No description available.

京都大学 / 新制・課程博士 / 博士(理学) / 甲第23723号 / 理博第4813号 / 新制||理||1689(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 寺嶋 正秀, 教授 林 重彦, 教授 渡邊 一也 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

This thesis aims at investigating the feasibility of realizing antireflection (AR) and high-reflection (HR) to the semiconductor waveguide end facet using monolithically integratable deep-etching technology to replace the conventional thin film dielectric coating counterpart. Conventional AR coating and HR coatings are the building blocks of semiconductor optical amplifier and semiconductor lasers. In this thesis, the AR coating and HR coating are first studied systematically and comprehensively using two computational electromagnetics approaches: plane wave transmission matrix method (TMM) and finite difference time domain (FDTD) method. The comparison of the results from the two approaches are made and discussed. A few concepts are clarified based on the different treatment between the AR coatings for bulk optics and those for semiconductor waveguide laser structure. The second part uses the same two numerical tools and more importantly, the knowledge gained from the first part to analyze and design deep-etched waveguide gratings for the advantage of ease of monolithic integration. A variational correction to the TMM is provided in order to consider effect of the finite etching depth also in the plane wave model. Specially, a new idea of achieving AR using deep-etched waveguide gratings is proposed and analyzed comprehensively. A preliminary design is obtained by TMM optimization and FDTD verifications, which provides a minimum power reflectivity in the order of 10-5 and a bandwidth of 45nm for the power reflectivity less than 10-3. In order to eliminate the nonphysical reflections from the boundary, the perfectly matched layer (PML) absorbing condition is employed and pre-tested for antireflection analysis. The effects of etching depth and number of etching grooves are specifically analyzed for the performance of proposed structures. Numerical results obtained by FDTD method indicate a promising potential for this alternative technologies. / Thesis / Master of Engineering (ME)

Partially coherent interaction of the feedback light with the field in the laser cavity is affirmed with the fiber Bragg grating (FBG) stabilized 980-nm pump lasers, on the contrast of normally accepted totally incoherent state of operation in the “coherence collapse” regime. Coherence parameter y was defined in this paper to identify the fraction of feedback light working coherently. It is shown that y can be determined by fitting the measured power-difference versus pumping-rate curve to the simulation results. Experiments confirm that coherence parameter y decreases while the distance between the FBG and the laser facet increases, and vice versa. While, if the device is kept operating in the “coherence-collapse” regime, y would not change with the amount of feedback. This work will be help to improve the performance of the high power FBG stabilized 980-nm pump laser. / Thesis / Master of Applied Science (MASc)

