In the current age of fast-depleting conventional energy sources, top priority is given to exploring non-conventional energy sources, designing highly efficient energy storage systems and converting existing machines/instruments/devices into energy-efficient ones. ‘Energy efficiency’ is one of the important challenges for today’s scientific and research community, worldwide. In line with this demand, the current research was focused on developing two highly energy-efficient devices – field emitters and Li-ion batteries, using beneficial properties of carbon nanotubes (CNT). Interface-engineered, directly grown CNTs were used as cathode in field emitters, while similar structure was applied as anode in Li-ion batteries. Interface engineering was found to offer minimum resistance to electron flow and strong bonding with the substrate. Both field emitters and Li-ion battery anodes were benefitted from these advantages, demonstrating high energy efficiency. Field emitter, developed during this research, could be characterized by low turn-on field, high emission current, very high field enhancement factor and extremely good stability during long-run. Further, application of 3-dimensional design to these field emitters resulted in achieving one of the highest emission current densities reported so far. The 3-D field emitter registered 27 times increase in current density, as compared to their 2-D counterparts. These achievements were further followed by adding new functionalities, transparency and flexibility, to field emitters, keeping in view of current demand for flexible displays. A CNT-graphene hybrid structure showed appreciable emission, along with very good transparency and flexibility. Li-ion battery anodes, prepared using the interface-engineered CNTs, have offered 140% increment in capacity, as compared to conventional graphite anodes. Further, it has shown very good rate capability and an exceptional ‘zero capacity degradation’ during long cycle operation. Enhanced safety and charge transfer mechanism of this novel anode structure could be explained from structural characterization. In an attempt to progress further, CNTs were coated with ultrathin alumina by atomic layer deposition technique. These alumina-coated CNT anodes offered much higher capacity and an exceptional rate capability, with very low capacity degradation in higher current densities. These highly energy efficient CNT based anodes are expected to enhance capacities of future Li-ion batteries.

Breitstreifenlaser haben eine breite Emissionsapertur, die es ermöglicht eine hohe Ausgangsleistung zu erreichen. Gleichzeitig führt sie jedoch zu einer Verringerung der lateralen Strahlqualität und zu ihrem nicht-stationären Verhalten. Forschung in diesem Gebiet ist anwendungsgetrieben und somit ist das Hauptziel eine Erhöhung der Brillanz, die sowohl die Ausgangsleistung als auch die laterale Strahlqualität beinhaltet. Um die zugrunde liegenden raumzeitlichen Phänomene zu verstehen und dieses Wissen zu nutzen, um die Kosten der Brillanz-Optimierung zu minimieren, ist ein selbst-konsistentes Simulationstool notwendig, welches die wichtigsten Prozesse beinhaltet. Zunächst wird in dieser Arbeit ein quasi-dreidimensionales elektro-optisch-thermisches Model präsentiert, welches wesentliche qualitative Eigenschaften von realen Bauteilen gut beschreibt. Zeitabhängige Wanderwellen-Gleichungen werden genutzt, um die inhärent nicht-stationären optischen Felder zu beschreiben, welche an eine Ratengleichung für die Überschussladungsträger in der aktiven Zone gekoppelt sind. Das Model wird in dieser Arbeit um eine Injektionsstromdichte erweitert, die laterale Stromspreizung und räumliches Lochbrennen korrekt beschreibt. Des Weiteren wird ein Temperaturmodel präsentiert, das kurzzeitige lokale Aufheizungen in der Nähe der aktiven Zone und die Formierung einer stationären Temperaturverteilung beinhalten. Im zweiten Teil wird das beschriebene Modell genutzt, um die Gründe von Brillanz-Degradierung, das heißt sowohl die Ursprünge der Leistungssättigung als auch des nicht diffraktionslimitierten Fernfeldes zu untersuchen. Abschließend werden im letzten Teil Laserentwürfe besprochen, welche die laterale Brillanz verbessern. Hierzu gehört ein neuartiges “Schachbrettlaser” Design, bei dem longitudinal-laterale Gewinn-Verlust-Modulation mit zusätzlicher Phasenanpassung ausgenutzt wird, um eine sehr geringe Fernfeld-Divergenz zu erhalten. / Broad-area lasers are edge-emitting semiconductor lasers with a wide lateral emission aperture that enables high output powers, but also diminishes the lateral beam quality and results in their inherently non-stationary behavior. Research in the area is driven by application and the main objective is to increase the brightness which includes both the output power and lateral beam quality. To understand the underlying spatio-temporal phenomena and to apply this knowledge in order to reduce costs for brightness optimization, a self-consistent simulation tool taking into account all essential processes is vital. Firstly, in this work a quasi-three-dimensional opto-electronic and thermal model is presented, that describes well essential qualitative characteristics of real devices. Time-dependent traveling-wave equations are utilized to describe the inherently non-stationary optical fields, which are coupled to dynamic rate equations for the excess carriers in the active region. This model is extended by an injection current density model to accurately include lateral current spreading and spatial hole burning. Furthermore a temperature model is presented that includes short-time local heating near the active region as well as the formation of a stationary temperature profile. Secondly, the reasons of brightness degradation, i.e. the origins of power saturation and the spatially modulated field profile are investigated and lastly, designs that mitigate those effects that limit the lateral brightness under pulsed and continuous-wave operation are discussed. Amongst those designs a novel “chessboard laser” is presented that utilizes longitudinal-lateral gain-loss modulation and an additional phase tailoring to obtain a very low far-field divergence.