrund: Die Bestrahlung von Krebspatienten mit geladenen Teilchen, vor allem Protonen oder Kohlenstoffionen, ist mittlerweile eine etablierte Methode zur Behandlung von speziellen Tumorarten. Im Vergleich mit der Anwendung von Röntgen- oder Gammastrahlen hat die Teilchentherapie den Vorteil, dass die Dosisverteilung im Patienten präziser gesteuert werden kann. Dadurch werden um den Tumor liegendes Gewebe oder Organe geschont. Die messtechnische Verifikation des Bestrahlungsplans mit der tatsächlichen Dosisdeposition kann über eine Reichweitenkontrolle des Teilchenstrahls erfolgen. Für diesen Zweck werden prompte Gammastrahlen detektiert, die während der Bestrahlung vom getroffenen Zielvolumen emittiert werden.
Fragestellung: Die Detektion von prompten Gammastrahlen ist eine Aufgabenstellung der Strahlenmesstechnik. Strahlenanwendungen in der Medizintechnik finden sich insbesondere in der in-vivo Diagnostik. Dabei ist die räumlich aufgelöste Messung von Gammastrahlen bereits zentraler Bestandteil der nuklearmedizinischen Bildgebung, jedoch sind die technischen Anforderungen der Strahlendetektion während der Teilchentherapie im Vergleich mit klassischen Anwendungen weitaus anspruchsvoller. Über den Stand der Technik hinaus müssen für diesen Zweck geeignete Instrumente zur Erfassung der prompten Gammastrahlen entwickelt und erprobt werden. Die elektrotechnische Realisierung bestimmt maßgeblich den Erfolg eines Verfahrens zur Reichweitenkontrolle von Teilchenstrahlen. Konkret bedeutet dies, dass ein geeignetes Detektormaterial mit angepasster Ausleseelektronik, Signal- und Informationsverarbeitung sowie Datenschnittstelle zur Problemlösung eingesetzt werden muss. Damit können die Parameter des Systems (z. B. Segmentierung, Zeit- oder Energieauflösung) in Abhängigkeit der Methode (z.B. Schlitzkamera, Flugzeitmessung oder Compton-Kamera) optimiert werden. Unabhängig vom Verfahren muss das Detektorsystem eine hohe Ratenfestigkeit und einen großen Messbereich (>7 MeV) besitzen. Für die anschließende Evaluierung eines geeigneten Verfahrens zur Bildgebung dürfen die genannten Parameter durch die Elektronik nicht eingeschränkt werden. Eine digitale Signalverarbeitung ist für universelle Aufgaben prädestiniert und die Leistungsfähigkeit einer solchen Implementierung soll hinsichtlich der gestellten Anforderungen bestimmt werden.
Material und Methode: Die Instrumentierung eines Detektorsystems für prompte Gammastrahlen beschränkt sich in dieser Arbeit auf die Anwendung eines Cadmiumzinktellurid (CdZnTe, CZT) Halbleiterdetektors. Der Detektorkristall ist durch segmentierte Elektroden in ein 8x8 Pixelarray geteilt. Die analoge und digitale Signalverarbeitung wird beispielhaft mit diesem Detektortyp erprobt und zielt auf die Anwendung zur Reichweitenkontrolle mit einer Compton-Kamera. Die Elektronik wird mit seriengefertigten integrierten Schaltkreisen umgesetzt. Soweit möglich, werden die Funktionseinheiten des Detektorsystems digitalisiert und in einem field-programmable gate array (FPGA) implementiert. Eine effiziente Umsetzung der Algorithmen in Bezug auf Zeitverhalten und Logikverbrauch ist grundlegend für den Entwurf der digitalen Schaltungen. Das Messsystem wird mit radioaktiven Prüfstrahlern hinsichtlich Messbereichsdynamik und Auflösung charakterisiert. Schließlich wird die Leistungsfähigkeit hinsichtlich der Anforderungen der Teilchentherapie mit Experimenten am Teilchenbeschleuniger untersucht.
Ergebnisse: Es wurde ein Detektorsystem auf Basis von CZT Pixeldetektoren entwickelt und erprobt. Obwohl der Einsatz einer anwendungsspezifischen integrierten Schaltung zweckmäßig wäre, wurde dieser Ansatz zurückgewiesen, da kein verfügbarer Schaltkreis die Anforderungen erfüllte. Stattdessen wurde eine vielkanalige, kompakte und rauscharme analoge Verstärkerschaltung mit seriengefertigten integrierten Schaltkreisen aufgebaut. Letztendlich werden die 65 Informationskanäle eines Detektors digitalisiert, verarbeitet und visualisiert. Eine fortschrittliche digitale Signalverarbeitung überführt die traditionellen Ansätze der Nuklearelektronik in Algorithmen und digitale Filterstrukturen für einen FPGA. Es konnte gezeigt werden, dass die digitale Pulsverarbeitung in Bezug auf die charakteristischen Signale (u.a. variierende Anstiegszeiten, tiefenabhängige Energiemessung) eines CZT Pixeldetektors eine sehr gute Energieauflösung (~2% FWHM at 511 keV) sowie eine Zeitmessung im Bereich von einigen 10 ns ermöglicht. Weiterhin haben die experimentellen Ergebnisse gezeigt, dass der Dynamikbereich des Detektorsystems im Vergleich zum bestehenden Prototyp der Compton-Kamera deutlich verbessert werden konnte (~10 keV..7 MeV). Nach allem konnten auch Zählraten von >100 kcps in einem hochenergetischen Strahl mit dem CZT Pixeldetektor verarbeitet werden. Dies stellt aber lediglich eine Begrenzung des Detektors aufgrund seines Volumens, nicht jedoch der Elektronik, dar. Zudem wurde die Vielseitigkeit der digitalen Signalverarbeitung auch mit anderen Detektormaterialen (u.a. CeBr3) demonstriert. Mit Voraussicht auf einen hohen Datendurchsatz in einer verteilten Datenerfassung von mehreren Detektoren, wurde als Datenschnittstelle eine Gigabit Ethernet Verbindung implementiert.
Schlussfolgerung: Um die Leistungsfähigkeit eines CZT Pixeldetektors vollständig auszunutzen, ist eine digitale Signalverarbeitung zwingend notwendig. Ein entscheidender Vorteil des digitalen Ansatzes ist die einfache Handhabbarkeit in einem vielkanaligen System. Mit der Digitalisierung wurde ein notwendiger Schritt getan, um die Komplexität einer Compton-Kamera beherrschbar zu machen. Weiterhin zeigt die Technologiebewertung, dass ein CZT Pixeldetektor den Anforderungen der Teilchentherapie für die Messung prompter Gammastrahlen stand hält. Der bisher eingesetzte Streifendetektor muss zugunsten einer gesteigerten Effizienz und verbesserter Energieauflösung durch den Pixeldetektor ersetzt werden. Mit der Integration des entwickelten digitalen Detektorsystems in eine Compton-Kamera muss abschließend geprüft werden, ob dieses Verfahren für die Reichweitenkontrolle in der Teilchentherapie anwendbar ist. Auch wenn sich herausstellt, dass ein anderes Verfahren unter klinischen Bedingungen praktikabler ist, so kann auch dieses Detektorsystem von der gezeigten Instrumentierung eines digitalen Signalverarbeitungssystems profitieren.
|
Page generated in 0.0686 seconds