This diploma thesis is focused on the influence of thermal modification on the strength of bonded joint in tension according to ČSN EN 205. For the purpose of this work was used beech wood. The thermal modification of the test samples was performed at temperatures of 160 °C, 180 °C and 200 °C. The selected bond strength adhesives were melamine-urea formaldehyde adhesives (MUF), phenol-resorcinol formaldehyde adhesives (PRF) and one-component polyurethane adhesives (PUR). In addition to the thermal modification the effect of plasma modification on bond strength is also determined. The test lamellas were plasma treated (DCSBD) prior to gluing and pressing. The result is the determination of the tensile strength of the bonded joint in all the above-mentioned modifications and comparation of the results.

Voter decision-making about which political party to support in the elections is a very complex process. One of the key factors influencing our voting behaviour is the effect of particular candidates in terms of their local activities. Many Czech and also foreign studies show that candidates gain significantly higher preferences in the municipality of their residence and its surroundings. Within the analyzed parliamentary elections, this is reflected not only by the territorial concentration of preferential votes, but also by higher local electoral support of the political parties or movements represented by these candidates. This diploma thesis examines, among other things, differences in the strength of the described effect (technically called the friends and neighbours effect) between candidates from different political parties and in different regions of Czechia. Quantitative research has shown greater local strength and spatial extent of friends and neighbours effect for leading candidates from non-metropolitan areas who have experiences from local or regional politics, such as mayors or regional councilors. In the 2017 parliamentary elections, the friends and neighbours effect mostly influenced the spatial patterns of electoral support of the KDU-ČSL and the STAN movement and on the other...

Deficits in interval timing have been described in focal brain lesions and in various neuropsychiatric disorders including Parkinson's disease (PD). The aim of this study was to explore brain areas responsible for human time perception and for the timing deficit in PD. We used a time reproduction task (TRT) which consisted of an encoding phase (during which visual stimuli of durations from 5 to 16.6 sec were presented) and a reproduction phase (during which interval durations were reproduced by a button pressing). In our first fMRI study, we used a parametric modulated analysis searching for brain areas with activity, expressed as Blood Oxygenation Level Dependent (BOLD) signal, correlated with the duration of time interval. During the encoding phase, there was a gradual deactivation of the left prefrontal cortex (PFC) and cingulate gyrus. During the reproduction phase, there was a gradual deactivation in precuneus and an accumulation of activity in the left PFC, primary motor area, right caudate and supplementary motor area (SMA). The second study aimed at supporting the role of two of these areas, SMA and precuneus in interval timing by repetitive transcranial magnetic stimulation (rTMS). Accuracy and variability of time estimates were compared before and after rTMS. Accuracy of estimates was not...

Background: Psilocybin is today the most studied psychedelic substance in neuroscience for its psychotomimetic and therapeutic effects. One of the institutions in the Czech Republic that studies this substance is the National Institute of Mental Health, where a clinical evaluation of its effects and safety is underway. The action and safety of this substance is examined here in terms of acute intoxication, but also in terms of long-term effects. Aim: To determine how volunteers perceive the experience with psilocybin administered in a controlled experimental study environment and whether they have experienced any afterglow effects after the cessation of acute intoxication for 28 days after administration, as well as how these effects occur and how long they persist. Methods: Data was obtained using semi-structured interviews. The research group consists of 20 interviews with 10 healthy volunteers of the clinical study at NUDZ. Interviews were conducted on day 28 after administration of an active dose of psilocybin or placebo. A qualitative thematic analysis of these interviews was performed in order to identify topics within the framework set by the research questions. Results: The results showed that for the respondents, the experience with the active dose of psilocybin was significant in terms of...

Usage of mixed mode is popular among researchers mainly because of its flexibility and possibility of lowered costs, time and response bias. Therefore engagement in analysis of potential differences and problems is necessary mainly in mapping effects of these combinations. My diploma thesis focuses on possibilities of equivalence of mixed mode PAPI and CAPI collection of data. I use Multi-Group Confirmatory Factor Analysis (MG CFA) for analysing the equivalence of measurement. This is quite unusual method for analysing a mixed-mode and few researchers used it till now. Most of the studies focused on differences in answers of respondents caused by mode effect or cognitive process of answering the questions. Key words: Mixed mode design, equivalence, confirmatory factor analysis, CAPI and PAPI, mode effect

Object of this thesis is to find out the influence of modified particles by plasma on properties of OSB board bonded by pMDI resin. Particles were made from veneer, because it is easier to modify by plasma (DCSBD). Produced particles were tested for chosen physical and mechanical properties. Results show degradation of properties of modified boards

The thesis is focused on comparison of several ways of the calculation of thermal and moisture fields in wood containing bound water during drying and their comparison with commonly used standards for wood drying processes. Each of the four models presents different way of the unsteady-state calculation of the coupled thermal and moisture field in wood. The first model describes linear simulation, other three models present nonlinear simulation using material coefficients dependent on temperature and moisture content, differing in the method of the thermodiffusion (Soret effect) coefficient settings. The aim of the thesis is to establish the influence of Soret effect on the wood drying process and to describe the difference between commonly used presumption of this process and its presumption given by the unsteady-state computation of the coupled thermal and moisture fields in wood.

This diploma thesis deals with the topic of individual differences in susceptibility to framing effects. While some people respond sensitively to changes in the wording of decision problems, other people remain consistent in their decision-making regardless of a problem formulation. The goal of this thesis is to describe the current state of research evidence about these differences. The thesis first introduces main theoretical concepts of framing effect, focusing particularly on Prospect Theory, Dual-Process Theory and Fuzzy-Trace Theory. The thesis also elaborates on a framing effect typology, describes the main moderators of the effect, and summarizes the most important meta-analyses and replication studies. In the next part, the thesis introduces the main empirically described predictors of resistance to framing among cognitive styles, cognitive abilities, numeracy, personality dispositions and developmental factors. In the empirical part of the thesis, a pre- registered quantitative online study on a convenience sample from a Czech adult population (N = 584) was conducted with the goal of testing whether numeracy predicts resistance to framing above and beyond fluid intelligence, need for cognition and faith in intuition. For the purpose of the study, adapted two-factor Resistance to Framing scale and...

The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.

Terraforming mars by autonomous robotic building system, inspired by social insect. Idea design of robotic solution, their transportation and software. Design of structures builded by robots and their function. Pyramidal structures interwoven with ice tunnel, heat the atmosphere of Mars and accumulate heat in their mass. These structures are built with cheap and simple robots that mimic the behavior of social insects.