• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 43
  • 7
  • 7
  • 6
  • 5
  • 5
  • 4
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 2
  • 1
  • Tagged with
  • 96
  • 96
  • 31
  • 28
  • 24
  • 21
  • 17
  • 16
  • 14
  • 14
  • 11
  • 11
  • 11
  • 11
  • 11
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
51

Contribution à la modélisation des pertes par courants de Foucault dans les circuits magnétiques feuilletés des machines électriques / Contribution to modelling of eddy current losses in magnetic stacked cores of electric machines

Faye, Wagane Koli 05 June 2014 (has links)
Dans le cadre de la lutte contre l'augmentation des gaz à effet de serre et la préservation de l'environnement, l'efficacité énergétique est un enjeu majeur du XXIème siècle. Par exemple, les moteurs et actionneurs électriques sont de plus en plus nombreux dans le monde, les transformateurs de distribution affichent une efficacité énergétique de 97 à 99 %. Cependant, en raison de leur utilisation intensive, leur impact environnemental est loin d'être négligeable. De ce fait une compréhension et une détermination plus précise des pertes dans ces machines électriques permettraient d'améliorer l'efficacité énergétique des dispositifs d'électronique de puissance et des machines électriques. Ces dispositifs sont le siège de pertes dans les bobinages et dans les circuits magnétiques. L'objectif de cette thèse est de pouvoir modéliser, par des méthodes numériques de type éléments finis, les pertes dans les circuits magnétiques feuilletés des machines électriques.Cependant le laminage de ces circuits magnétiques, qui permet de réduire les courants de Foucault, induit de fortes contraintes de modélisation. En effet la nécessité de disposer d'au moins deux éléments finis dans l'épaisseur de peau pour obtenir une solution de qualité, conduit à la réalisation de maillages de taille très importante, incompatible avec les moyens de calcul disponibles aujourd'hui.L'objectif de ce travail est de développer des modèles de lois de comportement homogénéisé des matériaux magnétiques feuilletés dans le cadre de l'utilisation de la méthode des éléments finis en 2D et 3D, avec application aux machines tournantes et aux transformateurs. Ces modèles à priori permettront de prendre en compte les pertes en cours de résolution, afin d'obtenir des résultats précis sur les grandeurs locales et globales, et notamment les pertes, en fonction du temps. / Energy efficiency becomes a global major issue of XXIst century as we are dealing with greenhouse emissions. For instance electric rotating machines and actuators are globally more used than before. Distribution transformers do have 97 to 99% efficiency rate, with a non negligible environmental impact due to their intensive use. A thorough understanding and modeling of losses in those electric devices could help improving and maintaining that level of environmental impact and energy efficiency. This could be productive to many electrical devices from power electronics devices to electric machines and networks, because of losses in windings and magnetic cores. The main aim of this study is to model eddy current losses in laminated magnetic cores of electric machines by means of numerical methods such as Finite Element Methods (FEM).Laminating magnetic cores besides reducing eddy current loops, induces new modeling constraints . The necessary assignment of at least two elements in the skin depth in order to have good quality solutions, leads sometimes to unsolvable problems using actual computation solutions.The purpose will be to develop source code of homogenized behavior laws of laminated magnetic cores using 2D and 3D finite element methods, applied to transformers and electrical motors. Those a priori models consider losses in the main solving process allowing to have accurate results on local and macroscopic entities varying temporally.
52

Design and Optimization of Displacement Measurement Eddy Current Sensor for Mass Production

