<p>Dimerization and oligomerization reactions of alkenes are promising catalytic strategies to convert light alkenes, which can be derived from light alkane hydrocarbons (ethane, propane, butane) abundant in shale gas resources, into heavier hydrocarbons used as chemical intermediates and transportation fuels. Nickel cations supported on aluminosilicate zeotypes (zeolites and molecular sieves) selectivity catalyze ethene dimerization over oligomerization given their mechanistic preference for chain termination over chain propagation, relative to other transition metals commonly used for alkene oligomerization and polymerization reactions. Ni-derived sites initiate dimerization catalytic cycles in the absence of external activators or co-catalysts, which are required for most homogeneous Ni complexes and Ni²⁺ cations on metal organic frameworks (MOFs) that operate according to the coordination-insertion mechanism, but are not required for homogeneous Ni complexes that operate according to the metallacycle mechanism. Efforts to probe the mechanistic details of ethene dimerization on Ni-containing zeotypes are further complicated by the presence of residual H⁺ sites that form a mixture of 1-butene and 2-butene isomers in parallel acid-catalyzed pathways, as expected for the coordination-insertion mechanism but not for the metallacycle mechanism. As a result, the mechanistic origins of alkene dimerization on Ni cations have been ascribed to both the coordination-insertion and metallacycle-based cycles. Further, different Ni site structures such as exchanged Ni²⁺, grafted Ni²⁺ and NiOH⁺ cations are proposed as precursors to the dimerization active sites, based on analysis of kinetic data measured in different kinetic regimes and corrupted by site deactivation, leading to unclear and contradictory proposals of the effect of Ni precursor site structures on dimerization catalysis.</p> <p> Dimerization of ethene (453 K) was studied on Ni cations exchanged within Beta zeotypes in the absence of externally supplied activators, by suppressing the catalytic contributions of residual H⁺ sites via selective pre-poisoning with Li⁺ cations and using a zincosilicate support that contains H⁺ sites of weaker acid strength than those on aluminosilicate supports. Isolated Ni²⁺ sites were predominantly present, consistent with a 1:2 Ni²⁺:Li⁺ ion-exchange stoichiometry, CO infrared spectroscopy, diffuse reflectance UV-Visible spectroscopy and <i>ex-situ</i> X-ray absorption spectroscopy. Isobutene serves a kinetic marker for alkene isomerization reactions at H⁺ sites, which allows distinguishing regimes in which 2-butene isomers formed at Ni sites alone, or from Ni sites and H⁺ sites in parallel. 1-butene and 2-butenes formed at Ni sites were not equilibrated and their distribution was invariant with ethene site-time, revealing the primary nature of butene double-bond isomerization at Ni sites as expected from the coordination-insertion mechanism. <i>In-situ</i> X-ray absorption spectroscopy showed that the Ni oxidation state was 2+ during dimerization, also consistent with the coordination-insertion mechanism. Moreover, butene site-time yields measured at dilute ethene pressures (<0.4 kPa) increased with time-on-stream (activation transient) during initial reaction times, and this activation transient was eliminated at higher ethene pressures (≥ 0.4 kPa) and while co-feeding H₂. These observations are consistent with the <i>in-situ</i> formation of [Ni(II)-H]⁺ intermediates involved in the coordination-insertion mechanism, as verified by H/D isotopic scrambling and H₂-D₂ exchange experiments that quantified the number of [Ni(II)-H]⁺ intermediates formed.</p> <p> The prevalence of the coordination-insertion cycles at Ni²⁺ cations provides a framework to interpret the kinetic consequences of the structure of Ni²⁺ sites that are precursors to the dimerization active sites. Beta zeotypes predominantly containing either exchanged Ni²⁺ cations or grafted Ni²⁺ cations show noteworthy differences for ethene dimerization catalysis. The deactivation transients for butene site-time yields on exchanged Ni²⁺ cations indicate two sites are involved in each deactivation event, while those for grafted Ni²⁺ cations indicate involvement of a single site. The site-time yields of butenes extrapolated to initial time, and then further extrapolated to zero ethene site-time, rigorously determined initial ethene dimerization rates (453 K, per Ni) that showed a first-order dependence in ethene pressure (0.05-1 kPa). This kinetic dependence implies the β-agostic [Ni(II)-ethyl]⁺complex to be the most abundant reactive intermediate for the Beta zeolites containing exchanged and grafted Ni²⁺ cations. Further, the apparent first-order dimerization rate constant was two orders of magnitude higher for exchanged Ni²⁺ cations than for grafted Ni²⁺ cations, reflecting differences in ethene adsorption or dimerization transition state free energies at these two types of Ni sites. </p> <p> The presence of residual H⁺ sites on aluminosilicate zeotypes, in addition to the Ni²⁺ sites, causes formation of saturated hydrocarbons and oligomers that are heavier than butenes and those containing odd numbers of carbon atoms. The reaction pathways on Ni²⁺ and H⁺ sites are systematically probed on a model Ni-exchanged Beta catalyst that forms a 1:1 composition of these sites <i>in-situ</i>. The quantitative determination of apparent deactivation orders for the decay of product space-time yields provides insights into the site origins of the products formed. Further, Delplot analysis systematically identifies the primary and secondary products in the reaction network. This strategy shows linear butene isomers to be primary products formed at Ni²⁺-derived sites, while isobutene is formed as a secondary product by skeletal isomerization at H⁺ sites. In addition, propene is formed as a secondary product, purportedly by cross-metathesis between linear butene isomers and the reactant ethene at Ni²⁺-derived sites. Also, ethane is a secondary product that forms by hydrogenation of ethene at H⁺ sites, with the requisite H₂ generated <i>in-situ</i> likely by dehydrogenation and aromatization of ethene at H⁺ sites.</p> <a>The predominance of the coordination-insertion mechanism at Ni²⁺-derived sites implies kinetic factors influence isomer distributions within the dimer products, providing an opportunity to influence the selectivity toward linear and terminal alkene products of dimerization. In the case of bifunctional materials, reaction pathways on the Ni²⁺ and H⁺sites dictate the interplay between kinetically-controlled product selectivity at Ni sites and thermodynamic preference of product isomers formed at the H⁺ sites. </a>In summary, through synthesis of control catalytic materials and rigorous treatment of transient kinetic data, this work presents a detailed mechanistic understanding of the reaction pathways at the Ni²⁺ and H⁺ sites, stipulating design parameters that have predictable consequences on the product composition of alkene dimerization and oligomerization.

