Doctor of Philosophy / Department of Chemical Engineering / Jennifer L. Anthony / Zeolites and zeolite-like materials are a group of porous materials with many applications in industry including but not limited to detergent builders and catalyst in the oil refining and petrochemical industry, due to their unique properties such as uniform pore size, large surface area and ion-exchange capacity. Researchers are constantly seeking new methods to synthesize zeolites. Zeolites are commonly synthesized in water. Then in 2004, a new method called ionothermal synthesis was invented by Dr. Morris and his colleagues, using ionic liquids (ILs) and eutectic mixtures as the solvent. In contrast to water, ILs and eutectic mixtures have negligible vapor pressure, thus making the use of high-pressure vessel unnecessary. In addition, they have various structures which could render new structures to frameworks of zeolite. Furthermore, since the cations of some ILs have structures which are similar to common structure directing agents, they theoretically could be used both as solvent and structure directing agent in ionothermal synthesis, possibly simplifying the synthesis process. This project is aimed at investigating the behavior of precursors of zeolites in ionic liquids and the interaction between precursors and ionic liquids in ionothermal synthesis because these fundamental properties could be useful in the current and future synthesis of zeolites. First, solubilities of different precursors, including Syloid 63 silica particles, aluminium isopropoxide (Al(OiPr)3) and phosphoric acid (H3PO4) in ILs with different structures are reported. Parameters such as activity coefficient and Henry’s constant are calculated from the solubility result. Second, interaction between precursors and ILs are studied. It is found that the addition of ILs in Al(OiPr)3 could change the structure of Al(OiPr)3, especially with the presence of H3PO4. Both ILs’ structures and temperature are capable of influencing the structure change of Al(OiPr)3. Third, hydrochloric acid is used for the first time as the mineralizer to synthesize aluminophosphates in ILs and it could lead to both dense and porous materials. Regardless of the acid used, frameworks synthesized after several hours always undergo a dramatic change after further heating. A slightly longer alkyl chain of ILs could accelerate the formation of crystalline materials. Increasing concentration of precursors in the reaction gel could increase the yield, but the same framework is not retained. Researches have also been done on stability of ILs in the synthesis process and it is found that heat and the presence of H3PO4 could decompose ILs, but the decomposed amount is extremely small.

Conventionally, crystalline microporous materials such as zeolites and metal-organic frameworks (MOFs) are synthesized through the hydrothermal route or the trial-and-error approach. Other synthetic strategies may lead to the synthesis of microporous materials with new architectures or interesting properties. The general aim of this thesis is to investigate some new synthetic routes towards crystalline microporous materials. A top-down and post-synthesis method is reported in Chapter 4. Some zeolites are built up by layers and double-4-ring pillars. Germanium is preferentially located in the double-4-ring sites of a zeolite framework and is hydrolytically unstable. The idea of the top-down method is to disassemble these zeolites to the layer structures by dissolving the Ge-containing pillars and reassemble them to a new framework. This method is applied to the germanosilicate IWW and ITH zeolites for the first time. The effects of framework chemical compositions, Ge distributions and disassembling conditions on the top-down treatment process are investigated. The products obtained from the top-down treatment are characterised. An ionic liquid assisted strategy for the synthesis of zeolites is described in Chapter 5. The ionic liquid assisted strategy is a solvent free reaction. The raw materials are transformed to zeolites through a solid state reaction. The ionic liquids are first used as structure-directing agents (SDAs) in this solvent free reaction to replace the expensive quaternary ammonium hydroxide. A TON zeolite is synthesized using 1-ethyl-3-methylimidazolium bromide as the SDA. Moreover, the ionic liquid assisted strategy is considered as a “green chemistry” synthetic route due to the high yield of the zeolites and the minor production of waste water. Many aluminophosphates have been successfully synthesized through ionothermal routes. Most of them are synthesized using 1-alkyl-3-methylimidazolium based ionic liquids. A new ionic liquid, 1-(2-hydroxyl-ethyl)-3-methylimidazolium chloride ([HOEmim]Cl), is prepared and used for the ionothermal synthesis of aluminophosphate materials. A zeolite analogue with the CHA framework has been synthesized. At high synthetic temperatures, the products are large single crystals. The structures of the framework and the SDA are investigated by single crystal diffraction and other characterisation methods. Flexible MOF materials are usually synthesized by a trial-and-error approach. Recently a flexible MOF compound was synthesized using 5-sulfoisophthalic acid (SIP) as the ligand. It was proposed the sulfonate is weakly coordinated to the metal, which brings flexibility to the compound, and the carboxylate groups keep the framework intact. 2-sulfoterephthalic acid (STP) which also contains one sulfonate group and two carboxylate groups is believed to be an alternative ligand for the targeted synthesis of flexible MOFs. In Chapter 7, a MOF compound is synthesized using STP and 4, 4'-bipyridine (Bpy) as ligands to validate the proposed strategy can be generalized. Variable temperature single crystal diffraction analysis solves the structure and reveals a reversible structure transformation upon dehydration and rehydration.