Guganeswaran, S January 2014 (has links) (PDF)
Eddy current (EC) based testing and measurement methods are well known in non-destructive testing (NDT) world. EC sensors are extensively studied and used for material health monitoring and its property measurement. Target displacement measurement is one of the well-known applications of EC method. The main advantage of EC sensor is its working capability in harsh environment like humidity, contamination etc. It is non-contact, rugged and requires less maintenance. The range and sensitivity of target displacement is mainly determined by the probe geometry and its construction method. Also displacement measurement depends upon geometry and electromagnetic (EM) properties of the target plate. Any variation of ambient temperature alters the EM properties of the probe as well as EM properties of the target. Thus, many parameters like geometry, EM properties and temperature involved in target displacement measurement. Hence, while using EC sensor for displacement measurement, it demands careful design and measurement procedure to achieve high sensitivity and high precision with low temperature drift. To achieve these, we present the following. 1) A temperature compensation technique 2) Optimization of probe geometry and its construction method to increase the range and sensitivity 3) Selection of suitable probe measurement parameter (Z, R, X) based on target material properties 4) Making the displacement measurement less sensitive to tolerance in probe construction parameter. A temperature compensation technique for target displacement measurement, using a self-running LC oscillator has been presented. A sensing coil is energized by a Hartley oscillator. The oscillator voltage is maintained at a constant level by a closed loop feedback circuit and the average feedback current to the oscillator is measured for target displacement detection. The temperature drift of the feedback current is compensated by applying temperature compensation function (TCF) and this is verified experimentally. Cold rolled mild steel (carbon steel) is taken as a target material and the sensor is tested over a temperature range of 20 °C – 80 °C. It shows that the temperature drift is less than ±30 ppm/°C over 3 mm target displacement. To match all the sensor modules in mass production, components selection procedure is presented. To avoid mismatch across sensors in manufacturing process, the transistor based oscillator is modified with operational trans-conductance amplifier (OTA). The same temperature compensation formula (TCF) is applied to compensate the temperature drift of feedback current and achieved intended accuracy. Geometry and construction parameters of the eddy current sensing probe is optimized for target displacement measurement using Ansoft Maxwell, electromagnetic design software. EC probe with different geometry are analyzed in search of suitable geometry for target displacement measurement. Four shapes of commercially available core have been chosen for probe construction. For each shape of sensing probe, the radius and height of the probe is increased by 0 mm to 9 mm to find the effect of them on sensitivity and range of target displacement measurement. It has been observed that the probe with less height and maximum diameter has shown better performance. In addition to that, the probe geometry is optimized to achieve more sensitivity and range within the space available for probe mounting. It helps to utilize the available space effectively for probe design. Coil winding and mount-ing it inside the core window also important parameter in probe design. It has been observed that de-pressing the sensing coil inside the core window from sensing face by 3 mm decreases the sensitivity by 40 %. Hence, it is recommended to place the coil on the extreme end of the sensing face of the core. To know the effect of core permeability, it is varied from 1000 to 15000. It has been observed that it has no effect on sensitivity and measurement range. Only optimizing the probe geometry and its construction method is not adequate for target displacement measurement. We know that the EC based displacement measurement is also target material dependent. Generally probe impedance is measured and then the temperature drift of the sensing coil resistance is compensated to know the target displacement. Most of the temperature compensation techniques use this compensation technique and it is shown that those are suitable for high conductivity targets like copper. Choosing Z for displacement measurement may not be only best choice for all target materials. The displacement can be measured also through either R or X of the probe. Choosing the proper probe parameter for a given target material will provide a less temperature drift for target displacement measurement. To know about this, a simulation has been made for target displacement measurement with target metal of μr = 1, relative permittivity εr =1, and temperature coefficient of resistivity ∝ = 0.004 K-1. The conductivity (σ) of the target is varied from 1×106 S/m to 62×106 S/m in the temperature range of 20 ℃ – 80 ℃. Now the simulation has been repeated by fixing  as a constant and varying target μr. The metal plate with  = 1×106 S/m, εr=1 and ∝ = 0.004 K – 1 is taken as a target and μr is varied from 100 to 10000. For both conductivity and permeability sweep analysis, the target displacement is measured as a function of Z, R and X independently. The temperature drift in displacement measurement is also analysed for the above temperature range. An experiment has been conducted with copper, stainless steel and mild steel as target metal in the temperature range of 20 ℃ – 80 ℃. The temperature drift is calculated when the displacement is measured as function of Z, R and X. Based on the results, we have identified that the target material relative permeability determines the selection of probe measurement parameter for target displacement measurement. Hence, knowing tar-get r alone suffice to select the probe measurement parameter (Z or R or X) for displacement measurement. Optimizing the probe geometry, selecting the proper probe measurement parameter and temperature compensation technique suffice to provide a good sensitivity, range and low temperature drift for a single probe. But in general, one of the mass produced probes is selected as a reference probe and it is calibrated against the ambient temperature and target displacement. And the calibration curves are loaded to all the probes. Matching the probe construction parameters to each other across the production patches is not possible in mass production. This makes the temperature compensation function and displacement calibration are different for every individual probes for displacement measurement. This degrades the measurement accuracy. A simulation has been performed with pot core with commercial tolerance. Using this, we have obtained 24 probes due to variations in 1) Individual and few combinational variations in core and coil dimensions 2) Core permeability variation and 3) relative position of the coil with respect to core. Finally, we have quantified the displacement error for each probe. We have identified the important probe dimensional parameters that have to be controlled precisely in mass production to improve the measurement accuracy. It shows error of 0.86 % in the displacement measurement when the relative reactance and relative displacement is used for measurement. In practice, error in displacement measurement due to both the ambient temperature drift and the tolerance in probe construction parameter exist simultaneously. Hence, the combined error is computed for the target displacement range of 0 mm – 3 mm for the temperature range of 0 °C – 100 °C. The total error of less than 1 % is achieved for commercial standard probe tolerance. Finally, we have provided general factory production procedure and user calibration procedure of probe design to achieve cost effective displacement measurement with sensitivity and range with low temperature drift.
53

