As part of an ongoing project at the department of electrical engineering, ISY, at Linköping University, a voice decoder using floating point formats has been the focus of this master thesis. Previous work has been done developing an mp3-decoder using the floating point formats. All is expected to be implemented on a single DSP.The ever present desire to make things smaller, more efficient and less power consuming are the main reasons for this master thesis regarding the use of a floating point format instead of the traditional integer format in a GSM codec. The idea with the low precision floating point format is to be able to reduce the size of the memory. This in turn reduces the size of the total chip area needed and also decreases the power consumption.One main question is if this can be done with the floating point format without losing too much sound quality of the speech. When using the integer format, one can represent every value in the range depending on how many bits are being used. When using a floating point format you can represent larger values using fewer bits compared to the integer format but you lose representation of some values and have to round the values off.From the tests that have been made with the decoder during this thesis, it has been found that the audible difference between the two formats is very small and can hardly be heard, if at all. The rounding seems to have very little effect on the quality of the sound and the implementation of the codec has succeeded in reproducing similar sound quality to the GSM standard decoder.

Utveckling av en transponder som med befintliga tekniker erbjuder möjlighet att, över stora avstånd, lokalisera gods utom- såväl som inomhus.

The GSM network technology has been developed and improved during several years which have led to an increased complexity. The complexity results in more network parameters and together with different scenarios and situations they form a complex set of configurations. The definition of the network parameters is generally a manual process using static values during test execution. This practice can be costly, difficult and laborious and as the network complexity continues to increase, this problem will continue to grow.This thesis presents an implementation of an automated performance optimization algorithm that utilizes genetic algorithms for optimizing the network parameters. The implementation has been used for proving that the concept of automated optimization is working and most of the work has been carried out in order to use it in practice. The implementation has been applied to the Link Quality Control algorithm and the Improved ACK/NACK feature, which is an apart of GSM EDGE Evolution. / GSM-nätsteknologin har utvecklats och förbättrats under lång tid, vilket har lett till en ökad komplexitet. Denna ökade komplexitet har resulterat i fler nätverksparameterar, tillstånd och standarder. Tillsammans utgör de en komplex uppsättning av olika konfigurationer. Dessa nätverksparameterar har hittills huvudsakligen bestämts med hjälp av en manuell optimeringsprocess. Detta tillvägagångssätt är både dyrt, svårt och tidskrävande och allt eftersom komplexiteten av GSM-näten ökar kommer problemet att bli större.Detta examensarbete presenterar en implementering av en algoritm för automatiserad optimering av prestanda som huvudsakligen använder sig av genetiska algoritmer för att optimera värdet av nätverksparametrarna. Implementeringen har använts för att påvisa att konceptet med en automatiserad optimering fungerar och det mesta av arbetet har utförts för att kunna använda detta i praktiken. Implementeringen har tillämpats på Link Quality Control-algoritmen och Improved ACK/NACK-funktionaliteten, vilket är en del av GSM EDGE Evolution.

Unlicensed Mobile Access (UMA) provides transparent access to 2G and 3G networks for Mobile Stations over the unlicensed radio interface. Unlicensed radio tehnologies such as Bluetooth or WLAN technology connects the Mobile Station to the fixed IP network of the home or office and delivers high bandwith to the Mobile Station. The purpose of this report is to examine if subscribers can feel as secure using UMA as they do when using any of the alternetive mobile technologies that UMA supports. The security evaluation is performed by first investigating the current security level of GSM, GPRS and UMTS and then compares them to the security mechanisms of UMA. This evaluation noticed two distinct flaws in UMA that could compromise security. The conclusion is that these flaws do not have a major inpact and UMA does provide a general higher level of security than the 2G and 3G counterparts.

The voice channel in mobile communication systems have high priority and are almost always available. By using the voice channel also for data transmissions it is possible to get the same availability as for voice calls. But due to speech codecs in the voice channel, regular modems can not be used and special techniques are needed to transmit data. This thesis presents methods to transmit data over the voice channel in a GSM, UMTS or TETRA network. The focus has been on robust data transmission rather than high data bit rates. Approaches are introduced which improve the reliability for transmissions even for systems with low rate speech codecs and channels with some distortion. The results of the thesis are suggestions of symbol patterns and ways to create and adapt symbols for specific application and channel conditions to achieve the desired goal for the application.

As global location systems offer only restricted availability, they are not suitable for a world- wide tracking application without extensions. This thesis contains a goods-tracking solution, which can be considered globally working in contrast to formerly developed technologies. For the creation of an innovative approach, an evaluation of the previous efforts has to be made. As a result of this assessment, a newly developed solution is presented in this thesis that uses the Global Positioning System (GPS) in connection with the database correlation method involving Global System for Mobile Communications (GSM) fingerprints. The database entries are generated automatically by measuring numerous GSM parameters such as Cell Identity and signal strength involving handsets of several different providers and the real reference position obtained via a high sensitivity GPS receiver.

