The main goal of the masters project is to design a dual band antenna for receiving DVB-T signal in the area of the city of Brno. The antenna will be designed and detaily adjusted for receiving multiplex 1 and 3, exactly for frequencies of 538 MHz and 778 MHz. The designed antenna will be deeply tested in 4nec2 and CST Microwave Studio programs.

The extensive industrialization and human expansion has caused environmental protection wildlife conservation to become paramount concerns of the 21st century. The ecosystems of oceans and seas have particularly been affected due to activities like oil spills and increased fishing. This has led to a growing interest in monitoring of the oceans and marine animals to detect signs of distress in aquatic species. However, acquisition of data from oceans to land has been a challenging and expensive task. The concept of Internet of Sea provides a solution to this data transfer between the ocean nodes, like animal tags or deployed floating transceivers, and our land Internet, and can potentially eliminate the need of expensive monitoring ships or underwater cables. The Internet of Sea is system that comprises of sensor nodes in the form of detachable marine animal tags as the data acquisition platforms and distributed floating transceivers as the intermedium nodes which then transfer the data to the base-stations located on lands. The data acquired by animal tags are first to be stored in the tag, and once the tag comes to the sea surface, the data is transferred to the nearby floating transceivers. The floating transceivers have multi- hopping capability so the data can be passed to the land base-stations through a small number of transceivers. Due to the specific geometric shapes and size constraints of the tag and floating transceivers, as well as the harsh ocean environment, novel integrated antennas are required for this type of system. In this thesis, we propose several antenna designs suitable for Internet of Sea applications. The first design is a quasi-isotropic Antenna in Package (AiP), operating in the Bluetooth band, which has been designed for semi-real-time monitoring. Secondly, a large frequency-ratio dual- band microstrip antenna array, working at Extended Global System for Mobile communications (E-GSM900), Long Range (LoRa), and Bluetooth bands, has been designed for large-area wireless communication. Lastly, a circularly polarized microstrip antenna array has also been designed for Global Positioning System (GPS). Throughout the work, the measured results are consistent with the design strategies and simulation results.

Although small spacecraft are small in size and light in weight compared to the conventional satellites, they can offer lots of possibilities for space exploration, scientific observation, data collection and telecommunication. Also, they cost a lot less money than the conventional satellites, and the scientific missions can be planned in a relatively short period of time by using the COTS (Commercial Off-The-Shelf) materials. However, there is a big challenge for the small spacecraft that is the limited surface area of the small spacecraft and the outnumbered components to be mounted on the surface of the small spacecraft. The most obvious one is that the competition for the limited real estate between the antenna and solar cells. UAVs, also known as drones, have become so popular that it is not only used for military and scientific applications, but also they are available for recreational use for ordinary people. Although they are getting smaller in size so that one can put them in his pocket or on his palm, they are becoming multifunctional, which requires more sensors to be mounted on the surface of the drone to achieve its multifunctionality. For example, a recreational drone can not only take pictures and videos, but also it can transmit the picture or video in real time to the operator, which needs a camera to take the picture or videos and needs an antenna to transmit the recorded data to the operator. This requires that the limited surface area needs to be efficiently used in order to accommodate the multiple needed components. This thesis presented a faster, better and cheaper way of inkjet printing conformal antennas on the cover glass of the solar cells of the small spacecraft or on the wing or other parts of the UAV body to integrate the antenna with the solar panels of the CubeSats or with or directly printing the antenna on the UAV body to efficiently use the limited real estate. Several meshed and solid patch antennas printed on a space certified AF32 glass substrate using the printing procedure outlined in this thesis and measured to verify the effectiveness of the inkjet printing procedures. A high gain reflectarray with optical transparency of 95% was inkjet printed on space certified AF32 glass and BOROFLOAT glass and measured to verify the antenna performance and solar panel efficiency. Measurement results showed that the inkjet printed reflectarray integrated on top of the solar panel has a gain of 21.5 dB. The solar panel efficiency was dropped by around 6% due to the inkjet printed reflectarray on glass. A simple conformal dual-band antenna for UAV application was designed with ANSYS HFSS and fabricated in the lab using a foam substrate. The measured antenna performances agreed well with the simulation results. This dual-band antenna also can be inkjet printed directly on the wing or other parts of the UAVs using the printing techniques discussed in this thesis.

