The use of backfill in underground mining is increasing due to need for systematic backfilling of mine openings and workings to avoid surface damage, increase safety and contribution to sustainable mining. This study is to investigate backfill materials and new methods suited for systematic selection and application of backfill in underground mines. Laboratory tests were carried out on physical, chemical and mechanical properties of different backfill materials and mixtures thereof. Special attention was paid to materials generated as by-products and other cheaply available materials e.g. fly ash and FGD-gypsum from power plants, natural and synthetic anhydrite. The different material mixtures investigated can be used as a technically and economically viable backfill for underground mines. In summary, the systematic selection of backfill materials from by-products, mine waste and tailings from the mineral processing of mining industry and other industries were suited as a backfill material for test field in China coal fires and recommended for underground potash mines in Thailand.

In dieser Arbeit wurde der Einfluss verschiedener Additive (Carbonsäuren, Phosphonsäuren und Retardan P) auf die einzelnen Teilprozesse des Abbindens von Gips an technischen und synthetischen Halbhydraten unter vergleichbaren Bedingungen untersucht. Vorrangig bei der Keimbildung und beim Kristallwachstum wurde ein Einfluss der Additive beobachtet. Das pH-abhängige Wirkungsoptimum kann mit der Speziation der Additive erklärt werden. Ihre Wirkung wird durch Adsorption auf CaSO4-Oberflächen verursacht. Die Untersuchungen ergaben eine bevorzugte Ca-Affinität mit den Flächen (120) und (001) zunehmend von Citronensäure über Weinsäure, HEDP zu HDTMP. Die in verdünnten homogenen Lösungen erhaltenen Ergebnisse sind nicht direkt auf den Abbindeprozess in Pasten übertragbar. In-situ Ramanspektroskopie und Auswaschexperimente weisen in Pasten auf irreversible Adsorption und ein Überwachsen der Additive hin, was zur Abnahme ihrer Wirkung führt. Auf die Festigkeit der abgebundenen Gipskörper zeigen die Additive kaum Einfluss.

A fundamental theoretical and experimental study on calcium sulphate scale formation in hydrometallurgical solutions containing various minerals was conducted. A new database for the Mixed Solvent Electrolyte (MSE) model of the OLI Systems® software was developed through fitting of existing literature data such as mean activity, heat capacity and solubility data in simple binary and ternary systems. Moreover, a number of experiments were conducted to investigate the chemistry of calcium sulphate hydrates in laterite pressure acid leach (PAL) solutions, containing Al2(SO4)3, MgSO4, NiSO4, H2SO4, and NaCl at 25–250ºC. The database developed, utilized by the MSE model, was shown to accurately predict the solubilities of all calcium sulphate hydrates (and hence, predict scaling potential) in various multicomponent hydrometallurgical solutions including neutralized zinc sulphate leach solutions, nickel sulphate–chloride solutions of the Voisey’s Bay plant, and laterite PAL solutions over a wide temperature range (25–250°C). The stability regions of CaSO4 hydrates (gypsum, hemihydrate and anhydrite) depend on solution conditions, i.e., temperature, pH and concentration of ions present. The transformation between CaSO4 hydrates is one of the common causes of scale formation. A systematic study was carried out to investigate the effect of various parameters including temperature, acidity, seeding, and presence of sulphate/chloride salts on the transformation kinetics. Based on the results obtained, a mechanism for the gypsum–anhydrite transformation below 100°C was proposed. A number of solutions for mitigating calcium sulphate scaling problems throughout the processing circuits were recommended: (1) operating autoclaves under slightly more acidic conditions (~0.3–0.5 M acid); (2) mixing recycled process solutions with seawater; and (3) mixing the recycling stream with carbonate compounds to reject calcium as calcium carbonate. Furthermore, aging process solutions, saturated with gypsum, with anhydrite seeds at moderate temperatures (~80°C) would decrease the calcium content, provided that the solution is slightly acidic.