Telecommunication networks based on optical fiber technology have become a major information-transmission system, satisfying the growing demand for bandwidth due to increased internet traffic and other applications such as video on demand, etc. Fiber Bragg gratings (FBGs), in recent years, have emerged as critical components for enabling high-capacity transmission since their response can be tailored to meet the needs of specific applications. FBGs are currently the focus of intense research interest in both the fiber communications and sensing fields. Optical fiber Bragg grating structures in single-mode fiber (SMFBGs) have been studied extensively since the discovery of photosensitivity in germanium-doped silica fiber. They have been used in numerous applications ranging from wavelength-selective filtering in wavelength-division-multiple-access (WDMA) systems to temperature and strain sensing. To a lesser extent, Bragg gratings in multimode fibers have also received attention because of easy coupling with light sources. Most of the MMFBGs related research work has demonstrated the formation of a Bragg grating in a graded-index MMF and briefly reported the measured transmission spectrum. So far, there are few theoretical studies on Bragg gratings in multimode fibers. In this thesis, we investigate Bragg gratings in multimode optical fibers both theoretically and experimentally. A comprehensive numerical model for MMFBGs has been established and the corresponding computer simulation software (MMFBG simulator combined with mode solver) developed. The optical properties of MMFBGs were systematically studied for the first time using our own MMFBG numerical software package. It effectively assists the design modeling for MMFBG-based optical devices. Bragg gratings in multimode fiber were also investigated experimentally. Our theoretical simulation results show good agreement with experiments and offer the insightful explanations for the underlying physics of the device. First, the guided modes were modeled and simulated for step index multimode fibers and graded index multimode fibers with emphasis on parabolic fiber structure. These are popular, standard and commercially available MM fibers, and employed throughout our experiments. This allows us for the simulation of fiber characteristics such as cut-off wavelength, mode effective index, propagation constants and optical field distribution. It also allows for calculation of mode coupling coefficients by overlap integral between any chosen guided modes. Therefore, it serves as a powerful model for the design and analysis of optical fibers. Second, the generalized MMFBG coupled mode theory formalism is derived. The physical mechanism of the behavior of MMFBGs is studied and discussed. The general solution to the MMF Bragg grating problem is achieved by Runge-Kutta, Newton-Raphson and shooting numerical methods. Our theoretical treatment, in particular, offers the advantages which can deal with not only self-coupling but also more complicated cross-coupling interactions and can solve arbitrary large number of mode coupling problems throughout the entire spectra simultaneously for multimode FBGs, thus allowing for a precise and quantitative study of MMFBGs. Such an intensive multimode fiber Bragg grating physical modeling and simulations have not been reported previously. It provides an effective means for the design and analysis of optical fiber devices based on Bragg gratings. Third, the optical properties of multimode FBGs were studies experimentally. Numerical predications of the grating spectral characteristics under fabrication and experimental condition are calculated. The results of the numerical calculations are compared with experimentally measured spectra of multimode gratings written by ultraviolet irradiation of deuterium-sensitized fiber with grating reflectivities ranging from 78% to 99.39%. Good agreement is obtained between the theoretical simulations and the experimental results. Thus, we provide quantitative explanations for the observed experimental phenomena. These explanations give both physical insight and a more complete understanding of the nature of the interaction between the wave propagation and multimode fiber gratings. Furthermore, the spectral simulation of the actual experiments prepares a theoretical guidance for the advanced experimental investigation and also presents a step toward MMFBG device design. Finally, the optical properties of MMFBGs were also studied theoretically. To our knowledge, this is the first detailed analysis and thorough investigation on grating characteristics in MMF. It is demonstrated that the transmission and reflection spectra of fiber Bragg gratings in multimode optical fibers strongly depend on the length of grating, index modulation, period of grating, mode excitation condition and physical structure of MMF. The simulation results allow us to deeply comprehend and visualize the more sophisticated behavior within a multimode fiber grating, and will also allow us to confidently predict and evaluate the performance of more complex structure MMFBGs. It provides the fundamental principles for designing the targeted spectrum performance and settles the theoretical rationale for realizing the practical applications. Overall, the comprehensive numerical model and MMFBG solver package developed in this thesis opens a clear and broad window for understanding MMFBG mechanisms from the physical point of view. Various simulation results and spectral characteristics have been researched and discussed under both ideal and experimental conditions for the purpose of experimental analysis and device design. The results of our study indicate that a new class of potential applications based on MMFBGs can be expected in optical fiber sensors and advanced communication systems. / Thesis / Master of Applied Science (MASc)

No / This work presents a novel broadband monopole antenna for digital video broadcastingterrestrial (DVB-T) application. The proposed antenna consists of a grating patch and a concave rectangular ground plane with defected ground plane, and the Multiple Split-Ring Resonator (MSRR). The added part in the ground plane and the meta-material are used to enable the antenna height reduction for fixed ranges of operating frequency. The antenna can operate from 468 MHz to 894 MHz frequency range corresponding to 62.5% of impedance bandwidth for |S11|<-7.5 dB. Details of the proposed antenna designs and experimental results of the constructed prototypes are presented and discussed.

