As for the 3D deformable surface recovery, the key challenge arises from the difficulty in estimating a large number of 3D shape parameters from noisy observations. In this thesis, 3D deformable surface tracking is formulated into an unconstrained quadratic problem that can be solved very efficiently by resolving a set of sparse linear equations. Furthermore, the robust progressive finite Newton method developed for nonrigid surface detection is employed to handle the large outliers. / For the appearance-based method, a deformable Lucas-Kanade algorithm is proposed which triangulates the template image into small patches and constrains the deformation through the second order derivatives of the mesh vertices. It is formulated into a sparse regularized least squares problem which is able to reduce the computational cost and the memory requirement. The inverse compositional algorithm is applied to efficiently solve the optimization problem. Furthermore, we present a fusion approach to take advantage of both the appearance information and the local features. / In addition to the methodologies studied and evaluated in computer vision, this thesis also investigates the nonrigid surface recovery in some real-world multimedia applications, such as Near-duplicate image retrieval and detection. In contrast to conventional approaches, the presented technique can recover an explicit mapping between two near-duplicate images with a few deformation parameters and find out the correct correspondences from noisy data effectively. To make the proposed technique applicable to large-scale applications, an effective multilevel ranking scheme is presented that filters out the irrelevant results in a coarse-to-fine manner. To overcome the extremely small training size challenge, a semi-supervised learning method is employed to improve the performance using unlabeled data. Extensive evaluations show that the presented method is clearly effective than conventional approaches. / Recovering deformable surfaces is an interesting and beneficial research problem for computer vision and image analysis. An effective deformable surface recovery technique can be applied in a variety of applications for surface reconstruction, digital entertainment, medical imaging and Augmented Reality. While considerable research efforts have been devoted to deformable surface modeling and fitting, there are only few schemes available to tackle the deformable surface recovery problem efficiently. This thesis proposes a set of methods to effectively solve the 2D nonrigid shape recovery and 3D deformable surface tracking based on a robust progressive optimization scheme. The presented techniques are also applied to a variety of real-world applications. / To tackle the 2D nonrigid shape recovery problem, this thesis first presents a novel progressive finite Newton optimization scheme, which is based on the local feature correspondences. The key of this approach is to formulate the nonrigid shape recovery as an unconstrained quadratic optimization problem which has a closed-form solution for a given set of observations. / Without resorting to an explicit deformable mesh model, the nonrigid surface detection can be treated as a generic regression problem. A novel velocity coherence constraint is imposed on the deformable shape model to regularize the ill-posed optimization problem. To handle the large outliers, a progressive optimization scheme is employed. / Zhu, Jianke. / Adviser: Michael R. Lyu. / Source: Dissertation Abstracts International, Volume: 70-09, Section: B, page: . / Thesis submitted in: December 2008. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2009. / Includes bibliographical references (leaves 161-175). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.

Severe plastic deformation (SPD) has been used over the past few decades for producing submicron grain (SMG) structures in range of metals and alloys. Equal channel angular pressing (ECAP) is a useful process for producing these types of structures whereby the material is deformed to very high plastic strains by passing a billet several times through the ECAP die. This process has an added advantage maintaining the initial dimensions of the billet. SMG materials produced by ECAP and related routes are useful as they usually exhibit excellent properties including high strength and hardness, and excellent superplastic formability: these and other properties make SMG materials useful for industrial and aerospace applications. In this thesis, a binary aluminium alloy containing a very low concentration of scandium (0.1 wt. %) Sc alloy was investigated and compared with higher Sc-containing alloys. The material was deformed by ECAP in the solution treated condition to an equivalent von Mises strain of 9.2 then pre-aged at 250 0C to generate a submicron grained material containing a relatively uniform dispersion of nanosized Al3Sc dispersiods. The thermal stability of this pre-aged microstructure was investigated by annealing at temperatures up to 450 0C resulted in continuous grain coarsening by the process of continuous recrystallization whereby the initial microstructure evolves gradually with no marked change in the grain size distribution, texture and grain boundary character. However, extended annealing (> 1h) at 4500 C resulted in discontinuous grain coarsening (often termed recrystallization) whereby a few grains grow rapidly to eventually produce a coarse-grained final microstructure. Throughout annealing, there was a good correlation between the dispersion parameter, (f/d) where f and d is the volume fraction and the mean diameter of Al3Sc particles in the alloy, respectively, and both the mean grain size (D ) and D /D max where max D is the maximum grain diameter observed in the microstructure. The grain structure was found to undergo moderate coarsening at the high f/d-values but converted to a coarsegrained structure for f/d ~<0.5/μm, and this change occurred when the mean grain diameter was ~ 3-4μm. Hence, the critical value of the dispersion parameter for the transition from continuous to discontinuous coarsening falls between the theoretical value for submicron grain size alloys (f/d ~ 1.5/μm) and the value found for conventionally-deformed alloys (f/d ~ 0.1/μm). This behaviour is the result of the alloy no longer being ultra-fine grained at the onset of discontinuous coarsening.

