Eukaryotic genomes are densely compacted into chromatin, so that they can be contained in the nucleus. Despite the tight packaging genes need to be accessible for normal metabolic activities to occur, such as transcription, repair and replication. These processes are regulated by a vast number of proteins but also by the level of compaction of chromatin. The translocation of motor proteins along DNA produces torsional stress which in turn alters chromatin compaction both upstream and downstream. Few single-molecule studies have investigated the behaviour of nucleosomes when subjected to torsion. The inability to measure the applied torque though represented a major limitation to those reports. The implementation of the rotor bead assay, which allows to directly measure the torque applied in magnetic tweezers experiments, has been hindered by a difficult sample preparation procedure. In order to overcome this limitation an efficient protocol for the insertion of chemical or structural modifications in long DNA substrates was developed. This was then further expanded to allow the introduction of labels in multiple loci and/or both strands and has been used successfully in a number of studies. Furthermore this is the first report of tensile experiments performed on nucleosomes with a histone variant. H2AvD nucleosomes were studied due to the interest in the biological role of H2A.Z-family proteins. Interestingly, the variant nucleosomes appear to bind less DNA and to be evicted from the DNA at lower forces than those observed for canonical nucleosomes. These findings show an important role for the H2A-H2B dimers in the mechanical stability of nucleosomes. Furthermore these results are in agreement with recently proposed models of a dynamic nucleosome, in contrast to the long-standing view of nucleosomes as static structures.

Eukaryotic genomes are densely compacted into chromatin, so that they can be contained in the nucleus. Despite the tight packaging genes need to be accessible for normal metabolic activities to occur, such as transcription, repair and replication. These processes are regulated by a vast number of proteins but also by the level of compaction of chromatin. The translocation of motor proteins along DNA produces torsional stress which in turn alters chromatin compaction both upstream and downstream. Few single-molecule studies have investigated the behaviour of nucleosomes when subjected to torsion. The inability to measure the applied torque though represented a major limitation to those reports. The implementation of the rotor bead assay, which allows to directly measure the torque applied in magnetic tweezers experiments, has been hindered by a difficult sample preparation procedure. In order to overcome this limitation an efficient protocol for the insertion of chemical or structural modifications in long DNA substrates was developed. This was then further expanded to allow the introduction of labels in multiple loci and/or both strands and has been used successfully in a number of studies. Furthermore this is the first report of tensile experiments performed on nucleosomes with a histone variant. H2AvD nucleosomes were studied due to the interest in the biological role of H2A.Z-family proteins. Interestingly, the variant nucleosomes appear to bind less DNA and to be evicted from the DNA at lower forces than those observed for canonical nucleosomes. These findings show an important role for the H2A-H2B dimers in the mechanical stability of nucleosomes. Furthermore these results are in agreement with recently proposed models of a dynamic nucleosome, in contrast to the long-standing view of nucleosomes as static structures.:Abstract Table of contents 1 Introduction 1.1 The transforming principle 1.2 Chromatin 1.2.1 Nucleosomes 1.2.2 The 30 nm fibre: a mirage? 1.2.3 Histone code 1.3 Histone variant H2A.Z 1.3.1 H2A.Z and transcription 1.4 Single molecule studies of chromatin 1.4.1 Chromatin under tension 1.4.2 Open nucleosome 1.4.3 Twisted chromatin 1.5 Single molecule techniques 1.5.1 Atomic force microscopy 1.5.2 Foerster resonance energy transfer 1.5.3 Magnetic tweezers 1.5.4 Worm-like chain model 2 Aims of the project 3 Cut and paste method for internal DNA labelling 3.1 Introduction 3.2 Experimental design 3.3 Results 3.3.1 Sequence design and cloning 3.3.2 Labelling and religation efficiency 3.3.3 Structural modifications 3.3.4 Labelling of multiple loci 3.3.5 Opposite-strand labelling 3.4 Discussion 4 Reconstituting chromatin 4.1 Long array of NPSs 4.1.1 Polymer physics applied to molecular cloning 4.1.2 Preventing homologous recombination 4.2 Expression and purification of histone