Made available in DSpace on 2014-12-17T14:07:19Z (GMT). No. of bitstreams: 1 PauloWSC_TESE.pdf: 3368472 bytes, checksum: 6f9f6907ea0f81a6a00e41d776e566c5 (MD5) Previous issue date: 2012-12-28 / The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load / A utiliza??o do gesso, um dos mais antigos materiais de constru??o, pela ind?stria da constru??o civil no Pa?s, vem experimentando um sens?vel e constante crescimento, em fun??o do seu baixo custo e de algumas de suas propriedades que lhe conferem vantagem comparativa em rela??o a outros materiais ligantes. Sua utiliza??o compreende diversas aplica??es entre as quais o revestimento de paredes e a confec??o de veda??es internas e de forros. Por outro lado, as fibras v?m sendo, cada vez mais, incorporadas em matrizes fr?geis, na tentativa de melhorar as propriedades do comp?sito, atrav?s da redu??o do n?mero de fissuras, da abertura das mesmas e da sua velocidade de propaga??o. Dependendo da fun??o do material ou do componente da constru??o, os desempenhos t?rmico e ac?stico, assumem grande import?ncia no contexto das edifica??es e tamb?m poderiam ser melhoradoscom a incorpora??o de fibras. Dentre as fibras vegetais, a fibra de coco seco apresenta um grande potencial, superior ?s vantagens comparativas das demais fibras, tal como uma maior resist?nciafrente ? alcalinidade caracter?stica das matrizes ciment?cias. Realizar um estudo comparativo das propriedades f?sico-mec?nicas, t?rmicas e ac?sticas de comp?sitos ? base de gesso com incorpora??o de fibra de coco seco, sob a forma de manta, constituiu-se no objetivo geral deste trabalho. Para tanto os materiais comp?sitos foram confeccionados em forma de placas, pain?is sandu?ches, com dimens?es de 500x500x24mm, sendo as camadas externas constitu?das pelogesso e a central (recheio) pela manta de fibra de coco seco. Para avaliar a influ?ncia do teor de fibras nas propriedades dos comp?sitos foram utilizadas na confec??o dos mesmos mantas com espessuras de 8 e 10 mm. Para possibilitar o estudo comparativo das propriedades foram tamb?m confeccionadas placas apenas com gesso. Foram ent?o determinadas as propriedades f?sico-mec?nicas, t?rmicas e ac?sticas do gesso e dos comp?sitos. Os resultados indicaram que para os comp?sitos ocorreram ganhos significativos em rela??o aos desempenhos t?rmico e tamb?m ac?stico, na faixa de frequ?ncia de 102,28 Hz a 1.150,00 Hz, ganhos esses crescentes com a espessura da manta. Em rela??o ?s demais propriedades f?sico-mec?nicas, os resultados mostraram que embora a resist?ncia ? compress?o tenha sido inferior para os comp?sitos, as fibras apenas evitaram um rompimento brusco, uma vez que as mesmas n?o atuam como refor?o para esse tipo de solicita??o. O mesmo comportamento ocorreu em rela??o ? resist?ncia ? flex?o, uma vez que os comp?sitos n?o sofreram ruptura brusca e ainda continuaram suportando carga depois do ponto de carga m?xima

Orientador: Jorge Luís Akasaki / Resumo: O gesso é o material sintético construtivo mais antigo que se tem notícia, e sua ampla utilização é devido as suas boas propriedades termoacústicas e de resistência ao fogo. No Brasil, seu emprego concentra-se em forros, revestimentos e paredes divisórias, conhecidas como gesso acartonado. Todavia, o gesso é um material sobre o qual existe pouco conhecimento ao nível da investigação. E este projeto se propõe a estudar mais esse material, através da confecção de compósitos a base de gesso com a incorporação de borracha de pneus, tornando-o assim um material sustentável. A borracha proveniente do processo de recauchutagem de pneus inservíveis tem ampla aplicação em pesquisas com concretos e argamassas; porém pouco se sabe sobre sua aplicação no gesso. Para atingir o objetivo proposto nesse trabalho serão feitos ensaios de microscopia eletrônica de varredura, resistência à ruptura na flexão, resistência à compressão, dureza superficial, absorção de água, densidade superficial de massa, consistência (mini-slump) e comportamento térmico. Dessa maneira, é possível afirmar que a incorporação de borracha pode ser interessante para a produção de placas de gesso, uma vez que pode incorporar um resíduo sem destino totalmente adequado, produzindo placas com características semelhantes das já utilizadas e ainda contribuindo em aspectos como densidade, dureza superficial e isolamento térmico. Sendo assim, dentre as granulometrias utilizadas neste estudo, a borracha grossa pode ser consider... (Resumo completo, clicar acesso eletrônico abaixo) / Mestre