Yes / This paper describes a hybrid computational method which efficiently models the interaction between a small antenna placed in proximity with the human body. Results for several test cases of placed in different locations on the body are presented and discussed. The near and far fields were incorporated into the study to provide a full understanding of the impact on human tissue. The cumulative distribution function of the radiation efficiency and absorbed power is also provided. The antennas are assumed to be operating over the 2.4 GHz and 5.2 GHz WLAN frequencies.

With the increasing demand on wireless and portable devices, the radio frequency front end blocks are required to feature properties such as wideband, high frequency, multiple operating frequencies, low cost and compact size. However, the current radio frequency system blocks are designed by combining several individual frequency band blocks into one functional block, which increase the cost and size of devices. To address these issues, it is important to develop novel approaches to further advance the current design methodologies in both space and spectrum domains. In recent years, the concept of artificial materials has been proposed and studied intensively in RF/Microwave, Terahertz, and optical frequency range. It is a combination of conventional materials such as air, wood, metal and plastic. It can achieve the material properties that have not been found in nature. Therefore, the artificial material (i.e. meta-materials) provides design freedoms to control both the spectrum performance and geometrical structures of radio frequency front end blocks and other high frequency systems. In this dissertation, several artificial materials are proposed and designed by different methods, and their applications to different high frequency components and circuits are studied. First, quasi-conformal mapping (QCM) method is applied to design plasmonic wave-adapters and couplers working at the optical frequency range. Second, inverse QCM method is proposed to implement flattened Luneburg lens antennas and parabolic antennas in the microwave range. Third, a dual-band compact directional coupler is realized by applying artificial transmission lines. In addition, a fully symmetrical coupler with artificial lumped element structure is also implemented. Finally, a tunable on-chip inductor, compact CMOS transmission lines, and metamaterial-based interconnects are proposed using artificial metal structures. All the proposed designs are simulated in full-wave 3D electromagnetic solvers, and the measurement results agree well with the simulation results. These artificial material-based novel design methodologies pave the way toward next generation high frequency circuit, component, and system design.

Yes / A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed for millimeter-wave communication systems in this paper. The multiple-input-multiple-output (MIMO) antenna geometry consists of a slotted ellipse enclosed within a hollow circle which is orthogonally rotated with a connected partial ground at the back. The overall size of the four elements MIMO antenna is 2.24λ × 2.24λ (at 27.12 GHz). The prototype of four-element MIMO resonator is designed and printed using Rogers RT Duroid 5880 with εr = 2.2 and loss tangent = 0.0009 and having a thickness of 0.8 mm. It covers dual-band having a fractional bandwidth of 15.7% (27.12–31.34 GHz) and 4.2% (37.21–38.81 GHz) for millimeter-wave applications with a gain of more than 4 dBi at both bands. The proposed antenna analysis in terms of MIMO diversity parameters (Envelope Correlation Coefficient (ECC) and Diversity Gain (DG)) is also carried out. The experimental result in terms of reflection coefficient, radiation pattern, gain and MIMO diversity parameter correlates very well with the simulated ones that show the potential of the proposed design for MIMO applications at millimeter-wave frequencies. / This work is supported by the Moore4Medical Project, funded within ECSEL JU in collaboration with the EU H2020 Framework Programme (H2020/2014-2020) under Grant Agreement H2020-ECSEL-2019-IA-876190, and Fundação para a Ciência e Tecnologia (ECSEL/0006/2019). This work is also funded by the FCT/MEC through national funds and when applicable co-financed by the ERDF, under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 Project.