Two new mesoporous metal–organic frameworks (DUT-75 and DUT-76) with exceptional ethene uptake were obtained using carbazole dicarboxylate based metal–organic polyhedra as supermolecular building blocks. The compounds have a total pore volume of 1.84 and 3.25 cm³ gˉ¹ and a specific BET surface area of 4081 and 6344 m² gˉ¹, respectively, and high gas uptake at room temperature and high pressure.

Title Interaction of Organic Molecules with Metal Passivated Silicon Surfaces Studied via STM Author Petr Zimmermann Department Department of Plasma and Surface Science Supervisor Doc. RNDr. Pavel Sobotík, CSc. Department of Plasma and Surface Science Abstract Organic molecules offer a wide range of optical, electronic or chemical properties. Coupling them to silicon could pave way to novel applications and devices, however, a controlled molecular functionalization of silicon remains challenging due to the presence of highly reactive dangling bonds on its surfaces. We attempt to decrease the reactivity of low index silicon surfaces with an ultra-thin layer of a metal adsorbates and study their interaction with organic molecules via scanning tunnelling microscopy. In the first part we investigate the interaction of ethylene, a small unsaturated molecule, with tin and indium 1D chains grown on Si(001) - 2 × 1. The chains consist of dimers structurally analogous to the dimers of the underlying Si(001) - 2 × 1 surface. Aided by photoelectron spectroscopy we find that the Sn chains are less reactive than the Si(001) surface and that the absence of a π dimer bond renders indium chains inert. In the second part we study the interaction of copper phthalocyanine, a small macrocyclic heteroaromatic compound, with the...

