The subject of the diploma theses is architectonical's study of the culture and public center. It's consisted of three buildings, located in the southwestern part of the Brno dam. The objects are functionally divided into yachtclub, café with a terrace and hotel. The buildings are designed as a wave shape that are visually lined. The design consists of a steel arch truss supported by steel columns. The cladding is made of masonry Porotherm 30 P + D fixed between the steel columbs. Glassed part of the building is designed by using structural glazing which is an aluminum facade system REYNAERS CW 86/SG. The top layer of a roof is made by white Siakaplan membrane foil. The color tones are white (Sikaplan, membrane roofing terraces), brown (wood paneling) and metal (metal veneer, exterior steel staircase).

Master's thesis includes designing of exhibition pavilon on a circular platform with a diameter of 35m. The pavilon is designed as a schwedler circular dome. The construction is designed as a ball and is made of tubes. Pavilon includes designing of floors and stairs bearing system that is also made of steel.

Project documentation in stage construction of the new building a four-storey residential building in,, Bystřice nad Pernštejnem " with establishment of the veterinary ambulance, and 7 bulit garages located in Bystřice Pernštejnem. Block of flats has 8 units. The building is designed as a regular block with projecting first Above ground floor south, north and east. The cladding is made from blocks SENDWIX system with external plastic contact insulation and window construction with triple glazing. The building has a flat roof. Conceptually, the building was designed as a passive house with the class of heat transmission through the building envelope A-very economical.

Im Rahmen der vorliegenden Arbeit wurden neuartige keramik- und stahlreiche Verbundwerkstoffe, auf Basis von MgO-teilstabilisiertem Zirkoniumdioxid und hochlegiertem austenitischem TRIP Stahl entwickelt. Die keramikreiche Verbundwerkstoffe mit bis zu 30 Vol.% metallischer Partikelverstärkung wurden über die Schlickergusstechnologie bzw. die Druckschlickergusstechnologie hergestellt und können als thermo-mechanisch beanspruchte Bauteile zum Einsatz kommen. Es wurden weiterhin metallreiche Verbundwerkstoffe mit bis zu 10 Vol.% keramischer Partikelverstärkung erstmalig über die Papiertechnologie hergestellt. Dadurch ergeben sich vielfältige Möglichkeiten metallreiche Leichtbaustrukturen mit verbesserten Energieabsorptionsvermögen zu erzeugen. Im Mittelpunkt der vorliegenden Arbeit stand die Entwicklung der keramikreichen Schlicker, die Formgebungstechnologien, die Entwicklung geeigneter Entbinderungs- und Sinterregime sowie die Charakterisierung der Verbundwerkstoffe hinsichtlich ihrer Mikrostruktur sowie der mechanischen bzw. der thermo-mechanischen Eigenschaften.

This master’s thesis focuses on effect of outer building construction on thermal load of space. The effect of translucent and non-translucent construction is discussed. The project of air-conditioning system is prepared for the two alternatives of the translucent construction, including the purchase price of the airconditioning system and glazing and the savings on summer cooling. Afterwards the period of the recovery of investment is calculated. The plan of the airconditioning system is connected to my bachelor’s thesis “Airconditioning in the car showroom”, the subject of which was the plan of the airconditioning system of the car showroom.

This diploma thesis focuses on a project of new building of Planetarium in Prostějov in Olomouc district. The project is in accordance eith official assignment and with contemporary Czech standards and legislation. Building is placed to biggest park of Prostějov, next to the centre of city on an empty plot owned by city. Object should serve to the people as a cultural centre. The building plan is irregullarly-sharped with maximum dimensions 47,6 x 26,6 m and has three floors. On the first floor is galery, literature store and cafe and on the second floor is projection room and observatory. Structural systém is skelet and walls from reiforced concrete. Foundations of the building are made of concrete strip foundation and reiforced concrete square footings and strip foundations. Ceilings are made of reiforced concrete panels. There are roofs made by steel cupolas. Unsound walls are made of porous fittings. All external walls and cupolas are insulated with mineral wool. Doors and windows have aluminium frame and triple glazing, inner doors are wooden. As result there’s structurally, operationally and aesthetically functional complex, that will be benefit for the city and its citizens, especially for their cultural life.

Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.

The aim of this diploma thesis is trying to solve difficulties connected with administrative buildings. In this thesis we are talking about possibility that administrative building can have low energy footprint. Most of energy consumption of administrative building is not created by heating but mostly by cooling and by consumption of office equipment. That is why there have been used modern equipment of the building as well as automatic control of building equipment.

The subject of my diploma thesis is a new-building of a municipal authority with a nursery school in Obora near Boskovice. The objects are statically and operationally separated from each other, but they formo ne unit. The building is located on the corner of the village in a flat terrain and thus forms the dominant feature of the village and a landmark. The target of the design was to create a building that will harmoniously connect to the surrounding buildings, public spaces and the school garden. The municipal authority has a rectangular floor plan, two-storey, basement, covered with a sloping roof, the building has a designed elevator. In the basement there are cellars of local associations, on the ground floor there is information center, a municipal library and on the first floor there is a municipal office with a registry office and a ceremonial hall. The attic can be used in the future for municipal apartments for rent. An official board with a public space is designed ahead of the municipal office. A photovoltaic power plant will be located on the roof of the municipal office. The nursery school has a trapezoidal floor plan, ground floor, no basement, covered with a vegetated flat roof. In the nursery school there is a children's day room with a storage room, storage of mattresses, teaching aids, food preparation, technical and hygienic facilities. The structural systém of both objects is longitudinal, wall. The underground part of the municipal office is designed in a white concrete tub system. The vertical load-bearing constructions are made from cut ceramic blocks. The horizontal constructions in the municipal office are monolithic, ferroconcrete, and in the nursery school they are prefabricated, ferroconcrete. The project was made in AutoCad software application, 3D model in 3D modelling computer program SketchUp.

The subject of my diploma thesis is the solution of the construction of the Hotel Karpaty located near the town of Valašské Klobouky. The thesis contains an accompanying technical report, solution of transport routes, including traffic situation, time and financial plan of construction, study of implementation of main technological stages, construction site project with division into individual stages, drawing part and construction site report, design of main working machines and mechanisms, time hotel construction plan, plan for securing material resources, including budget and staff needs chart, technological regulation of monolithic ceiling structures, control and test plan for monolithic ceiling structures, design and installation of Schüco aluminum windows, design of construction measures Hotel Karpaty according to LEED standard.