This diploma thesis deals with the design of a new building of the municipal office building in Bludov, at the level of design documentation for the construction. The building consists mainly of offices for the operation of the municipal office, on the first floor there is a municipal library for the public. The building is designed on a slightly sloping plot with entrance from the east side. The building consists of three above-ground floors and one underground floor. Design documentation for building construction is processed in the computer program ArchiCAD.

Subject of this thesis is elaboration study and project documentation of new firehouse building type P in Polná. New firehouse building is designed instead of the original firehouse, which was in poor technical condition and didn’t meet the new requirements. The firehouse is situated on the plot number 91/5 with adjacent numbers 91/11, 91/10, 91/7, 91/8, 91/9, 91/6, 2684, 2693. The land is slightly sloping. The building is detached, partially basement and with three aboveground floors. The vertical load-bearing structure in the basement consists of masonry from permanent formwork and in the aboveground floors the sand-lime masonry YTONG SILKA. Horizontal load-bearing structures are designed from prestressed panels Spiroll. The roof is designed as single-skin flat roof with a poured cementitious foam layer. Firehouse consists of two parts – administrative-operational part and garage of emergency vehicles with appropriate stores. The main entrance and exit of vehicles are situated southwest. The administrative of firehouse is on the 3rd floor. Fire brigade rooms are on the 2nd floor, locker rooms with clothing stores are on the 1st floor. The technical background is designed on the underground floor. Garage parking space is situated over two floors and is roofed by flat single-skin roof. Project documentation is designed according applicable laws, decrees, regulations and technical standards.

This final thesis is about the object of civic amenities. This office building have three levels above ground and basement under the whole area of building. The structural system of the object is reinforced concrete frames in both directions. Object is designed as building with two wings and the middle narrowed part for communication. Building has flat roof and shelter for parking cars with one part used as terrace for café. Object is built on slightly sloped ground from south to north.

The subject of my diploma thesis is the elaboration of an architectural study and project documentation for the construction of a detached house building. The new building is located on the outskirts of slavkov, in the district of Opava. It is a three-storey non-cellar building with vertical structures in the Porotherm system, monolithic reinforced concrete ceilings and a single-skin flat roof, vegetation. Ten apartments and four separate rooms are designed in the building and wellness is designed in the first floor.

Master´s thesis premises designed Health centre Sadová on the level of documentary for execution of works. The building has thirteen medical equipment with facilities, pharmacy, health food store, optics and refreshment. The building is simply-shaped, with four above-ground floors and basement. The structural systém is cast-in-place concrete frame. The infill wall in basement is walled with permanent formwork blocks and the ground floors are walled with clay blocks. Floor structures are cast-in-place reinforced concrete. Roof structure is designed like flat roof. The building has thermal insulation and cladding with fibre cement board.

This diploma thesis deals with design of new building multifunctional house in southeastern outskirts of Brno in urban district Holásky. The three-storey building combines purpose of permanent housing, stomatology center and pharmacy. Business premises and technical facilities are located on the ground floor. Overall twelve dwelling units with layout design as one-bedroom flat and two-bedroom flat are placed on above-ground floors. Designed building has rectangular trapezoid shape and copies triangle shape of flat building plot. Parking spaces are perpendicular to adjacent access road. External walls are made of 500 mm thick Porotherm hollow clay blocks with inserted mineral insulation. Ceiling structure is designed as reinforced concrete slab, which is divided into set of smaller two way slabs. Building is roofed with flat roof, on it are placed solar collectors used for water heating and reducing operating costs. Effective management of rainwater which is collected and reused helps decrease environmental impact of building. Total energy consumption of the building is reduced by building compactness. Thesis contains project documentation for the construction.

The subject of this diploma thesis is design documentation of a multifunctional building. The object is located in village of Vsetín, set in flat terrain. The building is divided to 3 objects. Objects A and C are designed as a residential buildings, object B is the office building. The multifunctional building is with basement, it has four above-ground floors and its roofed with warm flat roof. The structural system of a building is made from ceramic blocks Heluz Family 30 with etics, structures and ceillings are made of cast-in-place reinforced concrete. The part of documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.

This diploma thesis solves the design of a new hotel with restaurant. The content is the project documentation for construction work. The building is located in the cadastral territory of Vyškov. The hotel is designed for eating and short-term accommodation 58 people. Is it a two-storey and partially basement building with flat roof. In the basement there are a technical rooms and warehouses. In the first floor there are restaurant, kitchen, warehouses and offices. In the second floor there are only hotel rooms. The hotel is a detached building, the shape of the building as the letter L.

The aim of the diploma thesis is the processing of project documentation for the construction of children's hospice. The building is located in Opava, specifically in the Jaktař district. Acess to the building is from street Karafiátová on building 2121/1, 2119, 2118, 2117, 2122/1. The children's hospice is a health and social facility in which relief care and facilities for a child suffering from a serious illness will be provided. The ground plan of its object is reminiscent of a person with open arms, which leads to the hospice garden, where a memorial site will be created. The capacity of the hospice is 10 rooms for patients, which will be connected to the rooms of family members. There will also be 4 separate rooms for patients, where it will be possible to place an extra bed. The children's hospice has two above-ground and one basement. The building will be built next to the hospital in Opava and is intended to expand the services provided by palliative care not only in the Moravian-Silesian Region, but throughout the Czech Republic, in which none of these buildings is yet in operation. External walls of the basement are reinforced concrete monolithic, the rest of the external walls are made of ground brick blocks with mineral insulation. The ceiling structures of all floors are monolithic reinforced concrete slabs. The roofs of the building are flat, above the single-storey part a vegetated flat roof is designed and above the second above-ground floor there is a flat roof loaded with aggregate. There is wall structural system.

It is a multi-storey detached cultural and dining building. The theatre is dimensioned for 615 seats and the restaurant is dimensioned for 150 dishes. The construction will be situated in the town Ostrava, namely in town part Ostrava-Poruba having 64 728 inhabitants. Build-up land area is 3819 m2 and capacity amounts to 60 676 m3, it has one underground and four above-ground levels. The building is covered by green flat roof.