No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

In this thesis, PN simulations of drying are compared with experimentally obtained data fromdrying of a representative 2D microfluidic network in SiO2 under varying thermal conditions withthe aim to identify governing physical pore scale effects. Gravity and viscous effects aredisregarded in this thesis. Instead drying with slight local temperature variation and drying withimposed thermal gradients are studied. Based on this investigation, a powerful non-isothermalPNM is developed. This model incorporates i) the phenomena associated with the temperaturedependency of pore scale invasion, namely thermally affected capillary invasion and vapor flow aswell as ii) the secondary effects induced by wetting liquid films of different morphology. This studyclearly evidences that the macroscopic drying behavior is fundamentally dictated by thetemperature gradient imposed on the PN and moreover by the secondary capillary invasion aswell. In agreement with literature, invasion patterns as in invasion percolation with progressiveevaporation of single clusters are observed in drying with negligible local temperature variation;gradients with temperature decreasing from the surface (negative temperature gradient) canstabilize the drying front, evolving between the invading gas phase and the receding liquid phase,whereas temperature increasing from the surface (positive temperature gradient) leads todestabilization of the liquid phase with early breakthrough of a gas branch and initiation of asecond invasion front migrating in opposite direction to the evaporation front receding from theopen surface of the PN. Special attention is paid on the distinct drying regimes found in thesituation of a positive gradient because they are associated with different pore scale invasionprocesses. More precisely, temperature dependency of surface tension dictates the order ofinvasion as long as the liquid phase is connected in a main liquid cluster (usually found during thefirst period of drying). In contrast to this, detailed study of the vapor transfer mechanismsemphasizes that vapor diffusion through the partially saturated region can control the pore leveldistributions of liquid and gas phase during the period of drying when the liquid phase isdisconnected into small clusters. This is also related to the cluster growth induced by partialcondensation of vapor. It is shown and discussed in detail in this thesis that this effect not onlydepends on direction and height of the temperature gradient for a given pore size distribution butthat moreover the overall evaporation rate influences the cluster growth mechanism. This indicatesthat liquid migration during drying of porous media might be controlled by the interplay of thermalgradients and drying rate. In summary, the study of thermally affected drying of the 2-dimensionalPN reveals complex pore scale mechanisms, usually also expected in drying of real porous media.This leads to the development of a strong mathematical pore scale model based on experimentalfindings. It is demonstrated how this model might be applied to understand and develop moderndrying processes based on the simulation of thermally affected pore scale mass transfer