proteins 4.2.1 Protein expression 4.2.2 Inclusions bodies 4.2.3 Histone purification 4.2.4 Octamer reconstitution and isolation 4.2.5 H2AvD 4.3 Reconstitution of nucleosomal arrays and biochemical analysis 4.3.1 Reconstitution procedure 4.3.2 Biochemical analysis 4.4 Tweezers construct with nucleosomes 5 Eviction of nucleosomes 5.1 Nucleosome eviction 5.1.1 A two-stage process 5.1.2 Chromatin fibres 5.1.3 Reassembly of nucleosomes 5.1.4 Distinct populations within nucleosome eviction events 5.1.5 Nicked and supercoilable nucleosomal arrays 5.2 Eviction of H2AvD-nucleosomes 5.2.1 H2AvD-nucleosomes bind less inner turn DNA 5.2.2 H2AvD-nucleosomes evict at lower forces 5.2.3 Likelihood of nucleosome reassembly 5.2.4 Gradual weakening of nucleosomes 5.2.5 Analysis software NucleoStep 5.3 Towards a rotor-bead assay on chromatin 5.4 Discussion 5.4.1 Nucleosome eviction in two stages 5.4.2 The fate of dimers in single molecule experiments 5.4.3 Structural origin and biological relevance of the mechanical properties of H2AvD-nucleosomal core particles 5.4.4 Monolithic or dynamic nucleosomes 6 Conclusions Bibliography Appendix 6.1 Internal labelling Procedure 6.1.1 Cloning 6.1.2 Nicking & cutting 6.1.3 The replace reaction 6.1.4 Purification 6.1.5 Ligation (optional) 6.1.6 Opposite strand labelling 6.1.7 Assessing the results of the labelling reaction 6.2 Chromatin reconstitution 6.2.1 Long array of NPSs 6.2.2 Expression and purification of histone proteins 6.2.3 Reconstitution of nucleosomal arrays and biochemical characterization 6.2.4 Simple Phenol:chloroform isolation of DNA 6.3 Magnetic tweezers experiments 6.3.1 Flow cell assembly 6.3.2 Functionalization of flow cells 6.3.3 Magnetic tweezers and rotor bead measurements 6.3.4 Force calibration List of Figures List of Tables List of publications Acknowledgements Declaration of originality

Haloferax volcanii est une archée appartenant au phylum euryarchaeota et à la classe des Halobacteriales. Les mécanismes liés à la réplication et à la réparation chez les archées sont très similaires à ceux rencontrés chez les eucaryotes, faisant d’H. volcanii un des organismes modèle pour l’étude de la réplication et de la biologie des archées, notamment car de nombreux outils génétiques sont disponibles chez cet organisme. De plus, H. volcanii possède la particularité de pouvoir avoir toutes ses origines de réplication supprimées, soulevant beaucoup de questions sur les mécanismes impliqués. Plusieurs hypothèses ont été émises sur la façon dont cette souche initie sa réplication, basées soit sur la dérivation des mécanismes liés à la réparation de l’ADN, soit sur un mécanisme d’initiation de la réplication indépendant des origines. Afin d’étudier ces mécanismes liés à la réplication, j’ai construit une souche d’H. volcanii capable d’incorporer des analogues de la thymidine dans l’ADN lors de sa synthèse grâce à la délétion de gènes impliqués dans la voie de biosynthèse de la thymidine. Des temps de cultures courts de la souche en présence d’un analogue permet son incorporation au niveau des zones actives de réplication pour marquer spécifiquement l’ADN néosynthétisé. L’immunodétection de l’analogue incorporé à l’ADN, en travaillant en cellule entière avec un microscope à fluorescence, permet la localisation de l’ADN néosynthétisé, reflétant ainsi les régions où la réplication est active. Ces analyses révèlent majoritairement 2 à 3 régions de réplication actives dans des cellules en prolifération, sans localisation particulière. Ces régions ont déjà été observées en étudiant la localisation d’une protéine clé de la réplication (RPA2) fusionnée à la protéine verte fluorescente GFP, confirmant sa localisation aux zones actives de réplication. Une étonnante variabilité observée d’une cellule à l’autre et suggère une initiation probabiliste de la réplication. Il est également étonnant de n’observer qu’aussi peu de zones actives de réplication, comparé au fort taux de polyploïdie de cette souche. Se pose alors la question de ce à quoi correspondent ces zones de réplication. Pour cela, j’ai développé chez H. volcanii la technique de peignage moléculaire permettant d’isoler des molécules individuelles d’ADN et révéler spécifiquement les analogues incorporés pour pouvoir déterminer le nombre de copies du chromosome qui sont actives lors de la réplication, ainsi que le nombre d’origines actives sur chacune des copies. J’ai également développé une technique de Time-lapse dans le but de suivre ces régions au cours du temps en observant les divisions cellulaires directement sous le microscope. / Haloferax volcanii is an archaea belonging to the phylum euryarchaeota and the class