The aim of the diploma’s work is composition of project documentation for the construction building of crematorium with funeral atrium. Object is situated on the cadastral area Ráj in town Karviná, number of builing plot is 524/1. Building plot is located in close proximity of central cemetery. Building is on the area Z108 (OH). According to local plan, area Z108 (OH) is area of civil equipment – public burial ground. In the building will take place funeral ceremony, cremation of the deceased. There is designed administrative spaces and space for employees of crematorium. Object is designed with partial basement building. In underground floor there is situated only spaces for technology, technical room and store. In the first above-ground floor there is funeral atrium with facility, administrative part, cremaction part with facility. In the second underground floor there is only balcony, where is placed organ. Construction system of object is wall system. External walls in basement are composed like cast-in-place structure of reinforced concrete with thermal insulation. External walls in the first above-ground floor are composed of vertically performe clay blocks. Funeral atrium have external walls from reinforced concrete with thermal insulation. Fasade of atrium is ventilated with granit cladding. There is designed flat roof under the first underground floor. Screed to fall is from thermal insulation. Roof is weighted by aggregate. Hydro isolation is composed from asphalt belts. Under funeral atrium there is flat roof too, but sreed to fall is composed of ceiling construction. Strip foundations is projected from concrete. Floors construction are designed as floatting floor. Stairs are composed as cast-in-place structure of renforced concrete.

The diploma thesis deals with a project of a new building, Garni hotel in the municipality of Pacov. The object is made up of three ground floors. The first floor contains a restaurant with limited board possibilities, restaurant facilities, a manager’s office, staff facilities and a technical area of the building. Conference rooms with facilities and hotel rooms can be found on the second floor. There is one four-bed room, three double rooms (one of them is designed for disabled people) and two single rooms on this floor. One four-bed room, three double rooms and three single rooms are located on the third floor. The building is created with a masonry structural system and is roofed with a warm flat roof with a typical sequence of layers. A green roof is used above a part of the building.

This thesis deals with processing of a certain part of project documentation for making a new-build house of a guest house. The given object is situated in a flat field in a village Provodov-Šonov, cadastral land Šeřeč which belongs to the Královéhradecký region. The guest house meets the village’s requirements. The guest house is designed as a four-floor building with one underground and three over ground floors. The overall capacity of the guest house is 61 accommodated people. There is a wall construction system. The wall in the underground floor is made from concrete blocks and in the over ground part there are limestone-sand blocks. The object is isolated with desks from mineral fibre. The ceiling construction is designed from prestressed iron-concrete panels. The roof is laid out as flat.

The subject of this diploma thesis is the desing and development of project documentation for the construction of a new building of the multifunctional house Rozkošská. Object will be located in the city of Hlavlíčkův Brod in part Rozkoš. The new biulding will be divided in to commercial space in ground floor, office space in second floor and residental area in third floor. It is three-storey multifuncional house with a warm flat roof with a typical sequence of layers based on foundation pads. The structural system is desinged reinforced concrete frame. The diploma thesis is processed with the valid standards, laws and decreens of the Czech Republic in the current version.

This thesis addresses of construction design of new building multifunctional house. Multifunctional house is consists of subterranean garage, hairdresser, cafe and 36 residential units. The building has a cellar and 6 floors and it is covered with a flat roof.

The Thesis deals with a design and project documentation for the public library in Ivanovice na Hané. The construction was designed as the four-floor object with a partial cellar. The ground plan creates a rectangle. The object is roofed with a warm deck flat roof. In the basement, an archive area and a utility room prevail. On the first floor of above-ground, there is a space for public and employees. In the separated area, the Confectionery equipped with own sanitary facility for customers and employees is located. There is a spacious entry hall with the access to individual floors. On the second floor, the free library and the children´s department are situated including a lecture hall with own facilities above the Confectionery. On the third floor, there are the library headquarters and the reading area. You can find the sanitary facilities for public on each floor. The object structure is made of a monolithic reinforced concrete skeleton filled with the masonry from acoustic ceramic tiles on the above-grounded floors. In the basement, the structure is created by reinforced concrete walls and walls from the formwork. The ceiling is made of reinforced concrete prestressed panels. The object is based on the ground slabs. In the area of lift shafts, the structure is from the reinforced concrete slab. The walls in the basement are insulated with the XPS polystyrene; in the above-ground area by mineral wood boards and ventilated facades.

The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

The Master’s thesis is about processing design documentation for a new bulding of firehouse type P4. Location of the bulding is chosen so the firehouse is near the industrial precinct , further to be near to the planned highway connection and city bypass so they don’t have to pass in the event of an alarm through the city. The firehouse is design as partly two-storey and partly single-storey building. On the first floor is on the north storage part with technical utility rooms. In the middle is garage for fire trucks, and on the south side of the station is hygienic and wet areas, gym and meeting room for emergency staff. On the second floor are rooms for firefighters and offices for officers. Construction system of the building is precast concrete frame with longitudinal construction system. Building envelope is due to the local architecture designed as infill wall with contact thermal insulation systém ETICS. Warm flat roof are green. In the station are placed eight firetrucks (3x CAS, DA, TZA, RZA, AŽ, NA) and 17 fireman in the one shift in three teams.

This dissertation thesis concern the project of a multifunctional building in Hranice na Moravě. It is an individually standing object on a flat terrain. The building has four over-ground floors. In the first and second floor are administrative spaces. Administrative spa-ces consist of offices and meetings room. In a third and fourth floor are four flats. There is one 3+kk flat (three rooms with kitchenette) and one 2+kk flat (two rooms with kitchenette) on every floor. The double staircase is used to connect the individual floors. The building is designed from a structural system of ceramic fittings. The ceilings are assembled from ceramic fittings with reinforced concrete. This ceiling is also supporting part of single skin flat roof. The thesis contains project documentation for construction.

The subject of this diploma thesis is the design and elaboration of project documentation for the implementation of a new multifunctional building. The building will be located in the city of Brno in the district of Ko-márov. The new building will be divided into three separate functional units - underground garage, office space with hairdresser and residential part. Each apartment is equipped with a separate balcony. It is a four-storey, partly basement multifunctional house with a flat roof, based on reinfor-ced concrete slab. The construction system is designed wall. The basement part of the buil-ding is built from concrete molded blocks of permanent shuttering, the above-ground part from ceramic blocks of the Porotherm system. The ceiling structure consists of reinforced concrete monolithic slabs. The windows will be plastic. The thesis is designed in accordance with applicable laws, ordinances and standards.