<p>The work in this thesis focuses on the use of explicit finite element analysis (FEA) in the modelling of fluid-structure interaction of panel-water impacts. Paper A, considers modelling of a two-dimensional rigid wedge impacting a calm water surface. From analytical methods and results of a systematic parameter study a generalised approach for determination of fluid discretization and contact parameters in the modelling of arbitrary hull-water impact situations is developed and presented. In paper B the finite element modelling methodology suggested in paper A is evaluated for elastic structures by a convergence study of structural response and hydrodynamic load. The structural hydroelastic response is systematically studied by a number of FE-simulations of different impact situations concerning panel deadrise, impact velocity and boundary conditions. In paper B a tentative method for dynamic characterization is also derived. The results are compared with other published results concerning hydroelasticity in panel water impacts. The long-term goal of this work is to develop design criteria, by which it can be determined whether the loading situation of a certain vessel type should be regarded as quasi-static or dynamic, and which consequence on the design a dynamic loading has.</p>

<p>Experimental and numerical analysis of loads and responses for planing craft in waves is considered. Extensive experiments have been performed on a planing craft, in full-scale as well as in model scale. The test set-ups and significant results are reviewed. The required resolution in experiments on planing craft in waves, concerning sampling frequencies, filtering and pressure transducer areas, is investigated. The aspects of peak identification in transient signals, fitting of analytical cumulative distribution functions to sampled data, and statistical convergence are treated.</p><p>A method for reconstruction of the momentary pressure distribution at hull-water impact, from measurements with a limited number of transducers, is presented. The method is evaluated to full-scale data, and is concluded to be applicable in detailed evaluation of the hydrodynamic load distribution in time-domain simulations. Another suggested area of application is in full-scale design evaluations, where it can improve the traceability, i.e. enable evaluation of the loads along with the responses with more confidence.</p><p>The presented model experiment was designed to enable time-domain monitoring of the complete hydromechanic pressure distribution on planing craft in waves. The test set-up is evaluated by comparing vertical forces and pitching moments derived from acceleration measurements, with the corresponding forces derived with the pressure distribution reconstruction method. Clear correlation is found.</p><p>An approach for direct calculations of loads, as well as motion and structure response, is presented. Hydrodynamic loads and motion responses are calculated with a non-linear time-domain strip method. Structure responses are calculated by applying momentary distributed pressure loads, formulated from hydrodynamic simulations, on a global finite element model with inertia relief. From the time series output, limiting conditions and extreme responses are determined by means of short term statistics. Promising results are demonstrated in applications, where extreme structure responses derived by the presented approach, are compared with responses to equivalent uniform rule based loads, and measured responses from the full-scale trials. It is concluded that the approach is a useful tool for further research, which could be developed into a rational design method.</p>

The development in structural design and construction of high-speed craft has been extensive during the last decades. Environmental and economical issues have increased the need to develop more optimized structures, using new material concepts, to reduce weight and increase performance efficiency. However, both lack of, and limitations in design methodology, makes this a difficult task. In this thesis a methodological framework which enables detailed studies of the slamming loads and associated responses for high-speed planing craft in irregular waves is established. The slamming loads can either be formulated based on numerical simulations, or on experimental measurements and pressure distribution reconstruction. Structure responses are derived in the time-domain using finite element analysis. Statistical methods are used to determine design loads and lifetime extreme responses. The framework is applied to perform phenomenological studies of the slamming loading conditions for high-speed craft, and used to highlight and quantify the limitations in the prevailing semi-empirical method for design load determination with respect to slamming. A number of clarifications regarding the original derivation and the applicability of the prevailing semi-empirical method are presented. Finally, several potential improvements to the method are presented and the associated implications discussed. The long-term goal of the research project is to establish a method for direct calculation of loads and response for high-speed planing craft, which can enable design of truly efficient craft structures. The methodology and the results presented in this thesis are concluded to be important stepping-stones towards this goal. / <p>In page VII, Paper B is wrong title. The correct title is "Experiental Evaluation of Slamming Pressure Models Used in Structural Design of High-Speed Craft". QC 20130228</p>