L’eau sous forme dissoute, émulsifiée ou libre est l’une des contaminants les plus nocifs pour les huiles lubrifiantes. Sa concentration élevée dans les lubrifiants conduit à la dégradation et à la corrosion des ces derniers ainsi qu’à une usure excessive et un endommagement des surfaces métalliques lubrifiées. Vu les effets destructifs de la présence de l’eau dans les huiles lubrifiantes, le contrôle de leur teneur en eau semble indispensable afin de prolonger simultanément la durée de vie des lubrifiants et celle des machines. L’objectif de cette étude est de contrôler et réduire le contenu en eau des huiles lubrifiantes via des techniques d’adsorption ; techniques assez efficaces et écologiques pour remplacer la méthode traditionnelle de distillation. Afin de réaliser ce but, des matériaux microporeux et hydrophiles ont été choisis et préparés dans les buts de i) piéger l’eau au cours de la purification des huiles et ii) contrôler la quantité d’eau et le degré de dégradation durant le processus d’oxydation des huiles, ceci en utilisant les matériaux microporeux en tant qu’additifs. L’étude consiste premièrement en une sélection, une synthèse et une caractérisation des capacités de sorption d’eau de plusieurs matériaux microporeux, hydrophiles et de tailles nanométriques. D’abord, une synthèse écologique de tamis moléculaires de tailles nanométriques par chauffage aux micro-ondes a été développée. Cette méthode permet la réutilisation des réactifs non réagis réduisant ainsi, voire éliminant, les déchets résultant de la synthèse. Par conséquent, des rendements raisonnables de matériaux microporeux nanocristallins sont produits avec un coût et une toxicité remarquablement réduits. De plus, l’utilisation des irradiations micro-ondes permet la préparation de nanocristaux de matériaux microporeux en quelques minutes lorsque la synthèse par voie hydrothermale nécessite quelques jours. Ceci rend la synthèse fiable de point de vue économique et environnemental. Ensuite, une préparation de nanocristaux d’aluminophosphates en présence d’un liquide ionique a été reportée. Le liquide ionique joue un rôle double : en tant qu’agent permettant le remplissage des pores des matériaux synthétisés et en tant que solvant. Egalement, le liquide ionique n’ayant pas réagi est récupéré à la fin de la synthèse pour être réutilisé avec d’autres lots. Pour la vi préparation de cristaux nanométriques d’aluminosilicates, ayant une teneur importante en aluminium, des synthèses ont eu lieu à partir de systèmes ne contenant pas de structurants organiques, à basse températures (30-50 °C) et à faibles durées de synthèse (1-3 jours). La totalité des matériaux obtenus présentent de volumes poreux importants et une grande capacité d’eau répondant aux exigences de bons adsorbants hydrophiles. Dans le but d’augmenter la durée de vie des lubrifiants, un éco-recyclage de différentes huiles minérales et végétales a été mis en évidence par une adsorption sélective d’eau sur les nanocristaux de matériaux microporeux. [...] / Water in solution, emulsion and separate form is one of the most harmful contaminants in lubricant oils. The high concentration of water in lubricants leads to oil degradation, corrosion, excessive wear and premature failure of lubricated metal surfaces. As water has such destructive effects on lubricants, a special attention to the control of the water level has to be paid in order to prolong the lifetime of both lubricants and machinery. The