Invention of silica based optical fiber not only led to revolution in communication but also provided fundamental basis for many research areas. One example area is distributed optical fiber sensing, which has been attracting research interests for decades. Optical fiber sensors are immune to electromagnetic interference, and resistant to corrosion and can endure harsh environment so they have found applications such as structural health monitoring, intrusion detection and oil downhole measurement. Significant research efforts have been paid to fiber sensing area, many techniques have been developed and some of them have been successfully demonstrated, however achieving both high-speed and long-range is still under intensive research. This dissertation proposes and demonstrates a technique with the capability of simultaneous long-range and high-speed sensing by employing serial ultra-weak fiber Bragg gratings (UW-FBGs) and dispersive components. Various factors which have influence on the system performance, including wavelength resolution, spatial resolution and sensing rate, are analyzed. Different types of light sources and dispersive units were designed and a sensing system was built. With this system, both static and dynamic response were measured, and a sensing link consisting of more than 2000 UW-FBGs was successfully measured at the speed of 20kHz. The noise sources of the system were also theoretically analyzed and experimentally measured. This demonstrated sensing technique can be applied to long range temperature and strain sensing. / Ph. D.

The continued growth of the communications industry has caused interest in mode-division multiplexing (MDM) techniques to flourish in recent years. These techniques allow individual waveguide modes to be used as distinct channels. However, as with any versatile technique, it should be also useful and beneficial to extend its application to other areas. This work concerns itself with an initial conceptual design of a mode-division multiplexing (MDM) enabled optical sensor network that can use modes to interrogate either specific sensors or sensor subsystems, and specifically with quanitizing and optimizing the injection and detection of the signal of interest. A hypothetical test setup is demonstrated, and the major issue of back reflection burying the intended signal is addressed, analyzed, and improved. Improvements in the signal-to-background contrast ratio (SBCR) of approximately 10dB were achieved depending on fibre type and proximal face. Suggestions for extensions to further improve the SBCR as well as for applications of this system are discussed. / Master of Science

Among various planar lightwave circuits for multiplexing/demultiplexing in an optical communication system, etched diffraction gratings (EDGs) have shown great potential due to their compactness and high spectral finesse. Conventional numerical methods for grating simulation cannot be used to simulate an EDG demultiplexer of large size (in terms of the wavelength). In the present thesis, the polarization-dependent characteristics of an EDG demultiplexer are analyzed with a boundary element method (BEM) for both an echelle grating coated with a metal and a dielectric grating with total internal reflection (TIR) facets. For EDGs with metal-coated facets, we use a more effective method, namely, method of moments (MoM). Futhermore, a fast simulation method for EDGs with TIR facets is presented based on the Kirchhoff–Huygens principle and the Goos-Hänchen shift. This simple method has a good agreement with a BEM over a wide range of practical parameters of the device. Several novel designs are presented in order to improve the performances of EDGs. (1) By making some appropriate roughness on the surface of the shaded facets, the PDL of the demultiplexer can be effectively reduced over a large bandwith. (2) For EDGs based on Si nanowire structures, we compensate the polarization-dependent wavelength dispersion (PDλ) in the whole operational spectrum by introducing a polarization compensation area in its free propagation region. (3) An EDG demultiplexer with suppressed sidelobe is designed. The designed EDG demultiplexer can give a crosstalk as small as 50 dB in theory. (4) By chirping the diffraction order for each facet, we minimize the envelope intensity for the other adjacent diffraction orders to achieve a negligible return loss in a large spectral width. (5) A design for EDG demultiplexers is presented to obtain both large grating facets and a larger free spectral range (FSR) using the optimal chirped diffraction orders for different facets. The influences of the fabrication errors (e.g., rounded effect, surface roughness and point defect in the waveguide) on the performance (such as the insertion loss, the polarization dependent loss and the chromatic dispersion) of an EDG demultiplexer are also analyzed in detail. Silicon nanowire waveguides and related EDGs are studied. An EDG demultiplexer with 10 nm spacing is finally fabricated and characterized. / QC 20100910

No description available.