Optimalizace regulačního algoritmu MR tlumiče / Optimization of Control Algorithm of MR Damper

Strecker, Zbyněk Unknown Date (has links)
This work deals with the usage of magneto-rheological (MR) damper in the semi-active car suspension. Semi-active suspension can improve ride comfort or tyre grip to the level, which cannot be achieved with the common passive setting of the damper. MR damper has however features, like time response of the controller with MR damper and the control range of the MR damper, which limit area of application. It was found out that especially the time response of the damper significantly influences the efficiency of semi-active algorithms. Current MR dampers with controllers are not capable of efficient control of the semi-active suspension. For proper design of semi-active suspension with MR dampers, the time response must be decreased. Therefore, a new PWM current controller was designed and verified. Also changes in MR damper design which eliminate eddy-currents in the magnetic circuit were proposed. The results of this work should contribute to the better design of semi-active suspension systems with MR damper.
54

Simulation, design and experimental validation of a passive magnetic damper for ultra-fast actuators

Chen, Chen January 2014 (has links)
A contact system driven by a high energetic Thomson actuator requires to be decelerated from full speed down to zero. The forces originated from the interaction between a stationary copper tube and a moving array of magnets combined with plastic or ferromagnetic material are used to generate eddy-current damping. Five different configurations of small but strong (N52) neodymium magnets and spacers were benchmarked for simple free-fall damping. A comparison between experimental results and simulations (using COMSOL) has shown that the most effective damping is reached by two consecutive permanent magnets with opposite magnetization directions ,separated by low-carbon content steel concentrators(SN - Fe concentrator- NS). The proposed damper design is the result of the balance between various parameters such as magnet orientation topology in the array, spacer material and its dimensions, copper tube thickness and the air gap between copper tube and array. Furthermore, the design was scaled up and an actuator-drive system was added to perform more realistic tests, which demonstrated the damping effectiveness on a fast moving armature actuated by a Thomson coil energized by a capacitor bank. All models in the simulation predicted the damping effect in advance. Investigations were conducted with two cases: (1) A solid copper rod was supposed to pass through the magnet array; (2) A plastic shaft was applied to support the magnet array. Finally a damping prototype with a plastic shaft was built for completing damping tests. The results of these tests validated the numerical model with a high degree of accuracy.
55

Design and Development of Scanning Eddy Current Force Microscopy for Characterization of Electrical, Magnetic and Ferroelectric Properties with Nanometer Resolution

Nalladega, Vijayaraghava 19 August 2009 (has links)
No description available.
56

Application of Design-of-Experiment Methods and Surrogate Models in Electromagnetic Nondestructive Evaluation / Application des méthodes de plans d’expérience numérique et de modèles de substitution pour le contrôle nondestructif électromagnétique

