Spelling suggestions: "subject:"multiplexer""
1 |
A Si Schottky diode demultiplexer circuit for high bit rate fiber optical receiversChoi, Jung Han. January 2004 (has links) (PDF)
München, Techn. University, Diss., 2004.
|
2 |
Design and Fabrication of a 3-wavelength Optical Demultiplexer in GlassOtman Twati, Mohamed January 2001 (has links)
No description available.
|
3 |
MULTIPLEXER / DEMULTIPLEXER IMPLEMENTATION USING A CCSDS FORMATGrebe, David L. 10 1900 (has links)
International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada / A multiplexer / demultiplexer design suitable to a wide range of input data types and link
formats is presented. Based on the Consultative Committee on Space Data Systems
(CCSDS) recommendations for Packet Telemetry, the design translates the prescribed
layered architecture into a modular, layered hardware implementation. The design
approach minimizes hardware yielding increased reliability and decreased product cost
while retaining a high degree of flexibility. This implementation can be applied to flight
data acquisition (direct transmission to the ground or recorded), ground data collection
(including multi-stream record systems) and inter-range communications.
The use of an internationally recognized standard promotes inter-service interoperability
and facilitates data handling/routing throughout a wide community.
|
4 |
Entwicklung einer Testumgebung für einen ASIC im Rahmen des ATLAS L-1-TriggersWagner, Gregor. January 1999 (has links)
Heidelberg, Univ. Diplomarb., 1996.
|
5 |
Measurement of Telemetry Signal Delays Caused by the Use of Asynchronous Multiplexers/DemultiplexersLaw, Eugene L. 10 1900 (has links)
International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California / This paper will describe a test technique developed to measure the delays caused by the use of asynchronous multiplexers/demultiplexers. These devices are used for both signal transmission (microwave and fiber optic) and signal recording (especially helical scan digital recorders). The test technique involves the generation and decoding of asynchronous telemetry signals. The bit rates of the telemetry signals are variable. Relative time is embedded in the telemetry signal as a 32-bit data word. The paper will also present measured delays for two multiplexers/demultiplexers for different combinations of bit rates.
|
6 |
InP DHBT-based clock and data recovery circuits for ultra-high-speed optical data linksMakon, Robert Elvis January 2006 (has links)
Zugl.: Karlsruhe, Univ., Diss., 2006
|
7 |
HIGH SPEED ASYNCHRONOUS DATA MULTIPLEXER/ DEMULTIPLEXER FOR HIGH DENSITY DIGITAL RECORDERSBerdugo, Albert, Small, Martin 10 1900 (has links)
International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California / Modern High Density Digital Recorders (HDDR) are ideal devices for the storage of large
amounts of digital and/or wideband analog data. Ruggedized versions of these recorders
are currently available and are supporting many military and commercial flight test
applications. However, in certain cases, the storage format becomes very critical, e.g.,
when a large number of data types are involved, or when channel-to-channel correlation is
critical, or when the original data source must be accurately recreated during post mission
analysis. A properly designed storage format will not only preserve data quality, but will
yield the maximum storage capacity and record time for any given recorder family or data
type.
This paper describes a multiplex/demultiplex technique that formats multiple high speed
data sources into a single, common format for recording. The method is compatible with
many popular commercial recorder standards such as DCRsi, VLDS, and DLT. Types of
input data typically include PCM, wideband analog data, video, aircraft data buses,
avionics, voice, time code, and many others. The described method preserves tight data
correlation with minimal data overhead.
The described technique supports full reconstruction of the original input signals during
data playback. Output data correlation across channels is preserved for all types of data
inputs. Simultaneous real-time data recording and reconstruction are also supported.
|
8 |
Monolithically integrated gain shifted Mach-Zehnder interferometer for all-optical demultiplexingTekin, Tolga. Unknown Date (has links) (PDF)
Techn. University, Diss., 2004--Berlin.
|
9 |
COMBINING GPS AND PACKETIZED TELEMETRY CONCEPTS TO FORM A WIDE AREA DATA MULTIPLEX SYSTEMGrebe, David L. 10 1900 (has links)
International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / As testing requirements on the ranges require ever more sophisticated cross correlation of data from multiple data acquisition sources, it becomes increasingly advantageous to collect and disseminate this information in a more network oriented fashion. This allows any of the data collected at physically separated sites to be used simultaneously at multiple mission control or data reduction centers. This paper presents an approach that maximizes the use of legacy communication paths and data reduction systems to support an evolutionary migration toward the day when testing can take full advantage of commercial communication protocols and equipment such as OC-3, ATM, etc. One key element of this approach is the packetizing of data at each reception point to provide virtual circuit switching using packet routing. Based on the newly adopted IRIG/RCC 107-98 standard, the system may even be expanded all the way back to the actual sensors. The second key element is the use of the readily available time and timing pulses based on GPS to establish a uniform sampling interval that will allow the cross correlation of data received at different points spread over a wide area.
|
10 |
The Design of Multi-channel Wavelength Division Multiplexing Based on Two-Dimensional Photonic CrystalsKuo, Hung-Fu 03 July 2007 (has links)
The communication system using Wavelength-division multiplexing (WDM) allows for better utilization of the spectral bandwidth. Photonic crystals (PhCs) exhibit photonic bandgap (PBG) due to the periodic variation of the dielectric constant and photons with a range of frequencies within the PBG cannot travel through the crystal. By introducing defects into PhCs, it is possible to control the light propagation along certain paths.
In this thesis, the characteristics of coupled cavity waveguides (CCWs) and drop filter are discussed. Then we propose a multi-channel WDM system based on CCWs. It can be applied in FTTH to filter the wavelengths of 1310, 1490 and 1550 nm in different CCWs and also can make the bandwidth of output wavelength become narrow to filter more wavelengths. In addition, by modulating the size of the resonator on the PhCs, it can drop the particular wavelength into the waveguide. Finally, we proposed a multi-channel drop filter with FHWM 0.8 nm. This device design is leading the way to achieve CWDM specification with 100% drop efficiency, high quality factor and almost no crosstalk. The operations of such an ultra-compact demultiplexer and drop filter based on PhCs are suitable to be used in WDM optical communication systems.
|
Page generated in 0.049 seconds