aim of this work is to control and reduce the water content in lubricant oils using adsorption technique as an effective and green alternative to replace the traditional distillation method. In order to achieve this goal, microporous materials with hydrophilic properties were selected and prepared to (i) capture the water during static oil purification and (ii) apply as additives to control the water level and degradation during the oxidation process of lubricating oils. The study starts with the selection, synthesis and characterization of water sorption behavior of several hydrophilic microporous materials with nanosized dimensions. Additionally, an environmentally benign synthesis of the nanosized molecular sieves by microwave heating involving an efficient re-utilization of nonreacted materials has been developed, resulting in decrease and almost no related wastes. Thus the quantity of expensive and toxic chemicals is reduced. This approach results in a reasonable crystalline yield of the nanomaterials, while the production cost is remarkably lowered. In addition, the use of microwave irradiation leads to a preparation of nanocrystalline material within several minutes instead of days compared to conventional heating, which makes the process economically viable and environmentally benign. Additionally, the preparation of discrete nanosized aluminophosphate crystals by an ionic liquid mediated approach is reported. The ionic liquid has a dual function, as pore filling agent and solvent. In addition, the non-reacted ionic liquid after the syntheses are recovered and reused for several batches. For the preparation of aluminosilicates, template-free syntheses of nanosized aluminosilicate crystals with high Al content have been carried out. They were synthesized at low temperature (30-50 °C) for short time (1- ix 3 days). All resulting materials have high pore volume and high water capacity, which meet the expected requirements for highly hydrophilic sorbents. Eco-recycling of mineral and vegetable oils for an increase of lubricant lifetime by selective adsorption of water using the microporous nanocrystals was carried out. The oils were oxidized and purified with the molecular sieves. The processes of oxidation and purification of the two types of oil is followed by Fourier transform infrared spectroscopy (FT-IR), atomic absorption spectroscopy (AAS), Karl Fischer (KF) titration, thermogravimetry analysis (TGA) and gas chromatography-mass spectrometry (GC-MS). In addition, FT-IR combined with a solvent (dimethyl sulfoxide, DMSO) extraction method is used to quantify the water content in lubricant oils, which rivals the accuracy of the classical KF titration; it is deemed to be an alternative analytical method for water content determination. The influence of treatment parameters including zeolite type, crystal size, temperature, sorbent loading and treatment time on the purification process of oxidized oil was studied. In addition, the hydrophilic microporous materials were applied as additives for controlling the water content and inhibiting the oxidation of oil. It is found that aluminosilicates control the water content and inhibit the oil degradation better at elevated temperatures, while aluminophosphates have an improved performance at mild conditions (< 90?C). Moreover, the oxidative stabilities of vegetable oils in the presence of the microporous additives are related to their poly-unsaturation contents. [...]

