No description available.

The subject of this thesis is the documentation of terraced houses with inner courtyard intended for housing. The object is located on the outskirts of Veverská Bítýška in the area of detached houses and apartment block. The building will be used for 32 households with the total capacity 128 people. The part of thesis was designing underground garage with capacity of 25 cars and 42 bicycles. The area of detached house is situated on a flat terrain. Houses A have two floors without the basement with garage in front of house. Every house has individual main entrance. The building is made of brick from ceramic blocks from the Heluz system with thermal insulation of the facade. Houses have a single-layer flat roof. Part B has two floors with basement where is situated garage. Entrance to this garage is from public garage. The building is made of brick from ceramic blocks from the Heluz system with thermal insulation of the facade. Underground walls are made of cast-in-place reinforced concrete. Houses have a single-layer flat roof. Public underground garage is separated from the another buildings. Main entrance to the garage is from the ramp. The building is made of cast-in-place reinforced concrete with external wall insulation system. The building has a vegetative roof which forms part of the courtyard.

The diploma thesis deals with project design documentation of House of Furniture in Trenčín. The object is designed as a two floor buildings with basement below grand level. Object´s ground plan is rectangular shaped. First floor contains a lobby and open store space. Second floor is meant predominantly for an administrative purposes. Underground garage is designed in basement. Construction system is monolithic skeletal structure with transverse dies and stiffening core. In the middle of object is designed open atrium with vegetation surface. Atrium goes through both of above- ground floors. Object is covered by a flat roof.

The diploma thesis includes a new building of the fire department. The building is located in Valašské Klobouky, along Brumovská street. The main entrances to the buildings are oriented to the west. It is a two-storey building, in part a basement. The construction system is bricked. The object is covered with a flat and sloping roof.

The subject of this diploma thesis is the project documentation of mixed-use building construction, located on Milady Horákové street in the city of Brno, a borough of Černá Pole. Five above-ground floors and one underground floor with an adjacent parking garage are designed. On the first above-ground floor, there are a café, snack bar and main entrances to the building. On the second floor, there are office spaces. On the third to fifth floors, there will be residential units. Above the garage, there is a green roof designed for recreation. The roof above the main building is green also, but it's accessible only for maintenance workers. Entrances for both people and cars are located on the south side of the house. The whole building has a basement. where walls and foundation slab are made of water-impermeable monolithic concrete. Bearing internal masonry is made of monolithic concrete. Both bearing and non-bearing masonry of above-ground floors are made of ceramic blocks. The front and shaft walls are made of plasterboard. The southern facade is designed as ventilated, the northern facade is designed by ETICS. The ceiling structures are of reinforced concrete monolithic slabs. Roofs are green and flat.

The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

Subject of this thesis is elaboration study and project documentation of new firehouse building type P in Polná. New firehouse building is designed instead of the original firehouse, which was in poor technical condition and didn’t meet the new requirements. The firehouse is situated on the plot number 91/5 with adjacent numbers 91/11, 91/10, 91/7, 91/8, 91/9, 91/6, 2684, 2693. The land is slightly sloping. The building is detached, partially basement and with three aboveground floors. The vertical load-bearing structure in the basement consists of masonry from permanent formwork and in the aboveground floors the sand-lime masonry YTONG SILKA. Horizontal load-bearing structures are designed from prestressed panels Spiroll. The roof is designed as single-skin flat roof with a poured cementitious foam layer. Firehouse consists of two parts – administrative-operational part and garage of emergency vehicles with appropriate stores. The main entrance and exit of vehicles are situated southwest. The administrative of firehouse is on the 3rd floor. Fire brigade rooms are on the 2nd floor, locker rooms with clothing stores are on the 1st floor. The technical background is designed on the underground floor. Garage parking space is situated over two floors and is roofed by flat single-skin roof. Project documentation is designed according applicable laws, decrees, regulations and technical standards.

The area is located in the city of Brno - Tuřany. It is defined from the west Černovice river with natural monument Holásky Lake, from east by railway line from the south street U Potoka. The aim is a comprehensive urban design of the development area. The existing area is a typical structure of the former village connected to Brno. Location is convenient for the development of residential functions and optional equipment. The main objective of the solution is to design urban areas, which would carry on the original structure of the village and effective form of use of the available unused area.

A freestanding multi-functional building in Opava. Basement of the object designed for parking cars of the residents. First and second floor designed as a bike shop. Third, fourth and fifth floor designed as flats of different types and sizes, determined for permanent housing. The object is covered by single-layer roof.

Master's thesis - Apartment house - is drafted as building documentation under relevant laws and standarts. The project processes documentation of a new Apartment building. It is designed as a brick building with basement and three aerial floors. The roof is designed as a flat and walkable roof.