The proton exchange membrane fuel cell generates electricity from hydrogen and oxygen (from air) through electrocatalytic reactions in an electrochemical cell. The Pt/C catalyst, commonly used in PEM fuel cells, is very sensitive to impurities that can interact with the active catalyst sites and limit fuel cell performance. Unfortunately, most hydrogen is currently produced from fossil sources, and inevitably contains impurities. The subject of this thesis is the effect of hydrogen impurities on the operation of a PEM fuel cell using a Pt/C anode. The impurities studied are carbon monoxide (CO), carbon dioxide (CO2), and selected hydrocarbons. Particular focus is given to the interaction between the impurities studied and the anode catalyst. The main method used in the study involved performing cyclic voltammetry and mass spectrometry, simultaneously. Other electrochemical techniques are also employed. The results show that all the impurities studied adsorb to some extent on the Pt/C catalyst surface, and require potentials comparable to that of CO oxidation, i.e., about 0.6V, or higher to be removed by oxidation to CO2. For complete oxidation of propene, and toluene, potentials of above 0.8, and 1.0V, respectively, are required. The unsaturated hydrocarbons can be desorbed to some extent by reduction, but oxidation is required for complete removal. Adsorption of ethene, propene, and CO2 is dependent on the presence of adsorbed or gaseous hydrogen. Hydrogen inhibits ethene and propene adsorption, but facilitates CO2 adsorption. Adsorption of methane and propane is very limited and high concentrations of methane cause dilution effects only. The adlayer formed on the Pt/C anode catalyst in the presence of CO2, or moderate amounts of hydrocarbons, is found to be insffuciently complete to notably interfere with the hydrogen oxidation reaction. Higher concentrations of toluene do, however, limit the reaction. / Polymerelektrolytbränslecellen genererar elektricitet fran vätgas och syrgas (fran luft) genom elektrokatalytiska reaktioner i en elektrokemisk cell. Den platina-baserade katalysator som oftast används i dessa bränsleceller är känslig mot föroreningar, då dessa kan interagera med katalysatorns aktiva yta, och därmed begränsna bränslecellens prestanda. Tyvärr produceras dagens vätgas huvudsakligen fran fossila källor och innehåller därför oundvikligen föroreningar. Denna avhandling behandlar hur olika vätgasföroreningar påverkar katalysatorns aktivitet och bränslecellens drift. De föroreningar som studeras är kolmonoxid (CO) och koldioxid (CO2), samt ett antal mindre kolväten. Störst fokus ligger på hur dessa föroreningar interagerar med anodens Pt/C katalysator. Den metod som huvudsakligen används är cyklisk voltammetri kombinerat med masspektrometri, men flera elektrokemiska metoder har använts. Resultaten visar att alla undersökta föroreningar adsorberar på Pt/C katalysatorns yta i större eller mindre utstreckning. For att avlägsna det adsoberade skiktet genom oxidation till CO2 krävs potentialer jämförbara med CO oxidation, dvs ca 0,6V, eller högre. Fullständig oxidation av propen eller toluen kräver potentialer högre än 0,8V respektive 1,0V. De omättade kolvätena kan delvis avlägsnas genom reduktion, men fullständig avlägsning kräver oxidation. Närvaron av väte, i gasform eller adsorberat pa katalysatorn, hämmar adsorptionen av eten och propen, men främjar CO2 adsorption. Metan och propan adsorberar i mycket begränsad utstreckning på Pt/C katalysatorns yta. De prestandaförluster som uppstår av höga koncentrationer av metan förklaras av utspädning av vätgasen. Det adsorberade skiktet som bildas när Pt/C katalysatorn exponeras för CO2 eller måttliga koncentrationer av studerade kolväten, är inte tillräckligt heltäckande for att märkbart påverka vätgasreduktionen. Däremot kan höga koncentrationer av toluen begränsa reaktionen. / <p>QC 20161010</p>

L'objectif de ces travaux était de synthétiser, caractériser et étudier le potentiel d'une sélection de liquides ioniques, pour la séparation de l'éthane et de l'éthène. L'influence dans l'absorption de l'éthène de la présence de trois cations métalliques, le lithium (I), le nickel (II) et le cuivre (II) dans un liquide ionique était également étudiée. Les liquides ioniques sélectionnés sont basés sur le cation imidazolium contenant des groupes fonctionnels au niveau de la chaine alkyle latérale. Les anions choisis sont le bis(trifluorométhylsulfonyl)imide, [NTf2], la dicyanamide, [DCA] et le méthylphosphite, [C1HPO3]. Sachant qu'un solvant de séparation idéale doit avoir une capacité d'absorption et une sélectivité de séparation élevées, une faible viscosité, une haute stabilité thermique et une cinétique d'absorption rapide pour le gaz sélectionné. Pour évaluer ces propriétés pour les milieux sélectionnés, plusieurs paramètres ont été déterminés la densité et la viscosité des liquides ioniques ainsi que l'absorption de chaque gaz dans les liquides ioniques. L'absorption de l'éthane et de l'éthène dans les liquides ioniques purs ainsi que dans les solutions de liquide ionique + sel métallique a été mesurée dans une gamme de températures comprises entre 303.15 K et 353.15 K et pour des pressions proches de l'atmosphérique. La sélectivité idéale des liquides ioniques pour l'absorption de l'éthane par rapport à l'éthène a ainsi pu être déterminée. La détermination de l'absorption en fonction de la température a permis d'accéder aux propriétés thermodynamiques de solvatation de ces gaz dans des liquides ioniques et à comprendre la manière dont les liquides ioniques interagissent avec ces solutés comment les liquides ioniques se structurent autour de ces molécules / The goal of this research was to synthesize, characterize and study the potential of selected ionic liquids as solvents for the separation of ethane and ethene. The influence on ethene absorption of the presence of three different metallic cations, lithium (I), nickel (II) and copper (II) in an ionic liquid was also studied. The selected ionic liquids are based in the imidazolium cation containing a functionalization in the alkyl side chain. The chosen anions were the bis(trifluorosulfonyl)imide, [NTf2], the dicyanamide, [DCA] and the methylphosphite, [C1HPO3]. Several parameters were taken into account for this primary evaluation, such as measurements of density, viscosity and absorption of each gas in the ionic liquids, since an ideal separation solvent should have a high absorption capacity and gas selectivity, low viscosity, high thermal stability and fast absorption kinetics for the selected gas. The absorption of the 2 gases in the pure ionic liquids and ionic liquid + metallic salt solutions was measured in the temperature range between 303.15 K and 353.15 K and for pressures close to atmospheric. The ideal selectivity of the ionic liquid for the absorption of ethane compared to ethene was determined. The determination of the gas solubility in function of the temperature allowed access to the thermodynamic properties of solvation of the gases in the ionic liquids, and a deeper understanding of the gas-ionic liquid interactions and the structure of the solution

No description available.

No description available.

No description available.