The Australian-Pacific plate boundary is an uncomplicated structure along most of its length in the South Island, New Zealand. In South Westland, south of the Arawata River, however, several terranes converge onto the Alpine fault. Inherent anisotropies arising from the position of pre-existing fault structures, lithological contacts and rheological heterogeneities within these give rise to an atypically diffuse and complex zone, the overall geometry of which resembles a regional scale transpressive flower structure. The flower structure is a broad deformation zone 60 km in length extending approximately 7 km from the Alpine fault to its eastern limit, the Dun Mountain Ophiolite Belt. Integral parts of the structure are the Hollyford Fault System and the Livingstone Fault System. The area is characterised by an array of left-stepping, subparallel faults with an average 060� strike linked by 020� striking structures. All fault traces offset Quaternary features. Fractions of the total interplate slip are partitioned across the reactivated structures. Additionally, kinematic indicators reveal partitioning of strike-slip and oblique/dip-slip deformation across the related secondary fault zones. The behaviour of the plate boundary zone in South Westland is fundamentally controlled by reactivation of the Hollyford Fault System and the Livingstone Fault System which partition slip away from the Alpine fault. As a consequence, the eastward transferral of slip onto the curved geometry of the converging fault systems has ultimately created a left-stepping contractional regime, the equivalent of a restraining bend in the plate boundary zone. The competent Dun Mountain Ophiolite Belt controls the geometry and evolution of the reactivated structures. It also acts as an indenter and imposes additional boundary conditions adding to the shortening component in the region and the onset of complex transpressional strain patterns. The geometry and kinematics of the flower structure in the upper crust is mimicked in the ductile mid to lower crust. Upper greenschist facies mylonites reveal a complex fold pattern developed in response to contemporaneous non-coaxial and coaxial deformation. The folding formed during a continuation of deformation associated with mylonitisation at depths within the fault system. The fact that strain localisation and transpressive strain patterns in the brittle crust continue into the ductile zones suggests there is a feedback relationship between the two regimes. The reactivation of pre-existing structures and the influence of rheological factors are considered as first order factors controlling strain partitioning in the plate boundary zone. Recognition of local strain partitioning is important for assessing slip rates and earthquake recurrence. Similarly, the faults extend down below the seismogenic zone so that interaction of the different structures with each other may produce changes in fault behaviour which affects earthquake nucleation. Although the Alpine fault is a major structure in the South Island of New Zealand with over 400 km of dextral movement, the reactivated structures still exert a degree of control locally on the structure and kinematics of the plate boundary zone. Reactivation of inherent fault structures has important implications for the initiation of plate boundary faults and the alteration of the plate boundary geometry with evolving deformation.

Zugl.: Hannover, Universiẗat, Diss., 2007.

