61 |
Mathematical Formulation of Tools for Assessment of Fragility and Vulnerability of Damaged BuildingsLi, Quanwang 11 April 2006 (has links)
Performance-Based (PBE) and Consequence-Based (CBE) are new approaches to seismic design, evaluation and risk assessment, in which design criteria are devised to achieve stated performance objectives, and regional losses to civil infrastructure are mitigated through selective interventions for critical components of a civil infrastructure. These new approaches give engineers more flexibility in achieving performance goals but require substantial additional computational resources to fully achieve performance goals. As a step toward making such approaches feasible, this dissertation develops a number of computationally efficient methods for performing finite element-based structural system dynamic response analysis and reliability assessment. The Enhanced Uncoupled Modal Response History Analysis (EUMRHA) procedure developed herein is an efficient response analysis procedure to make the analysis of dynamic structural response to earthquakes in the nonlinear range less time-consuming. This technique is used to investigate the potential for aftershocks to cause additional damage to steel moment frame buildings, utilizing a technique designed to enhance the efficiency of Monte Carlo simulation in estimating low-probability events. Relatively simple probabilistic tools are proposed for purposes of rapid structural evaluation and condition assessment of damaged buildings. Finally, an analysis-based inspection scheme based on an associated probability model of connection damage is proposed for assessing the safety condition of existing buildings, and a procedure to assess the likely performance of an un-repaired building during a future earthquake is developed.
|
62 |
Seismic fragility estimates for corroded reinforced concrete bridge structures with two-column bentsZhong, Jinquan 15 May 2009 (has links)
To assess the losses associated with future earthquakes, seismic vulnerability
functions are commonly used to correlate the damage or loss of a structure to the level of
seismic intensity. A common procedure in seismic vulnerability assessment is to
estimate the seismic fragility, which is defined as the conditional probability that a
structure fails to meet the specific performance level for given level of seismic intensity.
This dissertation proposes a methodology to estimate the fragility of corroded
reinforced concrete (RC) bridges with two-column bents subject to seismic excitation.
Seismic fragility functions are first developed for the RC bridges with two-column bents.
All available information from science/engineering laws, numerical analysis, laboratory
experiments, and field measurements has been used to construct the proper form of the
fragility functions. The fragility functions are formulated, at the individual column,
bent, and bridge levels, in terms of the spectral acceleration and the ratio between the
peak ground velocity and the peak ground acceleration. The developed fragility
functions properly account for the prevailing uncertainties in fragility estimation. The probabilistic capacity and demand models are then combined with the probabilistic
models for chloride-induced corrosion and the time-dependent corrosion rate. The
fragility estimates for corroded RC bridges incorporates the uncertainties in the
parameters of capacity and demand models, and the inexactness (or model error) in
modeling the material deterioration, structural capacity, and seismic demands. The
proposed methodology is illustrated by developing the fragility functions for an example
RC bridge with 11 two-column bents representing current construction in California.
The developed fragility functions provide valuable information to allocate and
spend available funds for the design, maintenance, and retrofitting of structures and
networks. This study regarding the vulnerability of corroding RC bridges will be of
direct value to those making decisions about the condition assessment, residual life, and
the ability of lifeline structures to withstand future seismic demands.
|
63 |
Banking Failures In Turkey: An Econometric AnalysisEvirgen, Ozgu 01 February 2007 (has links) (PDF)
This study investigates the factors that were important in the failure of 36 banks in 1997-2006. The study uses cross-section time series data from 81 banks and employs limited dependent variable models, a duration model and a dynamic panel data model in the analysis. The major concerns are to examine the determinants of banking failures by explaining the contribution of microeconomic and macroeconomic factors in Turkish banking system, to estimate the likelihood of banking failure and timing of failure, to analyze survival time path of failed and non-failed banks separately and to construct the degree of fragility of overall banking system. Furthermore, the determinants of bank profitability and the effects of bank-specific factors and macroeconomic conditions on bank profitability are analyzed by using dynamic panel data model.
|
64 |
Fragility Based Seismic Vulnerability Assessment Of Ordinary Highway Bridges In TurkeyAvsar, Ozgur 01 July 2009 (has links) (PDF)
Recent devastating earthquakes revealed that bridges are one of the most vulnerable components of the transportation systems. These seismic events have emphasized the need to mitigate the risk resulting from the failure of the bridges. Depending on the seismicity of the bridge local site, seismic vulnerability assessment of the bridges can be done based on the fragility curves. These curves are conditional probability functions which give the probability of a bridge attaining or exceeding a particular damage level for an earthquake of a given intensity level. In this dissertation, analytical fragility curves are developed for the ordinary highway bridges in Turkey constructed after the 1990s to be used in the assessment of their seismic vulnerability. Bridges are first grouped into certain major bridge classes based on their structural attributes and sample bridges are generated to account for the structural variability. Nonlinear response history analyses are conducted for each bridge sample with their detailed 3-D analytical models under different earthquake ground motions having varying seismic intensities. Several engineering demand parameters are employed in the determination of seismic response of the bridge components as well as defining damage limit states in terms of member capacities. Fragility curves are obtained from the probability of exceeding each specified damage limit state for each major bridge class. Skew and single-column bent bridges are found to be the most vulnerable ones in comparison with the other bridge classes. Developed fragility curves can be implemented in the seismic risk assessment packages for mitigation purposes.