Two field experiments were conducted on sandy loam soils in OKhahlamba Local Municipality (OLM) (Bergville area), KwaZulu-Natal province in South Africa, during the rainy seasons of 2014/15 and 2015/16 to study the effect of calcium source (gypsum) fertilizer application on yield and quality of groundnut (Arachis hypogaea L.). The household economy of OLM is mostly dependent on agriculture and the majority of farmers in this area are small-scale farmers subsisting mainly on maize (constituting the staple diet) and groundnut production. Crop diversification, therefore, becomes an important aspect for farmers, and this is traditionally done using crops that are produced in almost similar agronomic circumstances to that of maize under dryland conditions. A large proportion of the OLM population depend on groundnut as a vital supplement to their daily food requirements, particularly as a cheap source of protein for resource-poor farmers. Therefore, any scientific approach to increase the yield of groundnut should be considered important in the livelihood of this community. Moreover, groundnut is an excellent rotational crop, since it responds well to fertilizer applied to previous crop and maize, as well as to crop, since it responds well to fertilizer applied to previous crop and maize, as well as to nitrogen left over by peanut. Thus, farmers save money because they use less fertilizer. The consideration for this study was based upon the above. The experiment was laid in a randomised complete block design with factorial arrangement, which was replicated three times in 48 plots. The factors studied were four levels of gypsum (CaSO4.2H2O) i.e. 0 kg/ha, 500 kg/ha, 750 kg/ha, and 1000 kg/ha and four levels of lime (MgCO3.CaCO3) i.e. 0 kg/ha, 250 kg/ha, 500 kg/ha, 750 kg/ha. Soil pH, cation exchange capacity (CEC), electrical conductivity (EC), pod yield, seed yield, 100 seeds weight, shelling percentage, dry shoot weight, seed moisture content percentage at harvest, and leaf calcium concentration data were collected prior to, and post harvesting. The application of 500 kg gypsum/ha alone acted as a liming factor for legumes, decreasing acid stress on nodulating bacteria, and improved soil chemical properties (increased soil pH), vegetative growth, yield, and quality of groundnut. The smallholder famers can afford this application rate, since gypsum acts both as a liming factor and as a calcium source to improve crop yield. The application of 1000 kg gypsum/ha improved seed yield, shelling percentage as well as kernel weight, which is yield, and quality of groundnut under dryland conditions. Since smallholder farmers practise dryland production, it is advisable to adopt the application of gypsum at the rate of 1000 kg/ha to improve yield and quality of groundnuts. It was also found to be more economical than using both gypsum and lime. The application of 500 kg gypsum per hectare in combination with 250 kg lime per hectare produced the highest shelling percentage. This combination of two calcium sources (gypsum and lime) is not recommended for small-scale farmers because it is not economical. The application of 500 kg gypsum per hectare in combination with 750 kg lime per hectare increased pod yield. However, this combination is also not recommended because it is not cost-effective. The application of 1000 kg gypsum per hectare in combination with 500 kg lime per hectare increased seed yield and produced sound mature kernel (SMK), whereas the application of 1000 kg gypsum alone per hectare also increased seed yield. This combination is also considered unacceptable due to the high increase in input costs. The application of 750 kg lime per hectare was more effective as an acid ameliorant and led to the improvement of the chemical composition of the soil (increased soil pH), resulting in a higher shoot weight of groundnut. This application also provided the catalyst for stimulating phosphorus production and enhancing the growth of an extensive root system for absorbing water and nutrients. The use of lime in acid soils is highly beneficial because it improves the chemical composition of the soil, ensures the availability of nutrients to plants, serves as an efficient calcium source, and ultimately leads to an improvement in yield. Results show that the application of gypsum at 1000 kg/ha and lime at 500 kg/ha respectively, significantly improved peanut yield and soil pH. The combination of gypsum and lime (500 kg/ha gypsum and 250 kg/ha lime) significantly improved shelling percentage (yield). Based on data on yield, yield components, and soil chemical properties, it is concluded that gypsum is the best calcium source fertilizer for groundnut production in OLM and lime should only be applied on acid soils to attain optimum groundnut yield in the region / Agriculture, Animal Health and Human Ecology / M. Sc. (Agriculture)