Zugl.: Karlsruhe, Univ., Diss., 2003

Multilayered aluminium alloy composites were produced by accumulative roll bonding (ARB) to very high strain to generate sheet materials consisting of either 32 or 64 alternating layers of Al and Al-0.3w.%Sc alloy. Based on the starting heat treatment condition of the Al(Sc) alloy and the roll bonding temperature, several different Al/Al(Sc) combinations were produced: (i) SSSS-ARB (Al(Sc) in the supersaturated condition; Tdef = 200 ???C; 32 layers); (ii) Aged-ARB (Al(Sc) in the artificially aged condition; Tdef = 200 ???C; 32 layers), and (iii) SSSS-ARB-HT (Al(Sc) in the SSSS condition; Tdef = 350 ???C; 64 layers). Regardless of the roll bonding conditions, Al(Sc) in the form of a dispersion of ultrafine Al3Sc particles strongly impedes structural changes during thermomechanical processing whereas Al readily undergoes extensive dynamic and static restoration. The major aim of the thesis is to understand the effect of initial microstructure and processing conditions on microstructural development in these multilayered Al/Al(Sc) composites. The microstructures were investigated mainly by backscatter electron (BSE) and ion channeling contrast (ICC) imaging in the DualBeam Platform and transmission electron microscopy (TEM) whereas the crystallographic nature of the microstructures were investigated by electron backscatter diffraction (EBSD) and the various diffraction techniques available in the TEM. The mechanical properties of the materials were investigated by hardness and tensile testing. The deformation microstructure and texture of these two alloy combinations were strongly influenced by both the initial heat treatment condition of the Al(Sc) alloy whereby large-scale shear bands are generated during rolling when a dispersion of fine Al3Sc particles is present in the Al(Sc) layers. The deformation mechanism of both SSSS-ARB and Aged-ARB was strongly controlled by the relative hardening behaviour of adjacent layers. In Aged-ARB, a higher magnitude of in-plane shear stress, exceeding the flow stress of Al(Sc), was operative at the interfaces between layers; this was shown to cause the shear banding in this material. All materials were annealed for up to 6h at 350 ??C. This extended annealing generated alternating layers of coarse grains (Al layers) and a recovered substructure (Al(Sc) layers) with the substantial waviness of the layers in both Aged-ARB and SSSS-ARB-HT being inherited from the as-deformed material. While the Al(Sc) layers remain unrecrystallized in all materials due to particle pinning effects, the Al layers underwent continuous and discontinuous recrystallization after low and high temperature roll bonding, respectively. Shear banding in Aged-ARB also resulted in a reduction in intensity of the rolling texture components and had a randomizing effect on the recrystallization texture of the Al layers. The Al/A(Sc) multilayered composites were found to conform to the classic inverse strength/ductility relationship and no significant improvement in ductility (for a given strength) was evident. The barriers to achieving an excellent combination of ductility and strength (i.e. toughness) in these materials were identified to be delamination of the layers, which can be largely reduced (or eliminated) by careful control of starting materials (heat treatment condition and thickness) as well as the processing parameters during ARB.

<p>A problem with cold pilgered tubes for OCTG applications is that they can get anisotropic properties with regard to yield strength. One source of anisotropy is texture that is developed during the cold deformation. EBSD measurements have been made on several austenitic stainless steels with different deformations to see what influence the composition has on the texture formation. The same measurements were used to study the influence of grain size on texture formation. The conclusion was that the composition can have an impact on the texture and hence has potential to also affect the anisotropy. The differences in texture cannot be associated with a specific alloying element, but is rather a synergetic effect. It was also concluded that grain structure has no strong influence on texture formation. An evaluation of three different tool designs used for cold pilgering was made. The designs evaluated are referred to as design A, B and C. EBSD measurements showed large deviations in texture in the middle of the wall compared to close to the surface of pilgered OCTG. However, the measurements showed no large differences between the three designs and the texture could not be coupled to the anisotropy.</p>

No description available.

In this study, Thermomechanical properties of Ti-50.8 and 50.7 at% Ni alloy severely deformed using Equal Channel Angular Extrusion (ECAE) are investigated. The aim of this study is to reveal the effects of severe plastic deformation on shape memory, pseudelasticity, interplay between plastic deformation via dislocation slip and twinning, and forward and reverse martensitic transformation. The samples are processed at room temperature, i.e. slightly above the austenite finish temperature, and at 450 °C, i.e. well-above the austenite finish temperature. Transformation temperatures, microstructural evolution, and thermomechanical properties of ECAE processed samples are studied before and after low temperature annealing heat treatment and compared with conventional cold drawn and precipitation hardened material. The unique findings are: 1) the observation of a mixture of heavily deformed B2 (austenite) and B19’ (martensite) phases in the samples processed at room temperature although martensite stabilization was expected, 2) the observation of highly organized, twin-related nanograins in B2 phase of the samples deformed at room temperature which was attributed to B2 to B19' via SIM, and B19' to B2 via SPD (SIM: Stress Induced Martensitic transformation, SPD: Severe Plastic Deformation) transformation sequence, 3) simultaneous observation of B2 austenite and strain induced B19’ martensite in the samples deformed at 450 °C, and 4) perfect pseudoelasticity, small pseudoelastic stress hysteresis and excellent cyclic response with no irrecoverable strain up to 1000 cycles for ECAE at 450 °C processed sample. Strain induced martensite in NiTi alloys was reported for the first time. The formation of well-organized twin-related nanograins via severe plastic deformation opens a new opportunity for twinning induced grain boundary engineering in NiTi alloys which significantly improves the matrix strength and the cyclic response against degradation of shape memory and pseudoelasticity.

No description available.