31 |
Návrh duální tiskové hlavy pro FDM 3D tiskárnu / Design of dual hot-end for FDM 3D printerProuza, Tomáš January 2016 (has links)
This master thesis is focused on a research in the field of 3D printing technology. During the research a particular technology, being regularly applied by the RepRap printers, is described. Mentioned technology is tested on a Rebel II printer model. The findings are applied to the dual 3D extruder design project. This dual 3D extruder is designed and made in two basic options, where the first option discovers the shortcomings and the second option is modified and tested. In the following step, assessment of applicability, functionality, as well as economic analysis of production of this dual 3D extruder is made.
|
32 |
Melt Processing Fabrication and Characterization of Functional Nanocomposites of Linear Low-Density Polyethylene/Halloysite NanotubeBaheri, Bahareh 23 May 2022 (has links)
No description available.
|
33 |
SOLVENT FREE EMULSIFICATION IN A TWIN-SCREW EXTRUDERLawton, David J.W. 21 September 2014 (has links)
<p>The production of latex in a solvent-free process within a twin screw extruder is of great industrial interest given the associated reduction in environmental impact when compared to conventional solvent-based emulsification techniques. The ability to produce latex continuously is also advantageous, compared to batch-wise solvent-based processes.</p> <p>The process of solvent-free emulsification in a twin screw extruder is studied. An inline fiber optic spectroscopic system was installed in the extruder to study the residence time distribution profile of resin through the emulsification process. A design of experiment study was performed analyzing the response of latex particle size from screw speed and feed rate factors. Finally, scanning electron microscopy was used to determine the morphology of the poorly- emulsified and pre-emulsified resin.</p> <p>Experimental results demonstrate that the residence time distribution of the polymer within the extruder is largely invariant of screw speed; the system also demonstrated a very low degree of axial mixing – which was not expected but can be attributed to high degree-of-fill within the screw. The results of the design of experiments study show that the final latex particle size is more influenced by the feed rate of the polymer than the screw speed of the extruder. These results were found to be consistent with the literature based on both batch- phase inversion emulsification as well as continuous polymer blending of immiscible phases. Finally, results from a study on morphology provided evidence of water domains within the pre-inverted polymer domains, analogous to a ‘water-in-oil-in water’ dispersion. Evidence of a bicontinuous network of polymer and water was also found to exist. The summation of these experimental results leads to the hypothesis that the solvent-free emulsification process is a phase inversion-type emulsification mechanism as opposed to a direct emulsification mechanism.</p> / Master of Applied Science (MASc)
|
34 |
DEM simulation of a single screw granulator: The effect of liquid binder on granule propertiesArthur, Tony B., Sekyi, Nana, Rahmanian, Nejat 25 January 2024 (has links)
Yes / The Caleva UK single-screw Variable Density Extruder (VDE) is a continuous powder processing equipment known for spheronization and extrusion. Its suitability for granulation remains uncertain, a common challenge in powder processing industries that deal with granules, pellets, and tablets. This study investigates the VDE's potential for granulation, using 65 µm CaCO3 powder and PEG 4000 as a liquid binder. In order to replicate several experimental setups with varying binder concentrations and liquid-to-solid ratios (L/S) of 0.1 and 0.15, eight DEM simulations were run. Our results indicate that higher binder concentrations yield more consistent products with fewer fines, while lower concentrations result in inconsistent products with increased fines. Low L/S ratios produce fragile, fine-sized products with a broad particle size distribution (PSD). DEM simulations reveal a direct relationship between liquid binder content and contact forces. Analysis of bonds formed, and particle counts in simulations corroborates experimental observations of fines production. Additionally, granule strength appears to be directly proportional to contact force. / Special gratitude is given to Ghana Scholarship Secretariat for providing the necessary funding for this research. / The full-text of this article will be released for public view at the end of the publisher embargo on 23 Jan 2025.
|
35 |
Translating solid state organic synthesis from a mixer mill to a continuous twin screw extruderCao, Q., Howard, J.L., Crawford, Deborah E., James, S.L., Browne, D.L. 13 February 2020 (has links)
Yes / A study on the translation of a solid-state synthetic reaction from a mechanochemical mixer-mill to a continuous twin-screw extruder is discussed herein. The study highlights some considerations to be made and parameters to be tested in the context of a model fluorination reaction, which is the first organic fluorination to be attempted using extrusion. Upon optimization, which features the first use of grinding auxiliary solids to enable effective synthetic extrusion, the difluorination reaction was successfully translated to the extruder, leading to a 100-fold improvement in Space Time Yield (STY); 29 kg m−3 day−1 in a mixer mill to 3395 kg m−3 day−1 in a twin screw extruder. / D. L. B is grateful to the EPSRC for a First Grant (D. L. B. EP/P002951/1), CRD for a studentship award to J. L. H., Queen’s University Belfast for a Visiting Research Fellowship and the School of Chemistry at Cardiff University for generous support. S. L. J. is grateful to EPSRC for support (EP/L019655/1).
|
36 |
Investigation of the Temperature Homogeneity of Die Melt Flows in Polymer ExtrusionAbeykoon, Chamil, Martin, P.J., Kelly, Adrian L., Li, K., Brown, Elaine, Coates, Philip D. January 2014 (has links)
No / Polymer extrusion is fundamental to the processing of polymeric materials and melt flow temperature homogeneity is a major factor which influences product quality. Undesirable thermal conditions can cause problems such as melt degradation, dimensional instability, weaknesses in mechanical/optical/geometrical properties, and so forth. It has been revealed that melt temperature varies with time and with radial position across the die. However, the majority of polymer processes use only single-point techniques whose thermal measurements are limited to the single point at which they are fixed. Therefore, it is impossible for such techniques to determine thermal homogeneity across the melt flow. In this work, an extensive investigation was carried out into melt flow thermal behavior of the output of a single extruder with different polymers and screw geometries over a wide range of processing conditions. Melt temperature profiles of the process output were observed using a thermocouple mesh placed in the flow and results confirmed that the melt flow thermal behavior is different at different radial positions. The uniformity of temperature across the melt flow deteriorated considerably with increase in screw rotational speed while it was also shown to be dependent on process settings, screw geometry, and material properties. Moreover, it appears that the effects of the material, machine, and process settings on the quantity and quality of the process output are heavily coupled with each other and this may cause the process to be difficult to predict and variable in nature. (C) 2013 Society of Plastics Engineers
|
37 |
Thermal homogeneity and energy efficiency in single screw extrusion of polymers. The use of in-process metrology to quantify the effects of process conditions, polymer rheology, screw geometry and extruder scale on melt temperature and specific energy consumptionVera-Sorroche, Javier January 2014 (has links)
Polymer extrusion is an energy intensive process whereby the simultaneous action of viscous shear and thermal conduction are used to convert solid polymer to a melt which can be formed into a shape. To optimise efficiency, a homogeneous melt is required with minimum consumption of process energy. In this work, in-process monitoring techniques have been used to characterise the thermal dynamics of the single screw extrusion process with real-time quantification of energy consumption. Thermocouple grid sensors were used to measure radial melt temperatures across the melt flow at the entrance to the extruder die. Moreover, an infrared sensor flush mounted at the end of the extruder barrel was used to measure non-invasive melt temperature profiles across the width of the screw channel in the metering section of the extruder screw. Both techniques were found to provide useful information concerning the thermal dynamics of the extrusion process; in particular this application of infrared thermometry could prove useful for industrial extrusion process monitoring applications.
Extruder screw geometry and extrusion variables should ideally be tailored to suit the properties of individual polymers but in practise this is rarely achieved due the lack of understanding. Here, LDPE, LLDPE, three grades of HDPE, PS, PP and PET were extruded using three geometries of extruder screws at several set temperatures and screw rotation speeds.
Extrusion data showed that polymer rheology had a significant effect on the thermal efficiency on the extrusion process. In particular, melt viscosity was found to have a significant effect on specific energy consumption and thermal homogeneity of the melt.
Extruder screw geometry, set extrusion temperature and screw rotation speed were also found to have a direct effect on energy consumption and melt consistency. Single flighted extruder screws exhibited poorer temperature homogeneity and larger fluctuations than a barrier flighted screw with a spiral mixer. These results highlighted the importance of careful selection of processing conditions and extruder screw geometry on melt homogeneity and process efficiency.
Extruder scale was found to have a significant influence on thermal characteristics due to changes in surface area of the screw, barrel and heaters which consequently affect the effectiveness of the melting process and extrusion process energy demand. In this thesis, the thermal and energy characteristics of two single screw extruders were compared to examine the effect of extruder scale and processing conditions on measured melt temperature and energy consumption. Extrusion thermal dynamics were shown to be highly dependent upon extruder scale whilst specific energy consumption compared more favourably, enabling prediction of a process window from lab to industrial scale within which energy efficiency can be optimised.
Overall, this detailed experimental study has helped to improve understanding of the single screw extrusion process, in terms of thermal stability and energy consumption. It is hoped that the findings will allow those working in this field to make more informed decisions regarding set conditions, screw geometry and extruder scale, in order to improve the efficiency of the extrusion process. / Engineering and Physical Sciences Research Council
|
38 |
Thermal optimisation of polymer extrusion using in-process monitoring techniquesVera-Sorroche, Javier, Kelly, Adrian L., Brown, Elaine, Coates, Philip D., Karnachi, N., Harkin-Jones, E., Li, K., Deng, J. January 2013 (has links)
No / Polymer extrusion is an energy intensive process, which is often run at less than optimal conditions. The extrusion process consists of gradual melting of solid polymer by thermal conduction and viscous shearing between a rotating screw and a barrel; as such it is highly dependent upon the frictional, thermal and rheological properties of the polymer. Extruder screw geometry and extrusion variables should ideally be tailored to suit the properties of individual polymers, but in practice this is rarely achieved due to the lack of understanding of the process. Here, in-process monitoring techniques have been used to characterise the thermal dynamics of the extrusion process. Novel thermocouple grid sensors have been used to measure melt temperature fields within flowing polymer melts at the entrance to an extruder die in conjunction with infra-red thermometers and real-time quantification of energy consumption. A commercial grade of polyethylene has been examined using three extruder screw geometries at different extrusion operating conditions to understand the process efficiency. Extruder screw geometry, screw rotation speed and set temperature were found to have a significant effect on the thermal homogeneity of the melt and process energy consumed. (C) 2012 Elsevier Ltd. All rights reserved.
|
39 |
Processamento de compósitos de poli (tereftalato de etileno) reciclado reforçado com fibras de vidroMondadori, Nilcéa Mares da Luz 28 August 2007 (has links)
Neste trabalho, compósitos de PET sob a forma de flake e pós-condensado foram preparados com teores diferenciados de fibra de vidro (0, 20, 30 e 40%). Dois tipos de fibra foram utilizados: uma fibra com tratamento superficial a base de amino-silano e outra com tratamento a base de epóxi-silano. Os compósitos foram extrusados em extrusora mono-rosca, utilizando uma rosca de filete duplo com barreira, e em extrusora dupla-rosca interpenetrante co-rotacional. Após extrusão, os compósitos foram injetados a 120 ºC que, após várias temperaturas testadas, foi a temperatura que conferiu maior grau de cristalinidade do artefato final (acima de 30%). Os compósitos foram caracterizados quanto às propriedades mecânicas, térmicas e morfológicas. Os resultados mostraram que com a utilização de uma mono-rosca apropriada ao processamento de PET com fibra de vidro foi possível produzir compósitos com boas propriedades, comparáveis aos obtidos em extrusora dupla-rosca. Em relação aos tipos de PET utilizados, verificou-se que a massa molar da matriz polimérica, maior para o PET pós-condensado, teve uma pequena influência no desempenho das propriedades analisadas. Porém foi observado que os resultados foram indiferentes ao tratamento superficial das fibras testadas. Através da determinação do comprimento das fibras por análise óptica, e dos resultados experimentais do módulo de tração dos compósitos, pode-se constatar que nos compósitos injetados as fibras estão orientadas no sentido longitudinal à deformação. Com a microscopia eletrônica de varredura verificou-se que há sempre uma melhor distribuição e dispersão das fibras, com menores vazios à medida que aumenta o teor de fibras, corroborando os resultados mecânicos, sempre crescentes com o teor incorporado. A cristalinidade obtida nos corpos de prova moldados por injeção com o molde a uma temperatura de 120 ºC, aliada à presença da fibra de vidro, leva a um aumento na temperatura de distorção térmica (HDT). As análises de raios-X mostraram que com o aumento da quantidade da fibra, os picos cristalinos característicos do PET perdem definição, o que está associado à característica amorfa da fibra. / Submitted by Marcelo Teixeira (mvteixeira@ucs.br) on 2014-05-15T17:17:43Z
No. of bitstreams: 1
Dissertacao Nilcea Mondadori.pdf: 5475607 bytes, checksum: 3b5580025f75099d47502055cd80fde5 (MD5) / Made available in DSpace on 2014-05-15T17:17:43Z (GMT). No. of bitstreams: 1
Dissertacao Nilcea Mondadori.pdf: 5475607 bytes, checksum: 3b5580025f75099d47502055cd80fde5 (MD5) / In this work, flake and post-condensed PET composites of different glass fiber contents (0, 20, 30 and 40%) were prepared. Tow kinds of fibers were employed: one fiber having an amino silane-based surface treatment and another one having an epoxi silane-based surface treatment. The composites were extruded in a single-screw extruder with a barrier double-flight screw, and in a co-rotating interpenetrating twin-screw extruder. After extrusion the composites were injected at 120°C, this temperature being chosen after several tests indicating that it could promote the highest possible degree of crystallinity of the final product (higher than 30%). The composites were characterized as for mechanical, thermal and morphological features. Data indicate that by using a single-screw extruder proper to the processing of PET and fiber glass the properties of the obtained composites are fairly good, being comparable to those obtained from a twin-screw extruder. As for the types of PET utilized, it could be found that the molar mass of the polymeric matrix, larger for the post-condensed PET had some influence on the performance of the tested properties. On the other hand it could be observed that the surface treatment of the fibers does not influence the obtained data. Based on the optical analysis of the fiber length and the elastic modulus data it is possible to determine that the fibers of the injected composites are oriented longitudinally to the strain direction. With the aid of scanning electron microscopy (SEM), improvements in the distribution and dispersion of the fibers were always observed, with smaller voids as the fiber content increases, backing higher mechanical data as the incorporated fiber content is increased. Crystallinity resulting from injection-molded test specimens processed at 120°C, together with the presence of the glass fiber leads to a synergism in the heat distortion temperature (HDT). X-rays analyses indicate that at higher fiber content the composites show lower definition of the crystalline peaks, this being associated to the amorphous feature of the fiber.
