No description available.

Orientador: Marcus Cesar Avezum Alves de Castro / Resumo: Soluções relacionadas a melhores práticas de manejo de resíduos são procuradas por gestores de cidades em todo o mundo. O presente estudo propôs cenários de ação para a gestão dos resíduos sólidos urbanos dos seis municípios com sede na bacia do rio Corumbataí. O estudo foi realizado em duas etapas, a primeira consistiu na elaboração do diagnóstico dos mecanismos praticados atualmente, realizado a partir da análise de um conjunto de indicadores. A segunda etapa foi a composição de cenários para destinação para o tratamento de resíduos orgânicos e disposição final em aterro sanitário dos resíduos sólidos urbanos dos municípios investigados. Foram estudados seis municípios, os quais cinco possuem menos de 30.000 habitantes (Analândia, Charqueada, Corumbataí, Ipeúna e Santa Gertrudes) e Rio Claro possui 199.000 habitantes. Durante a primeira etapa, foram levantados dados e elaboradas matrizes SWOT para cada um dos municípios, com isso, buscou-se apontar fatores positivos e negativos das práticas atuais de gestão. Esses resultados sinalizaram que (i) os municípios ainda não participam de gestão compartilhada para manejo de resíduos; (ii) existe pouco ou nenhum tratamento para os resíduos orgânicos e de poda e capina; (iii) existe coleta seletiva em toda a zona urbana de todos os municípios investigados (iv) existe participação organizada do setor informal na coleta de recicláveis (v) existe possibilidade de gestão compartilhada dos resíduos; (vi) os municípios não possuem sustent... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Solutions related to waste management practices are sought by city managers around the world. This study proposed action scenarios for the urban solid waste management of six municipalities located in the Corumbataí River basin. The study was conducted in two stages, the first consisted in the diagnosis of the mechanisms currently practiced, through the analysis of a set of performance indicators. The second stage comprised the composition of operating scenarios for the shared urban solid waste management of the investigated municipalities. Six municipalities were studied, five of which have less than 30,000 inhabitants (Analândia, Charqueada, Corumbataí, Ipeúna and Santa Gertrudes) and Rio Claro has 199,000 inhabitants. During the first part, data were collected and SWOT matrices were elaborated for each of the municipalities studied. Thus, it was sought to point out positive and negative factors of current management practices. These results signaled that (i) municipalities do not yet participate in any consortium for shared waste management; (ii) there is little or no treatment for organic residues; (iii) there is selective collection throughout the urban area of all municipalities (iv) there is organized participation of the informal sector in the collection of recyclables (v) there is the possibility of cities consortium for shared waste management; (vi) municipalities do not have financial sustainability for the waste management system. During the second phase, transpor... (Complete abstract click electronic access below) / Doutor

The construction industry is considered the world over as a major contributor to the high rates of waste generation in developed countries. The negative influence of waste generation on the environment, natural resources, and the profitability of firms puts increasing pressure on the industry to reduce the waste it generates. The pressures to reduce waste are heightened by current trends demanding sustainable management of waste for the purposes of economic, social, and environmental gains. Literature on factors influencing waste management (WM) suggests government legislation is the most critical success factor for ensuring waste is sustainably managed. A review of the literature however indicated that researches holistically investigating the practices of construction firms and the extent to which these practices meet the intended outcomes of government legislation on waste are not present. Thus this research was undertaken to holistically investigate WM practices in the UK construction industry, to identify best practices and the extent to which they meet the intended outcomes of government WM legislation ad policy. The study adopted a multiple case study design to examine WM approaches, strategies and practices at both the corporate and project level within construction companies. Four construction companies who had won awards for their sustainability and environmental performance were purposefully selected to investigate best practice WM. Data was collected through semi-structured interviews, passive observations, and documentary analysis. Analysis of the data revealed that the drivers for WM in the construction industry are: economic considerations; company sustainability agenda; company image; client requirements; environmental concerns; government legislation; moral and social demands; industrial benchmarking; environmental concerns; and the requirements of standards. Regarding the influence of legislation, the results revealed that government legislation plays a secondary role in influencing WM as clients are interested in using only compliant firms. Best practices targeting design to reduce waste through standardisation and prefabrication; on-site segregation through multi-skip provision; supply take back schemes; intensified site education; and the use of incentives were identified to lead to improved WM. The results also indicated that company sustainability agenda is the most influential driver for achieving sustainable construction, demolition and excavation (CD&E) WM. The findings highlighted the importance of having a clear vision and structure for WM at the corporate level alongside strategies to be implemented on projects to ensure sustainable WM is achieved. To help construction firms in achieving sustainable WM, which is the ultimate goal of government legislation, a best practice framework has been developed based on the findings from the study and evaluated using semi-structured interviews with selected target participants. The framework presents a coherent and systematic approach for achieving sustainable WM in construction companies by providing a roadmap for instituting measures at both corporate and project levels, taking into account factors that are likely to promote or inhibit the achievement of sustainable WM.

