The diploma thesis focuses on design of a nursing home in Planá nad Lužnicí. The building is freely standing on a flat land, with three above-ground floors. The entrance to the building is solved from the northeast side of the local road, the main entrance is oriented on the northwest side. The vertical support structures are made of Heluz brick blocks and covered with a mineral wool thermal insulation system. Horizontal structures are designed as reinforced concrete slabs. The building is roofed with a single-layer flat roof.

This masters thesis deals with the drafting of project documentation of kindergarten. The block of flats is situated on flat land in the cadastral territory of Brno - Zebetin on parcel number 3195. The building has two floors and there in total 2 classes. The structural system is designed from the system Therm. Roofing flat roof with attic.

The project deals with design of a multifunctional house. The object is situated in the city called Hořice in Hradec Králové region. Terrain of the land is flat. The building consists of a basement and four floors and it has a rectangular plan. There are four shops and ten dwelling units in the house. Layout of the units is three rooms plus one room. Above one part of thrid floor is a flat roof which is made of concrete tiles and vegetation. It serves for relaxing.

The main task of the diploma thesis is the elaboration of a project for the construction of a polyfunctional building Na Skřivánek in Chotěboř. The multifunctional house has one underground and 4 aboveground floors. On the underground floor there are premises serving as technical and storage facilities, on the ground floor there is designed two offices - general practitioner and pediatrician in the central part of the floor plan. In one of the outer tracts of the building there is a business area, designed for the operation of a travel agency. There is an apartment for barrier-free use on the ground floor. On the upper floors there is a total of 8 other apartment units ranging from 2 + kk to 2 atypical maisonettes in 3rd-4th floor. Each apartment unit, in addition to the barrier-free, is equipped with a balcony or terrace located on the south side. The basement part of the building is built of concrete slabs of lost formwork, the above-ground wall part of the Porotherm brick system is heat-insulated with a contact insulation system. Ceiling structures are made of pre-stressed Spiroll ceiling panels and filigree panels with superconducting. The roofing of the building is solved by a combination of a flat roof with a vegetation block with extensive green and saddle roofs with a continuous concealed dormer whose supporting function is provided by a wooden purlin roof truss.

This diploma thesis describes the design of showroom and car service of Mazda brand in Trencin. It is a detached building on a flat terrain. The car showroom and car service have two above-ground floors and one underground floor. On the first underground floor there is an underground garage designed for new cars for sale. On the first floor there is a car showroom with a customer base and a car service with facilities for car service staff. On the second floor there are offices with facilities for staff. The building is designed from a reinforced concrete structure and porous concrete blocks. The ceilings are monolithic reinforced concrete and the roof is designed as flat with trusses and reinforced concrete slab. The work includes project documentation for the construction.

This master´s thesis deals with the proposal of the kindergarten in the cadastral territory Moravany u Brna, district Brno-venkov. This object is self-standing building in a newly-built area. The kindergarten is designed for two schoolrooms up to the total number of forty-eight pupils. The object is double-storeyed, the part of the object has the basement. The roof is flat with a coating insulation, loaded with a mix of gravel and rubble. The object is designed as a brick construction with a contact thermal insulation system. The object is situated in a slightly sloping terrain.

This diploma thesis presents processing of the design documentation for public service building. The scope of this work is in accordance with ordinance 499/2006 and latter amended 62/2013. There is a small brewery in the building, as well as a pub, tourist apartments and the owner's flat. Building is situated in Vranová, Blansko district. It is a three-story building without basement, roofed with flat and mono-pitched roofs. The ground floor consists of a pub, a brewery and a communication wing dividing the building in the middle. The second floor consists of hostel type tourist apartments with shared facilities. The third floor belongs exclusively to the owner of the building who has an apartment there. The building is bricked, complemented by an external thermal insulation composite system (ETICS). Floor structure consists of SPIROLL panels. Design documentation was developed in AutoCAD software.

This diploma thesis consists of a project of a sports relaxation centre in Lipno. The object is designed to be suitable for accommodation, catering and sports purposes. The building has atypical floor plan with a flat roof above the accommodation and catering sections. Above the part for sports purposes there is a sloping roof. In the basement, a corridor for running, a technical room and wellness facilities such as whirlpool, sauna and massages, could be found. On the first floor, there is catering section, in the southern part of the first floor there is accommodation section and in the northern part sports hall, gym and squash courts with appropriate facilities. The second floor copies the first floor with its similar purposes besides the fact that there is no catering section.

The aim of the Diploma thesis is the project documentation for the execution of the administrative building. This is an administrative building located on the outskirts of Letohrad. The building consists of one section that has three above-ground floors and one section that has only one above-ground floor. The building is used for administration, trade and storage. For administrative work is designed the three-storey part of the building and single-storey part of the building is designated for trade and storage. The main entrances to the building are located on its west side and the next entrances to the building is located on its southern side and northern side. The building is based on foundation strips and pads of plain concrete. The building is designed from a masonry structural system made of concrete blocks made of lightweight concrete and the third floor is partly designed as a timber structure made of wooden KVH squared timber. The ceiling structures are designed from prestressed ceiling panels. Roof structure above the main part of the building is designed two-stage pitched roof octagon shape and the roof above the single-storey part of the building is designed as warm flat extensive green roof.

The subject of the master’s thesis is the project documentation of building work for multifunctional building. The object has three floors. The structural system of the building is bricked. The roof of the building is flat and the terraces are designed as vegetation and walking. On the mainfloor there are situated commercial spaces, building technical facilities and seven residential units. On the second floor there is space for commercial use and seven residential units and on the last floor there is also space for commercial use and one residential units.