Urbanisation is characterised by mass migration of people to urban areas and conversion of land from rural to urban land uses. Changes in population dynamics have led to half the world’s population living in urban areas; in developed countries, urban dwellers account for three-quarters of the total population. Though populations have shifted from rural to urban areas, people continue to rely on their environment, and trees in particular, for tangible and intangible benefits alike. A great deal of factual and anecdotal knowledge supports the role of trees for ecological, social, and economic well-being. In spite of this, during urbanisation, previously vegetated land is converted to housing, roads, or utility corridors, all of which are necessary to support growing populations. This thesis investigates tree growth in these modified urban landscapes, in particular, the effects of pavements on urban trees. Pavements are truly pervasive, covering more than half of all land in highly developed urban areas. Their durability and strength are of great importance to transportation, but large-scale soil sealing is not without consequence. Pavements affect the hydrologic cycle, soil and air temperature, and nutrient cycling. Because of their effect on the surrounding environment, pavements inherently affect remnant or planted trees. They are believed to negatively affect tree growth and survival, thereby compromising the ecological, social, and economic benefits otherwise derived from the urban forest. In recent times, porous pavements have been increasingly installed in favour of impervious pavements. Porous pavements are perceived to be an environmentally-sound alternative to standard impervious pavements. This thesis begins by reviewing the literature concerning porous pavement’s effect on underlying soil and urban vegetation, thus illustrating the scarcity of empirical data describing the effect of porous pavement on tree growth. A greater understanding of porous pavement’s impact on the surrounding environment is needed, if its installation is to continue. With this aim in mind, this thesis describes an experiment in Christchurch, New Zealand, which monitored the impacts of porous and impervious pavement on underlying soil conditions, and subsequent tree growth. The experiment comprised 50 Platanus orientalis trees planted in an augmented factorial design, which consisted of controls and four treatments. Trees were split evenly amongst plots, such that ten replicates existed per treatment. The pavement treatments measured 2.3m by 2.3m, and were based on the combination of pavement type (2 levels: porous, impervious) and pavement profile design (2 levels: +/- subbase compaction and gravel base). The resulting four treatments were impervious concrete pavement (IP), impervious concrete pavement with compacted subbase and gravel base (IP+), porous concrete pavement (PP), and porous concrete pavement with compacted subbase and gravel base (PP+). From December 2007 to March 2009, data were collected to determine the effect of these treatments on soil moisture, aeration, pH, and nutrient concentration. Final tree height, stem diameter, shoot and root biomass, and root distribution were also measured at the conclusion of the experiment. Results of this experiment indicated that the effects of pavement porosity on soil moisture and aeration were dynamic, varying with season and soil depth. Increased soil moisture beneath porous pavements resulted from rapid infiltration following precipitation. This decreased the duration of plant stress resulting from drought. Relative to bare soil, paved plots had consistently greater soil moisture, likely because pavements reduced evaporation. The inclusion of a gravel base in the profile design limited capillary upflow, which resulted in lower soil moisture under pavements designed with a gravel base. Soil aeration was significantly lower beneath pavements relative to unpaved plots. This is likely related to greater soil moisture beneath pavements. Finally, soil pH increased beneath pavements, in particular beneath porous pavements. Though all growth parameters increased for trees surrounded by porous, rather than impervious pavement, this occurred only in the absence of a compacted subgrade and gravel base. Evidently, the impact of the compacted subgrade superseded the impact of pavement porosity. Furthermore, root growth was relatively shallow beneath pavements, likely due to favourable soil moisture directly beneath pavements. This research highlights (i) the dramatic effect of pavements on underlying soil conditions; (ii) that pavements do not inherently limit tree growth; (iii) that porous pavements can conditionally improve tree growth; and (iv) that soil compaction limits potential benefits resulting from porous pavements.