|
65 |
Seismic Vulnerability Of Masonry Structures In TurkeyCeran, H. Burak 01 December 2010 (has links) (PDF)
This study focuses on the evaluation of seismic safety of masonry buildings in Turkey by using fragility curves. Fragility curves for masonry buildings are generated by two behavior modes for load bearing walls: in-plane and out-of-plane. By considering the previous research and site investigations, four major parameters have been used in order to classify masonry buildings with in-plane behavior mode. These are number of stories, strength of load-bearing wall material, regularity in plan and the arrangement of walls (required length, openings in walls, etc.). In addition to these four parameters, floor type is also taken into account for the generation of fragility curves by considering out-of-plane behavior mode. During generation of fragility curves, a force-based approach has been used. In this study there exist two limit states, or in other words three damage states, in terms of base shear strength for in-plane behavior mode and flexural strength for out-of-plane behavior mode. To assess the seismic vulnerability of unreinforced masonry buildings in Turkey, generated fragility curves in terms of in-plane behavior, which is verified by damage statistics obtained during the 1995 Dinar earthquake, and out-of-plane behavior, which is verified by damage statistics obtained during the 2010 Elazig earthquake, is combined. Throughout the analysis, ground motion uncertainty, material variability and modeling uncertainty have also been considered. In the final part of the study, a single-valued parameter, called as &lsquo / vulnerability score&rdquo / , has been proposed in order to compare the seismic safety of unreinforced masonry buildings in Fatih sub province of Istanbul and to assess the influence of out-of-plane behavior together with the in-plane behavior of these existing masonry buildings.
|
66 |
Interdependent response of telecommunication and electric power systems to seismic hazardLeelardcharoen, Kanoknart 25 August 2011 (has links)
Infrastructure systems are essential to the functioning of contemporary societies and economies. A major disruption to the built environment can lead to severe public safety issues and economic losses. Within the past few decades, modern control and information technologies have been rapidly developed in an attempt to improve the reliability of individual utility systems by exchanging technologies across them. One of the major ramifications is the emergence of interdependencies among these critical infrastructure systems, especially when facing major disruptions. Failure of an individual system becomes more likely to affect the functionality of other interconnected infrastructure systems. In order to mitigate such consequences, the mechanics of interdependencies and failure propagation among the systems must be understood.
This research focuses on the development of a framework for probabilistically quantifying interdependent responses of two essential infrastructure systems - telecommunication and electric power systems - subjected to seismic hazards, which are one of the most powerful and geographically extensive threats. The study explores the effects of seismic hazards beyond the obvious seismic-induced physical damage to utility system facilities. In particular, the seismic evaluation of telecommunication systems considers the degradation of system performance due to physical damage and the abnormally high usage demands in telecommunication systems expected after catastrophic earthquakes. Specifically, a newly developed seismic-induced congestion model is proposed, and the probabilistic formulations of the critical interdependencies across telecommunication and power systems are presented in a probabilistic framework. The study illustrates the procedure for fragility analysis of interdependent systems and presents a practical application through a test bed implementation in Shelby County, TN.
From this study, telecommunication systems are found to be very vulnerable to seismic-induced congestion. The electric power interdependencies amplify the degradation in telecommunication systems up to 50% in their vulnerability while electric power operations are heavily dependent upon telecommunication infrastructures and the fragility median of electric power system observability can decrease by 30%. The study also indicates up to 100% overestimation of the independent fragility analysis and the results reveal the relationship between system topology and the sensitivity of system performance to the intensity of interdependencies. The proposed methodology is expected to be a valuable tool for decision making in evaluating seismic mitigation strategies and also to provide the foundation for future studies on interdependent responses of other critical infrastructures.
|
67 |
Vulnerability of critical infrastructure to volcanic hazardsWilson, Grant Michael January 2015 (has links)
Volcanic eruptions produce a range of concurrent, sequential and recurrent hazards which can impact society and critical infrastructure. For daily activities, modern societies are reliant on dependable functioning critical infrastructure, such as electrical supply; water supply; wastewater; transportation; communication networks; buildings; air conditioning and ventilation systems; and electronic equipment. In addition, during volcanic eruptions these sectors are vital for effective emergency response and recovery. Despite the importance of critical infrastructure, the systematic quantification of their vulnerability to volcanic hazards, a key aspect of volcanic risk management, has received little research attention. Successful volcanic risk management and disaster risk reduction are cost effective investments in preventing future losses during eruptions and increasing resilience to volcanic hazard impacts. Effective volcanic risk management requires the characterisation of both hazards and vulnerabilities to the same level of detail.