In retrospect we can see that from the last century, wireless electronic technology has been in a rapid state of development. With the popularity of wireless communication, the power amplifier demand is rising. In general, magnitude, maximum noise figure, minimum noise figure, efficiency, and output power are important indicators of the amplifier. The IC industry is exploring how to reduce the additional cost and improve the high-frequency performance. Therefore, designing a strong adaptability and high cost performance of the PA has become a priority. As these technologies advance, the power amplifiers need to have better integration, lower cost, and lower power dissipation. Also, some special requirements are being asked in some areas, such as multi-mode and multi-band. In general, people have to use several power amplifiers parallel to frame a multifunction chip. Each of them working at different frequencies of interest has to have separate matching network, design, and area; also, the diversity amplifier prices will increase with the number of amplifiers, and its cost is also changed. In this thesis, because Class E power amplifier has lower power dissipation, 100% ideal efficiency, simple circuit structure, and strong applicability, the Class E is used as power amplifier in main stage. Moreover, in order to decrease input power and increase output power, the class A power amplifier is used as driver stage. It can use very small amount of power to provide a larger power. Moreover, we use a switched variable inductor and capacitor to constitute a dual band matching network which can let the PA work at more than one frequency. In fact, we design a Class A PA which is as a driver stage. Then, when we support 1 dBm input power, the driver stage can have 8 dBm output power. Also the output will be the input power for the main stage. When the Class E PA get 8dBm input power, it will export a 15dBm output power. Because the dual band matching network, the PA can work at 2.2 GHz and 2.6 GHz; also, the efficiency is 48% and 51%, and the both gains are 13 dB. In the future, in order to further improve the performance of the power amplifier and better multi-frequencies, more new designs with new structures should be investigated. Moreover, we need further research about design theory. In fact multi-frequencies power amplifier has a great potential in real application. It based on its special structure and design parameters.

Le medium sans fil est une ressource partagée et limitée. Les normes sans fil actuelles partagent toujours le principe de partage du medium Half-Duplex: la transmission et la réception de signaux sont effectuées dans deux intervalles de temps distincts ou deux bandes de fréquences différentes. En outre, l'émetteur-récepteur ne peut émettre et recevoir qu’un signal à la fois. Cette thèse suit une autre approche: au lieu de partager le support avec le principe de Half-Duplex, toute la bande de fréquence autorisée est partagé pour la transmission et la réception simultanée, approche qui est appelée Full-Duplex. Dès lors, on peut concevoir une architecture d'un émetteur-récepteur radio flexible à large bande pour traiter deux types de signaux différents à la fois. Pour approcher cet objectif, nous utilisons une méthode de suppression active analogique de l’auto-interférence (AARFSIC) et l'annulation active numérique d'auto interférence dans le domaine temporel (ADSICT) pour annuler la forte auto-interférence (SI) induite par le principe Full-Duplex. Basé sur la radio Full-Duplex, nous proposons un système flexible Dual-Band (FDDB) émetteur-récepteur radio OFDM-Full Duplex en la combinant avec un front-end RF double bande. S'appuyant sur ces principes, nous exposons trois contributions principales: Nous présentons une technique d’annulation analogique de l’auto-interférence (ASIC), qui peut annuler complètement l’auto-interférence à trajet direct ou multi-trajets, basée sur la combinaison des méthodes AARFSIC et DSICT. Ensuite, nous présentons la conception et l'évaluation d'une radio OFDM Full-Duplex, y compris l'analyse et la qualification de l'impact du bruit thermique et du bruit de phase sur les performances du système. Enfin, nous développons une radio dual-bande FDDB OFDM qui peut fonctionner sur deux fragments de spectre séparés. Afin d'éliminer l'impact du déséquilibre I/Q sur la radio FDDB, une méthode d’estimation des déséquilibres I/Q et de compensation, simple mais efficace, est présentée. La simulation au niveau système menée avec ADS et Matlab montre que cette méthode peut effectivement compenser des déséquilibres I/Q aussi bien élevés que faibles. / The wireless medium is a shared and limited resource. Current wireless standards always share the medium with Half-Duplex principle: the transmission and reception of signals are done in two separate time slots or two different frequency bands. Besides, the transceiver can only transmit and receive one signal at a time. This dissertation takes an alternate approach: Instead of sharing the medium with Half-Duplex principle, the entire licensed frequency band is shared for simultaneous transmission and reception, which we call Full-Duplex. Besides, the design concept for a wideband flexible radio transceiver can process two different types of signals at a time. To approach this goal, we use an active analog radio frequency self-interference cancellation (AARFSIC) method or a combination scheme of the AARFSIC and active digital self interference cancellation in time domain (ADSICT) to cancel the strong self-interference (SI) induced by the Full-Duplex principle. Based on the Full-Duplex radio, we propose a flexible Full-Duplex Dual-Band (FDDB) OFDM radio transceiver by combining it with a Dual-Band RF front-end. Building on these, we make three main contributions: We present an active self-interference cancellation (ASIC) scheme, which can cancel both the strong one-path and multi-path SI completely, based on the combination of the AARFSIC and DSICT. Next, we introduce the design and evaluation of a Full-Duplex OFDM radio, including the analysis and qualification of the impact of the thermal noise and phase noise on the system performance. Finally, we develop a FDDB OFDM radio that can work on two separate spectrum fragments. In order to eliminate the impact of the I/Q imbalance on the FDDB radio, a simple but practical digital I/Q imbalance estimation and compensation method is presented. The system level simulation conducted with ADS and Matlab software shows that this method can effectively compensate both high and low I/Q imbalance.