Bilicz, Sandor 30 May 2011 (has links)
Le contrôle non destructif électromagnétique (CNDE) est appliqué dans des domaines variés pour l'exploration de défauts cachés affectant des structures. De façon générale, le principe peut se poser en ces termes : un objet inconnu perturbe un milieu hôte donné et illuminé par un signal électromagnétique connu, et la réponse est mesurée sur un ou plusieurs récepteurs de positions connues. Cette réponse contient des informations sur les paramètres électromagnétiques et géométriques des objets recherchés et toute la difficulté du problème traité ici consiste à extraire ces informations du signal obtenu. Plus connu sous le nom de « problèmes inverses », ces travaux s'appuient sur une résolution appropriée des équations de Maxwell. Au « problème inverse » est souvent associé le « problème direct » complémentaire, qui consiste à déterminer le champ électromagnétique perturbé connaissant l'ensemble des paramètres géométriques et électromagnétiques de la configuration, défaut inclus. En pratique, cela est effectué via une modélisation mathématique et des méthodes numériques permettant la résolution numérique de tels problèmes. Les simulateurs correspondants sont capables de fournir une grande précision sur les résultats mais à un coût numérique important. Sachant que la résolution d'un problème inverse exige souvent un grand nombre de résolution de problèmes directs successifs, cela rend l'inversion très exigeante en termes de temps de calcul et de ressources informatiques. Pour surmonter ces challenges, les « modèles de substitution » qui imitent le modèle exact peuvent être une solution alternative intéressante. Une manière de construire de tels modèles de substitution est d'effectuer un certain nombre de simulations exactes et puis d'approximer le modèle en se basant sur les données obtenues. Le choix des simulations (« prototypes ») est normalement contrôlé par une stratégie tirée des outils de méthodes de « plans d'expérience numérique ». Dans cette thèse, l'utilisation des techniques de modélisation de substitution et de plans d'expérience numérique dans le cadre d'applications en CNDE est examinée. Trois approches indépendantes sont présentées en détail : une méthode d'inversion basée sur l'optimisation d'une fonction objectif et deux approches plus générales pour construire des modèles de substitution en utilisant des échantillonnages adaptatifs. Les approches proposées dans le cadre de cette thèse sont appliquées sur des exemples en CNDE par courants de Foucault / Electromagnetic Nondestructive Evaluation (ENDE) is applied in various industrial domains for the exploration of hidden in-material defects of structural components. The principal task of ENDE can generally be formalized as follows: an unknown defect affects a given host structure, interacting with a known electromagnetic field, and the response (derived from the electromagnetic field distorted by the defect) is measured using one or more receivers at known positions. This response contains some information on the electromagnetic constitutive parameters and the geometry of the defect to be retrieved. ENDE aims at extracting this information for the characterization of the defect, i.e., at the solution of the arising “inverse problem”. To this end, one has to be able to determine the electromagnetic field distorted by a defect with known parameters affecting a given host structure, i.e., to solve the “forward problem”. Practically, this is performed via the mathematical modeling (based on the Maxwell's equations) and the numerical simulation of the studied ENDE configuration. Such simulators can provide fine precision, but at a price of computational cost. However, the solution of an inverse problem often requires several runs of these “expensive-to-evaluate” simulators, making the inversion procedure firmly demanding in terms of runtime and computational resources. To overcome this challenge, “surrogate modeling” offers an interesting alternative solution. A surrogate model imitates the true model, but as a rule, it is much less complex than the latter. A way to construct such surrogates is to perform a couple of simulations and then to approximate the model based on the obtained data. The choice of the “prototype” simulations is usually controlled by a sophisticated strategy, drawn from the tools of “design-of-experiments”. The goal of the research work presented in this Dissertation is the improvement of ENDE methods by using surrogate modeling and design-of-experiments techniques. Three self-sufficient approaches are discussed in detail: an inversion algorithm based on the optimization of an objective function and two methods for the generation of generic surrogate models, both involving a sequential sampling strategy. All approaches presented in this Dissertation are illustrated by examples drawn from eddy-current nondestructive testing.
57

Modelling the transient response of windings, laminated steel coresand electromagnetic power devices by means of lumped circuits : With special reference to windings with a coaxial insulation system

Holmberg, Pär January 2000 (has links)
<p>Electromagnetic transients impinging on electromagnetic power devices - such as electric machines, transformers and reactors - can stress the design severely. Thus the magnitudes of the transients are often decisive for the design of the devices. Further, the operation of a device can be transient in itself. This is the case for the explosive magnetic flux compression generator (EMG) and a ferromagnetic actuator. </p><p>Models are presented that are mainly intended for transients in the millisecond range and faster. Hence, eddy currents and the related skin and proximity effect become significant in windings, magnetic cores and in the armatures of the devices. These effects are important for, e.g., the damping of the transients. Further, the displacement current in the insulation of the winding is significant. It changes the response of the windings dramatically, as it manifests the finite velocity of propagation of the electromagnetic fields. Under such circumstances, reflections and excited resonances can make the transient voltage and current distribution highly irregular. </p><p>Induced voltages are modelled with self and mutual inductances or reluctances combined with winding templates. The displacement currents are modelled with capacitances or coefficients of potential. Cauer circuits and their dual form are used to model eddy currents in laminated cores and in conductors. The Cauer circuit enables one to consider hysteresis and the non-linear response of a magnetic core. It is also used to model the eddy currents in the moving armature of an EMG. </p><p>A set-up is presented that can be used to study the transient voltage and the current distribution along a coil. </p><p>The transient response of coaxially insulated windings is analysed and modelled in detail. A lumped circuit model is developed for a coil, Dryformer<sup>TM</sup> - the new high-voltage transformer - and Powerformer<sup>TM</sup>, the new high-voltage generator. An alternative model, a combined lumped circuit and FEM model, is presented for a coaxially insulated winding in two slot cores.</p>
58

Modelling the transient response of windings, laminated steel coresand electromagnetic power devices by means of lumped circuits : With special reference to windings with a coaxial insulation system