Att konstruera ett tidtagningssystem för enduro i skogen leder till flera frågor som måste undersökas och besvaras. Vilken kommunikationsteknik ska användas och vilken systemarkitekturisk lösning passar bäst? Att dra kabel ute i skogen är ett bra sätt att lösa det kommunikationstekniska problemet, lösningen är säker och relativt billig. Visst påverkas priset av distansen mellan olika klienter ute i skogen, men alla positiva egenskaper hos tekniken gör denna kostnad värd sitt pris. De geografiska variationer som kan finnas är de som kan spela ut de övriga teknikerna i form av stabilitet. En snabb resultatförmedling kräver ett system som har en väl uppbyggd systemarkitektur. Vid tidtagning kommer data i form av tider skickas från klienterna direkt till huvudservern, ingen mellanlagring sker utan data lagras centralt vilket förespråkas i IRM. Dessutom kommer ingen redundans att accepteras, vilket även det förespråkas av IRM. Det finns även flera andra parametrar som väger för att välja IRM, vilket är det som rekommenderas utifrån den analys som gjorts i denna uppsats.

Continuous-time sigma-delta modulator can be applied to wireless communications, photography and MP3 player. Portable electronics products became mainstream the design of a low power consumption analog circuit become important. Therefore, this paper presents a low power consumption continuous-time sigma-delta modulator. The low-power continuous-time sigma-delta modulator includes one-bit quantizer and a third-order loop filter consisting of resistor-capacitor integrators. Through the modified Z-transform, the discrete time loop filter design is transformed to the continuous time loop filter design. The proposed sigma-delta modulator used TSMC 0.18£gm CMOS 1P6M standard process, and its supply voltage is 1V, oversampling ratio is 32, bandwidth is 200 KHz, effective number is 13bit, power consumption is 1.5mW. Keywords: GSM, low power consumption, low power supply, continuous-time, sigma-delta modulator.

In this paper, at the beginning, we focused our studies on the practical planar antenna designs for wireless communication. We also proposed several antenna designs operating at the widely used bands, such as the ISM, GSM, GPS, 3G bands and their combinations. For the antenna designs at these bands, the circularly polarized wide slot antenna and planar monopole antenna with the conducting plate loading for ISM band application, shorted stacked mircostrip antenna for 3G band application, and the low cost high gain 8Í8 stacked patch array for dual ISM band application have been presented. To provide mobile communication and the accurate position of the user as well, the GSM/GPS dual-band antenna suitable for vehicle application is presented. Finally, the GSM/ISM dual-band antenna designed for the personal communication and wireless local area network is also shown. The performance we have achieved in these antenna designs not only satisfy the specific requirements of the system, but also show good antenna pattern, and gain.

In the near future, the integration of GSM and GPRS services will bring the wireless personal communication networks into a new era. With the extreme growth in the number of users for contending limited resources, an efficient channel allocation scheme for GSM/GPRS users become very important. Currently, existing channel allocation schemes do not consider the various characteristics of traffic classes. Consequently, users can not obtain their optimal channel resources in delivering different types of traffic. In this thesis, a preemptive channel allocation mechanism is introduced for GSM/GPRS cellular networks. Based on the call requests, for different types of services, we classify the traffic into GSM, real-time GPRS and non-real-time GPRS. Two channel thresholds are defined. TGSM/GPRS is used to separate the channels between GSM and GPRS users, while TGPRS_rt is used to separate the channels between real-time and non-real-time GPRS users. Since the two thresholds can be dynamically adjusted based on the number of call requests, the channel utilization is increased and less resources are wasted. Note that in our proposed scheme, high-priority users¡]i.e., GSM handoff calls¡^can preempt the channels being used by low-priority users¡]i.e., non-real-time GPRS calls¡^. Hence, the call blocking probability of high-priority calls can be significantly reduced and their quality of services can be guaranteed as well. We build a 3-D Markov Chain mathematical model to analyze our proposed channel allocation schemes. The parameters of our interests include the call blocking probability, the average number of active calls, the average call completion rate and the overall channel utilization. To verify our mathematical results, we employ OPNET simulator to simulate the proposed schemes. Through the mathematical and simulation results, we have observed that with the preemptive channel allocation, the high-priority calls¡]i.e., GSM and real-time GPRS¡^can achieve relatively low blocking probability while slightly increasing the blocking probability of non-real-time GPRS calls. Besides, the overall channel utilization is greatly improved due to the appropriate channel allocation.