Este trabalho visou ao desenvolvimento de antenas de ressoador dielétrico de banda dupla em frequências de micro-ondas por meio do estabelecimento de uma metodologia de projeto para as mesmas e da proposição de configurações inéditas de antenas desse tipo. Estudos realizados sobre antenas de ressoador dielétrico e sobre suas técnicas de projeto forneceram a base para a elaboração de um procedimento de projeto para antenas de banda dupla que explora a flexibilidade das antenas de ressoador dielétrico. Empregando-se esse procedimento de projeto, duas antenas com configurações originais foram desenvolvidas para operar em frequências de micro-ondas. Uma delas é uma antena de ressoador dielétrico cilíndrica sobre plano de terra, destinada a operar nas frequências centrais de 3,94 GHz e de 5,42 GHz, com diagrama de radiação direcional e polarização circular na primeira banda de operação e com diagrama de radiação omnidirecional e polarização linear na segunda. A outra antena consiste em uma antena de ressoador dielétrico cilíndrica sobre substrato dielétrico aterrado, cujas frequências centrais de operação são 3,99 GHz e 6,20 GHz, com diagrama de radiação direcional e polarização circular em ambas as bandas de operação. O projeto das duas antenas também levou a contribuições novas adicionais em alguns temas específicos relacionados: estruturas de excitação para antenas de ressoador dielétrico, circuitos acopladores híbridos de 90° de banda dupla, circuitos de alimentação para antenas de banda dupla e modelos matemáticos para o ressoador dielétrico cilíndrico isolado no espaço livre. Os comportamentos previstos teoricamente para as antenas projetadas são confirmados por meio de resultados obtidos por simulação eletromagnética e por medição experimental, o que indica a validade das hipóteses adotadas, das configurações de antena propostas e da metodologia de projeto concebida, demonstrando também a flexibilidade desta para variadas especificações de antena. Os avanços obtidos com este trabalho e as melhorias que podem ser efetuadas sobre o mesmo são identificados examinando-se resultados recentemente publicados na literatura técnica. Este trabalho foi realizado na forma de uma pesquisa de doutorado sanduíche, desenvolvida parcialmente na University of Houston sob a supervisão do Prof. Stuart A. Long. / This work aimed at the development of microwave dual-band dielectric resonator antennas by means of establishing a design methodology for them and of proposing novel configurations of this antenna type. Studies on dielectric resonator antennas and on their design techniques provided the ground for elaborating a design procedure for dual-band antennas that exploits the flexibility of dielectric resonator antennas. By employing this design procedure, two antennas with original configurations have been developed for operation at microwave frequencies. One of them is a cylindrical dielectric resonator antenna on a ground plane, intended for operation at the center frequencies of 3.94 GHz and 5.42 GHz, with a directional radiation pattern and circular polarization in the first operating band and with an omnidirectional radiation pattern and linear polarization in the second one. The other antenna consists of a cylindrical dielectric resonator antenna on a grounded dielectric substrate, whose operating center frequencies are 3.99 GHz and 6.20 GHz, with a directional radiation pattern and circular polarization in both operating bands. The design of the two antennas also led to additional new contributions in some related specific subjects: excitation structures for dielectric resonator antennas, dual-band 90°-hybrid couplers, feeding circuits for dual-band antennas, and mathematical models for the cylindrical dielectric resonator isolated in free space. The behaviors theoretically expected for the designed antennas are confirmed by means of results obtained from electromagnetic simulation and from experimental measurements, which indicates the validity of the assumed hypotheses, of the proposed antenna configurations and of the conceived design methodology, also demonstrating the flexibility of the latter for various antenna specifications. The advances obtained with this work and the improvements that can be made on it are identified by examining results recently published in the technical literature. This work was carried out as a sandwich doctoral research, developed at the University of Houston under the supervision of Prof. Stuart A. Long.