Holmberg, Pär January 2000 (has links)
Electromagnetic transients impinging on electromagnetic power devices - such as electric machines, transformers and reactors - can stress the design severely. Thus the magnitudes of the transients are often decisive for the design of the devices. Further, the operation of a device can be transient in itself. This is the case for the explosive magnetic flux compression generator (EMG) and a ferromagnetic actuator. Models are presented that are mainly intended for transients in the millisecond range and faster. Hence, eddy currents and the related skin and proximity effect become significant in windings, magnetic cores and in the armatures of the devices. These effects are important for, e.g., the damping of the transients. Further, the displacement current in the insulation of the winding is significant. It changes the response of the windings dramatically, as it manifests the finite velocity of propagation of the electromagnetic fields. Under such circumstances, reflections and excited resonances can make the transient voltage and current distribution highly irregular. Induced voltages are modelled with self and mutual inductances or reluctances combined with winding templates. The displacement currents are modelled with capacitances or coefficients of potential. Cauer circuits and their dual form are used to model eddy currents in laminated cores and in conductors. The Cauer circuit enables one to consider hysteresis and the non-linear response of a magnetic core. It is also used to model the eddy currents in the moving armature of an EMG. A set-up is presented that can be used to study the transient voltage and the current distribution along a coil. The transient response of coaxially insulated windings is analysed and modelled in detail. A lumped circuit model is developed for a coil, DryformerTM - the new high-voltage transformer - and PowerformerTM, the new high-voltage generator. An alternative model, a combined lumped circuit and FEM model, is presented for a coaxially insulated winding in two slot cores.
59

Electromagnetic transformer modelling including the ferromagnetic core

Ribbenfjärd, David January 2010 (has links)
In order to design a power transformer it is important to understand its internal electromagnetic behaviour. That can be obtained by measurements on physical transformers, analytical expressions and computer simulations. One benefit with simulations is that the transformer can be studied before it is built physically and that the consequences of changing dimensions and parameters easily can be assessed. In this thesis a time-domain transformer model is presented. The model includes core phenomena as magnetic static hysteresis, eddy current and excess losses. Moreover, the model comprises winding phenomena as eddy currents, capacitive effects and leakage flux. The core and windings are first modelled separately and then connected together in a composite transformer model. This results in a detailed transformer model. One important result of the thesis is the feasibility to simulate dynamic magnetization including the inhomogeneous field distribution due to eddy currents in the magnetic core material. This is achieved by using a Cauer circuit combined with models for static and dynamic magnetization. Thereby, all magnetic loss components in the material can be simulated accurately. This composite dynamic magnetization model is verified through experiments showing very good correspondence with measurements. Furthermore, the composite transformer model is verified through measurements. The model is shown to yield good correspondence with measurements in normal operation and non-normal operations like no-load, inrush current and DC-magnetization. / QC20100708
60

Measurement and modelling of unbalanced magnetic pull in hydropower generators

Wallin, Mattias January 2013 (has links)
Hydropower research is often perceived to be an old and exhausted field of study but with ageing equipment and the need for more intermittent operation caused by an increased share of other renewable energy sources new challenges lie ahead. The main focus of this dissertation are the electromagnetic forces resulting from nonuniform air gap flux, whether it be caused by rotor eccentricity or a faulty field winding. Results are predominantly obtained from measurements on an experimental generator and numerical simulations. With the computational capacity available today it is possible to numerically analyse physical phenomena that previously could only be studied with analytical tools. Numerical models can also be expanded to encompass more than one aspect of generator operation in coupled field-circuit models without model complexity surpassing computer capability. Three studies of unbalanced magnetic pull, UMP, in synchronous salient pole generators constitute the main part of this thesis. The first is a study of how parallel stator circuits affect the unbalanced magnetic pull caused by rotor eccentricity. Depending on the relationship between the geometry of the separate circuits and the direction of the eccentricity it was found that parallel circuits could reduce the UMP substantially. Secondly, an investigation of the effect of damper winding configuration on UMP was performed. The results showed that damper winding resistivity and the distance between the damper bars in a pole determine the effectiveness of the damper winding in reducing the UMP. Simulations of a production machine indicate that the reduction can be substantial from damper windings with low resistivity. The third study analyses the consequences of field winding interturn short circuits. Apart from a resulting rotating unbalanced magnetic pull it is found that the unaffected poles with the same polarity as the affected pole experience an increase in flux density. In a fourth article a new stand still frequency response, SSFR, test method including measurements of damper winding voltage and current is presented. It is found that the identified models are capable of predicting the stator to damper transfer function both with and without the damper winding measurements included.

Page generated in 0.0403 seconds