Master of Science / Department of Hospitality Management and Dietetics / Elizabeth B. Barrett / Along with increasing environmental challenges and large quantities of energy demand, many have become concerned about the environment and have implemented “Going Green” strategies. As a result, plans for sustainable development are being adopted by governments, institutions, operations, and individual households. Many National Association of College & University Food Service (NACUFS) members may have heard about sustainability, but they may not apply their knowledge to developing practical outcomes and solutions. Very little research has been published that measures how NACUFS members are responding to Sustainable Waste Management (SWM) and to the new Sustainability Guide published by the NACUFS organization in September 2009. The primary purposes of this study were to ascertain what SWM programs have been implemented in college and university foodservices operations and determine how NACUFS members’ attitudes, subjective norms, and barriers affect the implementation of additional SWM programs based on the Theory of Planned Behavior (TPB). A secondary purpose was to identify the differences in intention to implement sustainable waste management programs based on characteristics of the respondents’ age, size of facility, region of the country and if the facility had a sustainable waste management committee. In this study, 2,184 NACUFS members whose e-mail addresses were listed in the NACUFS membership directory were selected as subjects. The data were analyzed using SPSS version 17.0. Multiple linear regression analysis, T-tests, and ANOVA were used to test the hypotheses and research questions. Statistical significance was set at p≤0.05. The total number of responses was 212 resulting in a 13.5% response rate. The majority of respondents had implemented SWM programs that don’t require major resources. NACUFS members had positive attitudes about implementing a SWM program and their superiors, university administrators, and students’ opinions were important others to consider when implementing a SWM program. Whether a college and university foodservice has a sustainability committee was the only demographic that significantly influenced NACUFS members’ intentions to implement a SWM program. Overall, attitude and subjective norms were the only significant predictors of intention to implement a SWM program (p≤.05). Therefore, if NACFUS members have a positive attitude about sustainability, important others around them who agree and there is a sustainability committee within the operation, they are more likely to implement a SWM program. Keywords: Sustainable waste management, TPB, college and university foodservice

As municipalities in the developing world are struggling to deal with the ever-increasing rate of residential trash generation, many have embraced the practice of diverting organic waste to composting plants. However, because most models for implanting new Solid Waste Management (SWM) programs have emerged from the experiences of municipalities in the industrialized world, they often gloss over the particular social, cultural and economic contexts that make SWM programming particularly challenging in the developing world. In Mexico City, the absence of curbside collection, and a trash workforce comprised of both formal and informal trash collectors, have created unique challenges for the municipality’s composting program that was initiated in 2004. This report attempts to highlight that the limited success of the program thus far might be rooted in the program’s design, which has largely ignored the needs of the trash workers who are largely held responsible for its implementation. / text

The purpose of this thesis will be to explore conceptions of waste in Nepal’s rural village of Simigaau to understand what constitutes waste and in what ways it is critical to the community’s physical and cultural survival. Due to the contribution of many aspects of daily life in the creation of “waste” in Simigaau –what it is and what it means – I hope to use a whole systems approach to understand the multitude of factors that affect how villagers view waste and whether its value can provide insight into a local way of life. Moreover, I aim to explore whether a community’s waste – seen and unseen – provide insight into a local way of life and if so, how this insight may be applied to both Nepal at large and connotations of “waste” in the West.

This work focuses on diffusion and advection through cementitious media, the work arises from two research contracts undertaken at Loughborough University: Experiments to Demonstrate Chemical Containment funded by UK NDA and the SKIN project, funded by the European Atomic Energy Community's Seventh Framework Programme. Diffusion will be one of the most significant mechanisms controlling any radionuclide migration from a nuclear waste, deep geological disposal facility. Advection may also occur, particularly as the immediate post closure groundwater rebound and equilibration proceeds but is expected to be limited by effective siting and management during the operational phase of the facility. In this work advection is investigated at laboratory scale as a possible shorter timescale technique for providing insight into the much slower process of diffusion. Radial techniques for diffusion and advection have been developed and the developmental process is presented in some detail. Both techniques use a cylindrical sample geometry that allows the radionuclide of interest to be introduced into a core drilled through the centre of the test material. For diffusion the core is sealed and submerged in a container of receiving solution which is sampled and analysed as the radionuclide diffuses into it. For advection, a cell has been designed that allows inflow via the central core to pass through the sample in a radial manner and be collected as it exits from the outer surface. The radionuclide of interest can be injected directly into the central core without significant disturbance to the advective flow. Minor improvements continue to be made but both techniques have provided good quality, reproducible results. The majority of the work is concentrated on a potential cemetitious backfill known as NRVB (Nirex Reference Vault Backfill) this is a high porosity, high calcium carbonate content cementitious material. The radioisotopes used in this work are 3H (in tritiated water), 137Cs, 125I, 90Sr, 45Ca, 63Ni, 152Eu, 241Am along with U and Th salts. In addition the effect of cellulose degradation products (CDP) on radioisotope mobility was investigated by manufacturing solutions where paper tissues were degraded in water, at 80°C, in the absence of air and at high pH due to the presence of the components of NRVB. All diffusion experiments were carried out under a nitrogen atmosphere. All advection experiments were undertaken using an eluent reservoir pressurised with nitrogen where the system remained closed up to the point of final sample collection. Results for tritiated water and the monovalent ions of Cs and I were produced on a timescale of weeks to months for both diffusion and advection. The divalent ions of Sr, Ca and Ni produced results on a timescale of months to years. Variations of the experiments were undertaken using the CDP solutions. The effects of CDP were much more apparent at radiotracer concentration than the much higher radiotracer with non-active carrier, concentration. In the presence of CDP Cs, I and Ni were found to migrate more quickly; Sr and Ca were found to migrate more slowly. Additional Sr experiments were undertaken at elevated ionic strength to evaluate the effect of the higher dissolved solids content of the CDP solutions. Some of the results for HTO, Cs, I and Sr have been modelled using a simple numerical representation of the system in GoldSim to estimate effective diffusivity and partition coefficient. The diffusion model successfully produced outputs that were comparable to literature values. The advection model is not yet producing good matches with the observed data but it continues to be developed and more processes will be added as new results become available. Autoradiography has been used to visualise the radionuclide migration and several images are reproduced that show the fate of the radiotracers retained on the NRVB at the end of the experiments. As the experimental programme progressed it was clear that results could not be produced in a suitable timescale for Eu, Am U and Th. These experiments have been retained and will be monitored every six months until either diffusion is detected or the volume of receiving liquid is inadequate to ensure the NRVB is saturated.