Este trabalho visou ao desenvolvimento de antenas de ressoador dielétrico de banda dupla em frequências de micro-ondas por meio do estabelecimento de uma metodologia de projeto para as mesmas e da proposição de configurações inéditas de antenas desse tipo. Estudos realizados sobre antenas de ressoador dielétrico e sobre suas técnicas de projeto forneceram a base para a elaboração de um procedimento de projeto para antenas de banda dupla que explora a flexibilidade das antenas de ressoador dielétrico. Empregando-se esse procedimento de projeto, duas antenas com configurações originais foram desenvolvidas para operar em frequências de micro-ondas. Uma delas é uma antena de ressoador dielétrico cilíndrica sobre plano de terra, destinada a operar nas frequências centrais de 3,94 GHz e de 5,42 GHz, com diagrama de radiação direcional e polarização circular na primeira banda de operação e com diagrama de radiação omnidirecional e polarização linear na segunda. A outra antena consiste em uma antena de ressoador dielétrico cilíndrica sobre substrato dielétrico aterrado, cujas frequências centrais de operação são 3,99 GHz e 6,20 GHz, com diagrama de radiação direcional e polarização circular em ambas as bandas de operação. O projeto das duas antenas também levou a contribuições novas adicionais em alguns temas específicos relacionados: estruturas de excitação para antenas de ressoador dielétrico, circuitos acopladores híbridos de 90° de banda dupla, circuitos de alimentação para antenas de banda dupla e modelos matemáticos para o ressoador dielétrico cilíndrico isolado no espaço livre. Os comportamentos previstos teoricamente para as antenas projetadas são confirmados por meio de resultados obtidos por simulação eletromagnética e por medição experimental, o que indica a validade das hipóteses adotadas, das configurações de antena propostas e da metodologia de projeto concebida, demonstrando também a flexibilidade desta para variadas especificações de antena. Os avanços obtidos com este trabalho e as melhorias que podem ser efetuadas sobre o mesmo são identificados examinando-se resultados recentemente publicados na literatura técnica. Este trabalho foi realizado na forma de uma pesquisa de doutorado sanduíche, desenvolvida parcialmente na University of Houston sob a supervisão do Prof. Stuart A. Long. / This work aimed at the development of microwave dual-band dielectric resonator antennas by means of establishing a design methodology for them and of proposing novel configurations of this antenna type. Studies on dielectric resonator antennas and on their design techniques provided the ground for elaborating a design procedure for dual-band antennas that exploits the flexibility of dielectric resonator antennas. By employing this design procedure, two antennas with original configurations have been developed for operation at microwave frequencies. One of them is a cylindrical dielectric resonator antenna on a ground plane, intended for operation at the center frequencies of 3.94 GHz and 5.42 GHz, with a directional radiation pattern and circular polarization in the first operating band and with an omnidirectional radiation pattern and linear polarization in the second one. The other antenna consists of a cylindrical dielectric resonator antenna on a grounded dielectric substrate, whose operating center frequencies are 3.99 GHz and 6.20 GHz, with a directional radiation pattern and circular polarization in both operating bands. The design of the two antennas also led to additional new contributions in some related specific subjects: excitation structures for dielectric resonator antennas, dual-band 90°-hybrid couplers, feeding circuits for dual-band antennas, and mathematical models for the cylindrical dielectric resonator isolated in free space. The behaviors theoretically expected for the designed antennas are confirmed by means of results obtained from electromagnetic simulation and from experimental measurements, which indicates the validity of the assumed hypotheses, of the proposed antenna configurations and of the conceived design methodology, also demonstrating the flexibility of the latter for various antenna specifications. The advances obtained with this work and the improvements that can be made on it are identified by examining results recently published in the technical literature. This work was carried out as a sandwich doctoral research, developed at the University of Houston under the supervision of Prof. Stuart A. Long.