This thesis develops a methodological framework to quantitatively assess the vulnerability of critical infrastructure sectors to volcanic hazard impacts. The focus is on fragility and vulnerability functions which provide quantitative relationships between impact (damage and disruption) and volcanic hazard intensity. The framework details how post-eruption infrastructure impact data, compiled in a newly established infrastructure impacts database, can be classified by hazard and impact intensity to derive vulnerability and fragility functions. Using the vulnerability framework, fragility functions for several critical infrastructure sectors for volcanic tephra fall impacts are derived. These functions are the first attempt to quantify the vulnerability of critical infrastructure sectors using a systematic approach. Using these fragility functions, risk is estimated for the electrical transmission network in the North Island of New Zealand using a newly developed probabilistic tephra fall hazard assessment.
This thesis and framework provide a pathway forward for volcanic risk scientists to advance volcanic vulnerability assessments such that comprehensive and robust quantitative volcanic risk assessments are commonplace in infrastructure management practices. Improved volcanic vulnerability and risk assessments leads to enhanced risk-based decision making, prioritisation of risk reduction investment and overall reduction in volcanic risk.
|
68 |
Non-linear modeling parameters for reinforced concrete columns subjected to seismic loadsSivaramakrishnan, Balaji 14 February 2011 (has links)
The American Society of Civil Engineers (ASCE) Standard 41-06 Supplement No.1 (2007) assists engineers in modeling and evaluating the non-linear behavior of structures till collapse. Different levels of conservatism were used throughout the standard to produce modeling parameters for different structural elements, which leads to inconsistencies at the system level. Task to update current ASCE 41-06 provisions pertaining to RC structures is now handled by ACI (American Concrete Institute) committee 369 entitled “Seismic Repair and Rehabilitation”. This study is a part of ACI 369 committee’s effort.
Existing provisions for non-linear analysis are re-assessed in this study for both rectangular and circular reinforced concrete columns. A database of 490 column tests was compiled for this project. Median rather than conservative estimates of non-linear modeling parameters were produced to achieve “best” estimates of structural behavior. Proposed modeling parameters show improved fit with experimental data over existing parameters. Data necessary for selection of acceptance criteria are provided. / text
|
69 |
Multi-hazard Reliability Assessment of Offshore Wind TurbinesMardfekri Rastehkenari, Maryam 1981- 14 March 2013 (has links)
A probabilistic framework is developed to assess the structural reliability of offshore wind turbines. Probabilistic models are developed to predict the deformation, shear force and bending moment demands on the support structure of wind turbines. The proposed probabilistic models are developed starting from a commonly accepted deterministic model and by adding correction terms and model errors to capture respectively, the inherent bias and the uncertainty in developed models. A Bayesian approach is then used to assess the model parameters incorporating the information from virtual experiment data. The database of virtual experiments is generated using detailed three-dimensional finite element analyses of a suite of typical offshore wind turbines. The finite element analyses properly account for the nonlinear soil-structure interaction. Separate probabilistic demand models are developed for three operational/load conditions including: (1) operating under day-to-day wind and wave loading; (2) operating throughout earthquake in presence of day-to-day loads; and (3) parked under extreme wind speeds and earthquake ground motions. The proposed approach gives special attention to the treatment of both aleatory and epistemic uncertainties in predicting the demands on the support structure of wind turbines. The developed demand models are then used to assess the reliability of the support structure of wind turbines based on the proposed damage states for typical wind turbines and their corresponding performance levels. A multi-hazard fragility surface of a given wind turbine support structure as well as the seismic and wind hazards at a specific site location are incorporated into a probabilistic framework to estimate the annual probability of failure of the support structure. Finally, a framework is proposed to investigate the performance of offshore wind turbines operating under day-to-day loads based on their availability for power production. To this end, probabilistic models are proposed to predict the mean and standard deviation of drift response of the tower. The results are used in a random vibration based framework to assess the fragility as the probability of exceeding certain drift thresholds given specific levels of wind speed.
|
70 |
Bisphosphonates and Bone MicrodamageCaruthers, William A 01 January 2012 (has links)
Osteoporosis is a significant healthcare issue due to the increasing elderly population. Bisphosphonates are used to treat osteoporosis by reducing the rate of resorption, increasing bone mineral density (BMD) and thereby reducing fracture risk. Long-term bisphosphonate treatment, however, has been associated with low-energy fractures. Bone microdamage may provide a partial explanation for one of the mechanisms responsible for these fractures since it has been shown to reduce bone toughness, fracture resistance, and bone strength. The goal of this study was to quantify the changes in bone microdamage parameters with the duration of bisphosphonate treatment. This study selected, stained, and histomorphometrically analyzed 40 iliac crest bone biopsies from controls and female patients with osteoporosis treated with bisphosphonates for varying durations (up to 12 years). All subjects were matched for age and low turnover. The results showed that microcrack density and microcrack surface density were significantly greater in patients who took bisphosphonates for at least 5 years compared to those who took bisphosphonates for less than 5 years or not at all. These results reveal novel, clinically relevant information linking microdamage accumulation to long-term bisphosphonate treatment without influences from age or turnover.
|
Page generated in 0.0737 seconds