A Chamomilla recutita L. é uma das plantas medicinais mais cultivadas no Brasil e no mundo. Os extratos da C. recutita são de interesse para as indústrias farmacêuticas e cosméticas, visto que estes apresentam atividades anti-inflamatória, antioxidante e adstringente. A ação terapêutica do extrato pode ser mais pronunciada que a ação terapêutica de um de seus ativos isolados. No entanto, a incorporação de um extrato em uma formulação pode ser difícil devido à baixa estabilidade dos extratos, bem como à possibilidade de gerarem instabilidade das formulações. Microencapsulando o extrato com um carreador é possível aumentar estabilidade do extrato quanto evitar instabilidade na formulação. Além disso, a microencapsulação é capaz de fornecer outras vantagens, como uma liberação controlada. Dois processos foram estudados como alternativas para a microencapsulação do óleo essencial e do extrato hidroalcoólico da C. recutita usando quitosana como carreador: o spray drying e o spray freeze drying. Planejamentos fatorais foram utilizados para determinar os fatores que mais influenciaram no diâmetro médio das micropartículas, eficiência de encapsulação e teor dos marcadores e rendimento do processo. A apigenina e a apigenina-7-glicosídeo foram usadas como marcadores do extrato hidroalcoólico e o óxido de bisabolol A foi usado como marcador do óleo essencial. Os processos de spray drying e spray freeze drying dos dois extratos foram otimizados e as micropartículas resultantes foram caracterizadas com relação ao diâmetro médio, rendimento do processo, teor e eficiência de encapsulação dos marcadores, atividade antioxidante in vitro, densidade, índice de Carr, fator de Hausner, umidade, morfologia, perfil de liberação n vitro e estabilidade. Os resultados mostraram que o processo de spray drying apresentou os melhores resultados para eficiência de encapsulação, com valores de aproximadamente 98%, 95% e 80% para apigenina, apigenina-7-glicosídeo e óxido de bisabolol A, respectivamente. As eficiências de encapsulação obtidas no processo de spray freeze drying foram de aproximadamente 59%, 58% e 38% para os mesmos marcadores, respectivamente. As micropartículas produzidas por spray freeze drying apresentaram formato irregular e poroso, enquanto as produzidas por spray drying apresentaram formato esférico e superfícies mais lisas, sem poros ou fissuras. Ao contrário do que ocorreu com o extrato hidroalcoólico, a perda do marcador do óleo foi elevada no processo de spray drying, com teor final de 35%. Os teores dos marcadores ficaram acima de 80% para o processo de spray freeze drying do óleo e acima de 90% para o extrato hidroalcoólico. As micropartículas produzidas por spray drying do extrato hidroalcoólico e do óleo e por spray freeze drying do extrato hidroalcoólico e do óleo apresentaram diâmetro médio de 5,1 ?m, 5,0 ?m, 31,0 ?m e 96,4 ?m, respectivamente. Ensaios de liberação in vitro mostraram que as micropartículas foram capazes de sustentar a liberação dos respectivos marcadores. Os estudos de permeação in vitro das micropartículas produzidas por spray drying do extrato hidroalcoólico também mostraram que estas foram capazes de sustentar a liberação. A microencapsulação proporcionou em todos os casos um aumento considerável da estabilidade. As micropartículas produzidas por spray drying do extrato hidroalcoólico apresentaram teores de marcadores no mínimo 50% maiores que o extrato puro após 90 dias. O spray freeze drying se mostrou como a melhor alternativa para produção de micropartículas de quitosana contendo o óleo essencial de C. recutita, enquanto o processo de spray drying se mostrou como uma ótima alternativa para microencapsulação do extrato hidroalcoólico da C. recutita. / Chamomilla recutita L. is one of the most cultivated medicinal plants in Brazil and around the world. Its extracts are important to both the pharmaceutical and cosmetics industries due to its therapeutic applications, such as an anti-inflammatory, antioxidant, and astringent. The therapeutic effects of an extract may be more pronounced than those of an isolated active compound. However, the incorporation of an extract in a formulation is difficult due to the low stability of extracts and the potential instabilities they may cause in formulations. Microencapsulating an extract in a carrier is a potential way of increasing the stability of an extract and avoiding instabilities in a formulation. Compound microencapsulation also brings other advantages, such as controlled release rates. Two processes were studied as alternatives to microencapsulating C. recutita essential oil and C. recutita hydroalcoholic extract using chitosan as a carrier: spray drying and spray freeze drying. Factorial designs were used to determine which process factors most influence the mean diameter, encapsulation efficiency and content of the chemical markers, and process yield. Apigenin and apigenin-7-glucoside were used as chemical markers for the hydroalcoholic extract and bisabolol oxide A was used as the chemical marker for the essential oil. The spray drying and spray freeze drying processes for both the oil and hydroalcoholic extract were optimized and the resulting microparticles were further characterized to determine mean diameter, process yield, marker encapsulation efficiency and content, in vitro antioxidant activity, density, Carr index, Hausner factor, water content, morphology, in vitro release profiles and stability. The results showed spray drying had the best encapsulation efficiency results, with about 98%, 95% e 80% of the apigenin, apigenin-7-glucoside and bisabolol oxide A content, respectively, inside the microparticles. The encapsulation efficiencies obtained in the spray freeze drying process were about 59%, 58% e 38% for the same chemical markers, respectively. Microparticles produced by spray freeze drying were irregular and porous, whereas microparticles produced by spray drying were spherical and fairly smooth, without porous or cracks. Contrary to what happened with the hydroalcoholic extract, oil marker content was low for spray dried microparticles, with final content at 35%. Chemical markers contents were above 80% for the oil and above 90% for the hydroalcoholic extract in spray freeze dried microparticles. Spray dried microparticles containing extract and oil and spray freeze dried microparticles containing extract and oil had mean diameter of 5.1 ?m, 5.0 ?m, 31.0 ?m and 96.4 ?m, respectively. In vitro release profiles showed all microparticles were able to sustain their respective marker release rates. In vitro permeation studies of spray dried microparticles containing hydroalcooholic extract also showed sustained release rates for the corresponding markers. Microencapsulation also provided considerable increase in C. recutita hydroalcoholic extract stability and C. recutita essential oil stability. After 90 days spray dried microparticles containing hydroalcoholic extract presented marker content 50% higher than the pure hydroalcoholic extract. Spray freeze drying was the best alternative to produce chitosan microparticles containing C. recutita essential oil, while spray drying was shown to be an excellent way to microencapsulate C. recutita hydroalcoholic extract in chitosan.

Biosolids Drying is the process of producing a fertilizer product for beneficial reuse from solids produced during municipal wastewater treatment. The drying of biosolids involves the evaporation of water to stabilize the material and produce a product for beneficial use. Thermal energy needs to be transferred to the biosolids to evaporate the water and heat the solids. Energy can be provided by combustion of fuels, re-use of waste heat or solar radiation (WEF, 2014). The most common technology for biosolids drying in the United States utilizes rotary drum dryers. In these systems, fines and crushed oversized pellets produced during the drying system are mixed with dewatered biosolids upstream of the dryer to create a 55% - 65% dry biosolid in the form of pellets. Reducing the percentage of fines generated during the drying process can potentially reduce the amount of energy required for drying. In earlier research completed by Zhang (2018) it was shown that energy modifying amendments, specifically cationic polyelectrolytes, can reduce the zeta potential of biosolids in solution and possibly promote aggregation of the fines. One of the tested amendments, polydiallyldimethylammonium chloride (PDADMAC), was also shown to increase the particle size of the biosolids in solution. In this work, a bench scale drying system was designed and developed to apply the polyelectrolyte amendments to biosolids during the mixing phase, and to gauge the impact on the pellet size distribution and the percentage of fines generated after drying. It was shown that PDADMAC, which is a high charge density cationic polyelectrolyte, had a measurable, though inconsistent, impact on pellet size when applied during the mixing phase. This work also highlights the varying characteristics of biosolids and the recycled biosolids produced during the drying process. Both PDADMAC, and polyallyamine, another cationic polyelectrolyte, when applied to biosolids during the mixing phase limited the increase in fines production as the mixing time was increased prior to drying.

Digitized by Kansas Correctional Industries