The work in this thesis focuses on the use of explicit finite element analysis (FEA) in the modelling of fluid-structure interaction of panel-water impacts. Paper A, considers modelling of a two-dimensional rigid wedge impacting a calm water surface. From analytical methods and results of a systematic parameter study a generalised approach for determination of fluid discretization and contact parameters in the modelling of arbitrary hull-water impact situations is developed and presented. In paper B the finite element modelling methodology suggested in paper A is evaluated for elastic structures by a convergence study of structural response and hydrodynamic load. The structural hydroelastic response is systematically studied by a number of FE-simulations of different impact situations concerning panel deadrise, impact velocity and boundary conditions. In paper B a tentative method for dynamic characterization is also derived. The results are compared with other published results concerning hydroelasticity in panel water impacts. The long-term goal of this work is to develop design criteria, by which it can be determined whether the loading situation of a certain vessel type should be regarded as quasi-static or dynamic, and which consequence on the design a dynamic loading has. / QC 20101126

"The use of advanced materials in the construction of high-speed craft is becoming more commonplace. However, there are certain requirements set in the High Speed Craft Code (published by IMO) that restrict the use of materials based on results from full scale room fire testing (ISO 9705). An obvious benefit would be gained by simulating the results of these full-scale tests using bench scale data from the Cone Calorimeter and LIFT apparatus. A flame-spread algorithm developed by Henri Mitler at the National Institute of Standards and Technology was selected for implementation into the zone fire model CFAST. This algorithm was modified from its original form, so that it could simulate flame spread on wall/ceiling lining materials for both sidewall and corner scenarios, including ISO 9705 as prescribed in the High Speed Craft Code. Changes to the algorithm included geometry of flame spread across the ceiling, flame height, radiation exchange, ignition burner heat flux maps, and multiple pyrolysis zones. The new flame spread algorithm was evaluated against room corner test data from four different marine composite materials tested per ISO 9705."

High speed in waves, necessary in for instance rescue or military operations, often result in severe loading on both the craft and the crew. To maximize the performance of the high-speed craft (HSC) system that the craft and crew constitute, balance between these loads is essential. There should be no overload or underuse of crew, craft or equipment. For small high-speed craft systems, man is often the weakest link. The human exposure to vibration and shock results in injuries and other adverse health effects, which increase the risks for non-safe operations and performance degradation of the crew and craft system. To achieve a system in balance, the human acceleration exposure must be considered early in ship design. It must also be considered in duty planning and in design and selection of vibration mitigation systems. The thesis presents a simulation-based method for prediction and evaluation of the acceleration exposure of the crew on small HSC. A numerical seat model, validated with experimental full-scale data, is used to determine the crew's acceleration exposure. The input to the model is the boat acceleration expressed in the time domain (simulated or measured), the total mass of the seated human, and seat specific parameters such as mass, spring stiffness and damping coefficients and the seat's longitudinal position in the craft. The model generates seat response time series that are evaluated using available methods for evaluation of whole-body vibration (ISO 2631-1 \&amp; ISO 2631-5) and statistical methods for calculation of extreme values. The presented simulation scheme enables evaluation of human exposure to vibration and shock at an early stage in the design process. It can also be used as a tool in duty planning, requirements specification or for design of appropriate vibration mitigation systems. Further studies is proposed within three areas: investigation of the actual operational profiles of HSC, further development of seat models and investigation of the prevailing injuries and health problems among the crew of HSC. / <p>QC 20150126</p>

A planing catamaran is a high-powered, twin-hull water craft that develops the lift which supports its weight, primarily through hydrodynamic water pressure. Presently, there is increasing demand to further develop the catamaran's planing and seakeeping characteristics so that it is more effectively applied in today's modern military and pleasure craft, and offshore industry supply vessels. Over the course of the past ten years, Vorus (1994,1996,1998,2000) has systematically conducted a series of research works on planing craft hydrodynamics. Based on Vorus' planing monohull theory, he has developed and implemented a first order nonlinear model for planing catamarans, embodied in the computer code CatSea. This model is currently applied in planing catamaran design. However, due to the greater complexity of the catamaran flow physics relative to the monohull, Vorus's (first order) catamaran model implemented some important approximations and simplifications which were not considered necessary in the monohull work. The research of this thesis is for relieving the initially implemented approximations in Vorus's first order planing catamaran theory, and further developing and extending the theory and application beyond that currently in use in CatSea. This has been achieved through a detailed theoretical analysis, algorithm development, and careful coding. The research result is a new, complete second order nonlinear hydrodynamic theory for planing catamarans. A detailed numerical comparison of the Vorus's first order nonlinear theory and the second order nonlinear theory developed here is carried out. The second order nonlinear theory and algorithms have been incorporated into a new catamaran design code (NewCat). A detailed mathematical formulation of the base first order CatSea theory, followed by the extended second order theory, is completely documented in this thesis.