This project was a case study with a Local Authority (Charnwood Borough Council, Leicestershire) to research the options in response to the challenges of managing household waste. This research focused on establishing and analysing methods of improving the sustainability of household waste management operation within a Waste Collection Authority, where the interaction with a variety of external and internal stakeholders meant a holistic approach was needed. Waste management practices and performances in Charnwood were evaluated and benchmarked against national standards and the demography of a semi-rural Borough. Waste management practices nationally were also reviewed. The performance of the LA was quantitatively compared with other UK LAs where higher recycling performances are achieved. Differences were separate food waste collection and treatment; a larger proportion of urban housing and the university with a transient population. Other differences included strategy and operational practices for garden waste, the storage, collection, transportation and treatment of waste. A time series statistical model was modified and applied to investigate long term waste generation trends from the Boroughs official waste data returns to Defra. These were used to assess the success of interventions undertaken. This statistical model was able to differentiate interventions that were able to achieve lasting improvements in either waste minimisation or recycling. The declaration of a Zero Waste Strategy was to capture the public imagination. A series of focus groups and public consultations were held to judge public reaction and develop and refine the strategy. These were used to adapt the Zero Waste idea to suit the local conditions. A major conclusion was that householder involvement would be crucial for successful implementation of the further separation of waste that would be required.

The food production system has been acknowledged as a problem that needs to be addressed in order to achieve a sustainable society. Hertwich and Peters (2009), estimate that 10-30% of an individual’s environmental impact is related to the industrial production and consumption of food. The problem is aggravated by the wastage of one third of the global food production. The consequences of the wastage of food are the loss of resources, such as energy, water, land and labour and unnecessary emissions of pollutants. In order to address this problem several actions have been proposed. The Sustainable Development Goal 12.3, which Sweden has committed to fulfil, aims to reduce by half the amount of food waste along the production and supply chain by 2030. Retail is an important player in the food supply chain. Its influence spreads both upstream to suppliers and downstream to consumers. Therefore, this research aims to contribute to reduction of the environmental impacts related to food waste in retail, by identifying products with high environmental impacts. The main goals of this study are 1) the quantification of food waste produced by the supermarket and 2) to examine the environmental impacts of selected products in order to assess the impacts generated by the waste production at the supermarket. The findings of the research revealed 1) the importance of not only measuring the food waste in terms of mass, but also in terms of environmental indicators and costs. The results indicate bread as an important contributor for the environmental footprint of the supermarket and a potential product for interventions 2) Sorting the organic content of the products from its packaging before sending it to the current waste treatment leads to a reduction in the carbon footprint. The research identified the following recommendations: 1) increasing supermarket personnel and consumers’ awareness regarding the environmental impact of food waste, 2) finding alternative routes for waste treatment and 3) improving logistic operations.

The number of batteries, namely accumulators, is growing. Consequently, their take-away and a need of recyclation is increasing too. It is thus necessary to find a suitable way to their optimalization that can lead to the establishment of new waste collection machineries. This study deals with the data analysis by ECOBAT s.r.o. company, data processing and a model construction (in five different versions). The output of the diploma thesis is a model of the batteries collection enabling closer look on take-away routes, The model is based on the distances of take-away routes based on a principle of the utility areas and a role of a transport. The data are obtained from ArcGIS 10.5 and subsequently handled in Microsoft Excel. The outputs are the map schemes issuing from five different versions. The first one is showing the current situation, The other one is showing the version of treating units in three largest towns of the Czechia, the third one treating units in all the towns with above 100 000 inhabitants. The forth on eis showing a possibility to have a collection point in each of the county seats. The last one has the same location, but the threating units have higher capacities. The model is general, there is therefore a possibility of using it for other similar situations.