|
40 |
Processamento de compósitos de poli (tereftalato de etileno) reciclado reforçado com fibras de vidroMondadori, Nilcéa Mares da Luz 28 August 2007 (has links)
Neste trabalho, compósitos de PET sob a forma de flake e pós-condensado foram preparados com teores diferenciados de fibra de vidro (0, 20, 30 e 40%). Dois tipos de fibra foram utilizados: uma fibra com tratamento superficial a base de amino-silano e outra com tratamento a base de epóxi-silano. Os compósitos foram extrusados em extrusora mono-rosca, utilizando uma rosca de filete duplo com barreira, e em extrusora dupla-rosca interpenetrante co-rotacional. Após extrusão, os compósitos foram injetados a 120 ºC que, após várias temperaturas testadas, foi a temperatura que conferiu maior grau de cristalinidade do artefato final (acima de 30%). Os compósitos foram caracterizados quanto às propriedades mecânicas, térmicas e morfológicas. Os resultados mostraram que com a utilização de uma mono-rosca apropriada ao processamento de PET com fibra de vidro foi possível produzir compósitos com boas propriedades, comparáveis aos obtidos em extrusora dupla-rosca. Em relação aos tipos de PET utilizados, verificou-se que a massa molar da matriz polimérica, maior para o PET pós-condensado, teve uma pequena influência no desempenho das propriedades analisadas. Porém foi observado que os resultados foram indiferentes ao tratamento superficial das fibras testadas. Através da determinação do comprimento das fibras por análise óptica, e dos resultados experimentais do módulo de tração dos compósitos, pode-se constatar que nos compósitos injetados as fibras estão orientadas no sentido longitudinal à deformação. Com a microscopia eletrônica de varredura verificou-se que há sempre uma melhor distribuição e dispersão das fibras, com menores vazios à medida que aumenta o teor de fibras, corroborando os resultados mecânicos, sempre crescentes com o teor incorporado. A cristalinidade obtida nos corpos de prova moldados por injeção com o molde a uma temperatura de 120 ºC, aliada à presença da fibra de vidro, leva a um aumento na temperatura de distorção térmica (HDT). As análises de raios-X mostraram que com o aumento da quantidade da fibra, os picos cristalinos característicos do PET perdem definição, o que está associado à característica amorfa da fibra. / In this work, flake and post-condensed PET composites of different glass fiber contents (0, 20, 30 and 40%) were prepared. Tow kinds of fibers were employed: one fiber having an amino silane-based surface treatment and another one having an epoxi silane-based surface treatment. The composites were extruded in a single-screw extruder with a barrier double-flight screw, and in a co-rotating interpenetrating twin-screw extruder. After extrusion the composites were injected at 120°C, this temperature being chosen after several tests indicating that it could promote the highest possible degree of crystallinity of the final product (higher than 30%). The composites were characterized as for mechanical, thermal and morphological features. Data indicate that by using a single-screw extruder proper to the processing of PET and fiber glass the properties of the obtained composites are fairly good, being comparable to those obtained from a twin-screw extruder. As for the types of PET utilized, it could be found that the molar mass of the polymeric matrix, larger for the post-condensed PET had some influence on the performance of the tested properties. On the other hand it could be observed that the surface treatment of the fibers does not influence the obtained data. Based on the optical analysis of the fiber length and the elastic modulus data it is possible to determine that the fibers of the injected composites are oriented longitudinally to the strain direction. With the aid of scanning electron microscopy (SEM), improvements in the distribution and dispersion of the fibers were always observed, with smaller voids as the fiber content increases, backing higher mechanical data as the incorporated fiber content is increased. Crystallinity resulting from injection-molded test specimens processed at 120°C, together with the presence of the glass fiber leads to a synergism in the heat distortion temperature (HDT). X-rays analyses indicate that at higher fiber content the composites show lower definition of the crystalline peaks, this being associated to the amorphous feature of the fiber.
|
Page generated in 0.0658 seconds