Halobacteriales. The mechanisms related to replication and repair in archaea are very similar to those found in eukaryotes, making H. volcanii a relevant model organisms for the study of replication and archaeal biology, especially since many genetic tools are available. Interestingly, all replication origins can be removed from the chromosome of H. volcanii, raising many questions about the mechanisms involved. Several hypotheses have been proposed on how this strain initiates its replication, either relying on recombination-dependent replication initiation or an origin-independent mechanism. In order to study these replication-related mechanisms, I have constructed a strain of H. volcanii able to incorporate thymidine analogues into DNA during its synthesis by deleting genes involved in the thymidine biosynthesis pathway. A short-time cultures of the strain in the presence of an analogue allows its incorporation in nascent DNA. By immunodetection of the analog coupled to fluorescence microscopy observation of whole cells, it is possible to investigate the localization of neosynthesized DNA,which reflect the regions where replication is active. These analyses revealed mainly 2 to 3 active replication regions per cell, without any particular location. These regions had already been observed by studying the localization of a key replication protein (RPA2) fused to the fluorescent green protein GFP, confirming its location in active replication areas. A surprising variability in the number of replication foci from one cell to another was observed, suggesting a probabilistic initiation of replication. It is also surprising to observe so few active replication areas compared to the high polyploidy of this strain. This raises the question of what these replication areas correspond to. For further understanding, I developed for H. volcanii molecular combing, to isolate individual DNA molecules and specifically reveal incorporated analogues to determine the number of copies of the chromosome that are being replicated, as well as the number of active origins on each of the copies. I have also developed time-lapse approach to track these regions over time by monitoring cell proliferation directly under the microscope.

Les nanoparticules de silice sont des plateformes idéales pour la conception d’outils de bioimagerie afin d’étudier les mécanismes de transfert de gènes par des lipoplexes. L’objectif de notre étude est le développement d’une modification chimique de surface permettant d’obtenir des colloïdes de silice chargés positivement susceptible de lier de l’ADN par des interactions électrostatiques. Deux stratégies pour la génération de groupements ammonium quaternaires sur des nanoparticules de silice sont présentées a) une silanisation directe par l’utilisation d’un agent de couplage silanique contenant un groupement ammonium quaternaire et b) un procédé en deux étapes mettant en jeu une modification de surface chimique par des aminosilanes primaires et secondaires suivie d’une alkylation des amines par l’iodomethane. Différentes méthodes physico-chimiques (essais de cosédimentation, des expériences de microbalance à cristal de quartz avec mesure de dissipation et d’imagerie MET et Cryo-MET) ont été utilisées pour mettre en évidence et caractériser les interactions entre les biomolécules et les surfaces quaternisées. Des études préliminaires ont montrées les capacités de marquage de lipoplexes par de telles nanoparticules. / Silica nanoparticles are ideal platforms for the conception of bioimaging tools serving for the elucidation of the mechanisms of gene transfection via lipoplex structures. The purpose of the present study is the development of a chemical surface modification for the generation of quaternary ammonium groups on silica nanoparticles permitting the obtainment of highly positively charged silica colloids which strongly attract DNA by electrostatic interactions. Two modification strategies to generate quaternary ammonium groups on silica are presented a) a direct silanization using quaternary ammonium groups containing silane derivatives and b) a modification of silica nanoparticles via a first modification with an amine group containing silane derivative and a subsequent quaternization of the amine groups via an alkylation with iodomethane. Different physicochemical methods were employed (cosedimentation assays, quartz crystal microbalance with dissipation monitoring measurements, TEM and Cryo-TEM imaging) to analyze interactions between quaternized surfaces, DNA and lipids. A preliminary study was carried out which shows the capacity of the synthesized nanoparticles to label DNA in lipoplexes.