Granular materials are widely used as unbound layers within the infrastructure system playing a significant role on performance and maintenance. However, fields like pavement and railway engineering still heavily rely on empirically-based models owing to the complex behaviour of these materials, which partly stems from their discrete nature. In this sense, the discrete element method (DEM) presents a numerical alternative to study the behaviour of discrete systems with explicit consideration of the processes at particulate level governing the macroscopic response.  This thesis aims at providing micromechanical insight into the effect of different particle sizes on the load-bearing structure of granular materials and its influence on the resilient modulus and permanent deformation response, both of which are greatly influenced by the stress level. In order to accomplish this, binary mixtures of elastic spheres under axisymmetric stress are studied using DEM as the simplest expression for gap-graded materials, which in turn also can be seen as a simplification of more complex mixtures. First, the effect of the fines content on the force transmission at contact level was studied. Results were used to define a soil fabric classification system where the roles of the coarse and fine fractions were defined and quantified in terms of force transmission. A behavioural correspondence between numerical mixtures and granular materials was established, where the mixtures were able to reproduce some of the most significant features regarding the resilient modulus and permanent strain dependency on stress level for granular materials. A good correlation between soil fabric and performance was also found. Generally, higher resilient modulus and lower deformation values were observed for interactive fabrics, whereas the opposite held for instable fabrics. Mixtures of elastic spheres are far from granular materials, where numerous additional factors should be considered. Nevertheless, it is the author’s belief that this work provides insight into the soil fabric structure and its effect on the macroscopic response of granular materials. / Grus i form av krossat bergmaterial används i stor utsträckning som obundna bär- och förstärkningslager inom tranportinfrastrukturen och spelar där en viktig roll för verkningsätt, drift och underhåll. Det finns emellertid begränsad kunskap om de fundamentala mekanismerna på partikelnivå (d.v.s. enskilda gruskorn), mekanismer som styr det makromekaniska verkningssättet. Områden såsom väg- och järnvägsbyggnad bygger fortfarande väsentligen på empiriskta baserade modeller p.g.a. dessa materials komplexa uppträdande under belastning. Denna komplexitet beror delvis på den diskreta naturen hos problemet vilket innebär att traditionell matematisk modellering som vore materialen homogena och kontinuerliga, blir inadekvat. Mot denna bakgrund utgör den s.k. diskreta elementmetoden (DEM) ett numeriskt alternativ för att studera verkningssätt hos diskreta system där man explicit beaktar mekanismerna på partikelnivå. Denna avhandling, som baseras på tre vetenskapliga bidrag, syftar till att ge mikromekaniska insikter vad gäller effekten av olika partikelstorlekar på bärförmågan hos grusmateral och dess inverkan på styvhet och motstånd mot permanenta deformationer. Båda dessa parametrar påverkas kraftigt av spänningsnivån och kan studeras genom triaxialförsök. För att undersöka detta studerades med hjälp av DEM binära blandningar av elastiska kulor – den enklaste modellen av grusmaterial med språng i fördelningskurvan – som utsattes för axialsymmetrisk belastning. Denna modell kan i sin tur ses som en förenkling av mer komplexa blandningar. Inledningsvis studerades effekten av finpartikelinnehållet på partikelkontakternas kraftöverföring. Resultaten användes för att klassificera olika typer av skelettstrukturer i grusmaterialet där den finare och den grövre fraktionens roller kvantifierades med utgångspunkt från kraftöverföringen i stället för från det makromekaniska verkningssättet. Resultaten visade en korrelation vad gäller verkningssättet mellan numeriska blandningar och grusmaterial, där de numeriska blandningarna kunde reproducera några av grusmaterials viktigaste kännetecken vad gäller spänningsberoendet för styvheten vid avlastning och motståndet mot permanent deformation. Vidare visades att styvheten kunde bestämmas ur första belastningscykeln vilket underlättar att övervinna de begränsningar avseende beräkningstid som annars förknippas med DEM. God överensstämmelse mellan grusmaterialets skelettstruktur och verkningssätt kunde också observeras. Generellt observerades högre styvhet och mindre permanenta deformationer för interaktiva skelettstrukturer medan det motsatta gällde för instabila strukturer. Numeriska blandningar av elastiska kulor är långt från verkliga grusmaterial, för vilka ett stort antal ytterligare faktorer måste beaktas. Icke desto mindre är det författarens övertygelse att detta arbete ger insikter i grusmaterialets skelettstruktur och dess effekter på det makromekaniska verkningssättet hos grusmaterial. / <p>QC 20161116</p>