Abstract Lime precipitation has been used for the treatment of mine water for decades; however, the impact of precipitation conditions is not adequately known. In this thesis, four aspects related to the removal of sulphate from mine water by lime precipitation are considered: the effect of magnesium on lime precipitation, the utilisation of by-products in lime precipitation, enhancement of lime precipitation, and utilisation of the precipitate. Sulphate removal in the presence of magnesium at the commonly used lime precipitation treatment pH of 9.6 was found unefficient as magnesium was keeping the sulphate soluble in the form of magnesium sulphate. At higher treatment pH of 11.5, magnesium that was naturally present in the mine water was shown to precipitate as magnesium hydroxide, which could serve as seed crystals for gypsum or co-precipitate sulphate thus enhancing sulphate removal. Quicklime manufacturing generates by-products that, currently, have few applications. The by-products examined in this study were successfully applied for mine water neutralization replacing commercial lime products. These by-products were found to remove sulphate equally well from the mine water. However, differences between by-products were observed in the consumption, and produced sludge quantities and qualities. An enhanced lime precipitation method is the precipitation as ettringite, which was used to reduce the sulphate content in mine water to less than the value set as the drinking water guideline in Finland. Furthermore, the formed precipitate was found to remove arsenate from the model solution. / Tiivistelmä Vaikka kalkkisaostusta on käytetty kaivosten vesienkäsittelyyn useiden vuosikymmenten ajan, tieto olosuhteiden vaikutuksesta käsittelyn tehokkuuteen sulfaatin poiston osalta on puutteellista. Tämä väitöskirja käsittelee sulfaatinpoistoa kaivosvesistä kalkkisaostuksen avulla neljällä eri osa-alueella: magnesiumin vaikutus kalkkisaostukseen, kalkinpolton sivutuotteiden hyödyntäminen kalkkisaostuksessa, kalkkisaostuksen tehostaminen ja muodostuvan saostuman hyödyntäminen. Magnesiumin todettiin kokeellisesti ja laskennallisesti haittaavan sulfaatin poistoa kaivosvedestä kalkkisaostuksessa yleisesti käytetyssä pH:ssa 9.6 pitämällä sulfaattia liukoisessa muodossa magnesiumsulfaattina. Korkeammassa pH:ssa 11.5 puolestaan kaivosveden luontaisesti sisältämän magnesiumin havaittiin kokeellisesti ja laskennallisesti saostuvan magnesiumhydroksidina, joka voi toimia siemenkiteinä kipsille tai kerasaostaa sulfaattia ja siten tehostaa sulfaatin poistoa. Kalkinpolton sivutuotteina muodostuu jakeita, joille ei tällä hetkellä ole juurikaan käyttökohteita. Tässä työssä käytettiin kalkinpolton sivutuotteita korvaamaan kaupallista kalkkia kaivosveden neutraloinnissa. Sivutuotteet poistivat sulfaattia yhtä tehokkaasti kuin kaupalliset kalkkituotteet. Sivutuotteiden välillä havaittiin eroja niiden kulutuksessa sekä muodostuvan lietteen määrässä ja laadussa. Saostuksella ettringiittinä, joka on tehostettu versio perinteisestä kalkkisaostuksesta, saavutettiin sulfaattipitoisuuden lasku alle Suomessa juomavedelle käytetyn suositusarvon. Lisäksi havaittiin muodostuneen ettringiittisaostuman olevan potentiaalinen materiaali arsenaatin poistoon vedestä.

Made available in DSpace on 2014-10-09T12:49:35Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:02:13Z (GMT). No. of bitstreams: 1 09824.pdf: 13805608 bytes, checksum: bb156d35d4219c1080d090fad1bf255b (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP / FAPESP:99/06952-4

Made available in DSpace on 2014-10-09T12:55:26Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:56Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:47:22Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:06:35Z (GMT). No. of bitstreams: 1 08987.pdf: 12180011 bytes, checksum: 91e5a5fc739797e94e5d3cb3f305612c (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP