This project includes a basic overview of concepts as is communication, data communication and distributed to systems. Further focuses on the technology use for remote data collection. Part is dedicated PLC technologies, which use systems for remote data collection. The thesis is also mentioned the concept of quality of electrical energy and standard ČSN EN 50160. The main part is focused on the design, implementation and measurement of the PLC network.

Current federal and provincial efficiency standards for residential water heating are based solely on the tested efficiency of individual water heating devices. Additional energy expended or saved as the water cycles through the home is not taken into account. This research, co-funded by British Columbia’s Ministry of Energy, Mines and Petroleum Resources (MEMPR), is a first step toward the Province’s goal of developing a new energy efficiency standard for water heating systems in new construction. This groundbreaking new standard would employ a “systems” approach, establishing guidelines for new construction based on the total energy used for water heating within the building envelope The research team has developed a Simulink computer model which, using a one-minute time-step, simulates 24-hour cycles of water heating in a single-family home. The objectives of this thesis are to use that model to simulate a variety of water heating technology combinations, and to devise methods of utilizing the resulting data to evaluate water heating systems as a whole and to quantify each system’s relative energy impact. A metric has been developed to evaluate the efficiency of the system: the system energy factor (SEF) is the ratio of energy used directly to heat water over the amount of energy drawn from conventional fuel sources. The CO2 impact of that energy draw is also considered. Data is generated for cities in three different climates around BC: Kamloops, Victoria and Williams Lake. Electric and gas-fired tank water heaters of various sizes and efficiencies are simulated, along with less traditional energy-saving technologies such as solar-assisted pre-heat and waste water heat recovery components. A total of 7,488 six-day simulations are run, each representing a unique combination of technology, load size, location and season. The resulting data is presented from a variety of angles, including the relative impacts of water heater rating, additional technology type, location and season on the SEF of the system. The interplay between SEF and carbon dioxide production is also examined. These two factors are proposed as the basis for devising performance tiers by which to rank water heating systems. Two proposals are made regarding how these tiers might be organized based on the data presented here, though any tiers will have to be re-evaluated pending data on a wider range of technology combinations. A brief financial analysis is also offered, exploring the potential payback period for various technology combinations in each location. Given current equipment and energy costs, the financial savings garnered by the increase in energy efficiency are not, in most cases, found to be sufficient to justify the expense to the homeowner from a purely fiscal perspective. Additional changes would need to take place to ensure the financial viability of these technologies before large-scale adoption of systems-based standards could be employed. / Graduate

In the summer of 2007, a single neighbourhood in downtown Toronto contributed at least 13 percent of all residential grid???tie solar photovoltaic (PV) systems sold in the Canadian province of Ontario. On average, PV purchaser households produced 37 percent as much electricity as they consumed. This research investigates solar energy adoption in a community case study. Specifically, it investigates why some residents who sign up for a solar resource assessment through a community solar energy initiative (CSEI) decide to purchase, and others decide not to purchase in the short???term. Characteristics and perceptions of potential adopters are analyzed to better understand their motivations and barriers to adoption. Community energy projects became an official public policy goal in Ontario, with the passing of the Green Energy and Green Economy Act in 2009. Approximately 80 percent of Ontario???s anticipated generation capacity will need to be built, replaced or refurbished within 15 years. In this context, the Ontario Ministry of Energy, Ontario Power Authority, and Deloitte (one of Canada???s leading professional services firms), have partnered with a ???green benefit??? fund, the Community Power Fund, to help local community groups access resources to develop and establish renewable energy projects. Understanding solar energy adoption in a community context is therefore important to improve the effectiveness of such policies, including the disbursement of multi???million dollar grant funds. Differences between purchasers and non???purchasers in respect of adoption behaviour were found in this study to cluster around two general themes. The first theme concerns differences in compatibility of both the concept of solar energy systems, and their physical attributes, with characteristics of potential adopter households. Some compatibility issues are straightforward, e.g. availability of roof space with a southern orientation. Others are more complex, involving several interrelated perceptual and socio???demographic factors. For instance, while both purchasers and non???purchasers rated cost as a very important barrier, purchasers rated the motivation of solar energy systems to reduce climate change higher relative to the barrier of high financial costs than did non???purchasers. Purchasers were also more likely to possess a graduate degree, while non???purchasers were more likely to hold a professional degree. The second general theme relates to potential adopters??? trust and stake in the ability of the community???based initiative to reduce barriers in the adoption process. Since two types of solar energy systems are considered in the case study???PV and thermal (hot water)???differences are explored between each of three respondent groups: solar PV purchasers, solar hot water (SHW) purchasers, and non???purchasers. iv Surveys were used to gather data on adopter perceptions and characteristics. A participatory research design helped identify the research topic. Two main bodies of literature???community???based social marketing (CBSM) and diffusion of innovations theory???were drawn upon to conceptualize the adoption process and interpret the survey findings. These include five models of human behaviour that can be used to guide the design of CBSM campaigns. Diffusion theory was used as a basis for discussing ???perceived innovation attributes???. The study takes an integrated approach by considering both social and technical aspects of solar energy adoption, together with the issues of fuel substitution and household electricity demand.