An exploration of some organic-inorganic hybrid metal fluorides and lanthanide containing metal organic frameworks (Ln-MOFs) has been carried out under ionothermal conditions. In this synthesis technique an ionic liquid (IL) or deep eutectic mixture (DES) is used as the solvent and in many cases as the provider of the organic structure directing agent. A wide range of ILs and DESs have been investigated as the reaction solvent for the synthesis of organically templated vanadium fluorides and oxyfluorides (VOFs), and initially this has proved to be successful with the isolation of 13 phases, including eight new materials. In the VOFs synthesis the IL acts as a solvent, however the DES acts as a solvent and also as a template delivery agent, where the expected template is provided by the partial breakdown of the urea derivative component. Interestingly, it has been shown that the same structure can be accessible via two different ways; either by using IL with an added templating source, or simply through the use of a DES without any other additive; since the template is provided by the in situ breakdown of the DES. The synthesis of VOFs with extended structures was achieved by the use of the hydrophobic IL 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIM Tf₂N) as the solvent. [HNC₅H₅][V₂O₂F₅] represents the first VOF with a 2D network that contains exclusively V⁴⁺. This material may be considered as arising via condensation of the previously known ladder-like chains. Furthermore, using imidazole as an added template has produced another layer material that has significant similarities to the [HNC₅H₅][V₂O₂F₅] structure, but with some key differences. Within the same system three other phases were also isolated, including two novel materials displaying the known ladder-type building units. Further investigations in the ionothermal synthesis of VOF using EMIM Tf₂N resulted in a successful synthesis of [NH₄]₂[HNC₇H₁₃][V₇O₆F₁₈], a novel material displaying a unique double layered topology featuring a S = ½ kagome type lattice of V⁴⁺ ions (d¹). Two of the V⁴⁺ based kagome sheets are pillared by V³⁺ ions to form a double layered structure templated by both ammonium and quinuclidinium cations. This compound exhibits a high degree of magnetic frustration, with significant antiferromagnetic interactions but no long range ordering was observed above 2 K. This material presents an interesting comparison to the famous Herbertsmithite, ZnCu₃(OH)₆Cl₂, and may provide an excellent candidate for realising a quantum spin liquid (QSL) ground state. Interestingly, in this system the use of EMIM Tf₂2N as a solvent produces mainly V⁴⁺-containing materials, despite the high reaction temperature (170 °C). This characteristic is unprecedented in VOFs synthesis, as rising the reaction temperature above 150 °C in other techniques (i.e. hydrothermal synthesis) would often result in further reduction of V⁴⁺ to V³⁺. Using the ionothermal technique in the synthesis of hybrid iron fluorides resulted in the isolation of three chain-type materials. Again, the IL acts as the solvent and the DES acts as the solvent and also as the template provider where the expected template is released by the partial breakdown of the urea derivative component of the DES. The synthesis of Ln-MOF using a choline chloride/ 1,3-dimethylurea deep eutectic mixture has produced three novel isostructural materials. Usually, in ionothermally prepared materials (i.e. zeolites) the urea portion of the DES is unstable and breaks down in situ to form ammonium or alkylammonium cations. In the ionothermal synthesis of Ln-MOF, 1,3-dimethyurea (DMU) remains intact and is occluded in the final structure. Using a choline chloride/ethylene glycol deep eutectic solvent led to the isolation of a Ln-MOF with interesting structural properties, however none of the DES components appeared in the final structure. These results demonstrate once more the usefulness and applicability of the ionothermal synthesis method and emphasise how this synthesis technique can be further extended and applied in the preparation of important structures with unique properties and functionalities.

In the first section of the thesis graphitic carbon nitride was for the first time synthesised using the high-temperature condensation of dicyandiamide (DCDA) – a simple molecular precursor – in a eutectic salt melt of lithium chloride and potassium chloride. The extent of condensation, namely next to complete conversion of all reactive end groups, was verified by elemental microanalysis and vibrational spectroscopy. TEM- and SEM-measurements gave detailed insight into the well-defined morphology of these organic crystals, which are not based on 0D or 1D constituents like known molecular or short-chain polymeric crystals but on the packing motif of extended 2D frameworks. The proposed crystal structure of this g-C3N4 species was derived in analogy to graphite by means of extensive powder XRD studies, indexing and refinement. It is based on sheets of hexagonally arranged s-heptazine (C6N7) units that are held together by covalent bonds between C and N atoms. These sheets stack in a graphitic, staggered fashion adopting an AB-motif, as corroborated by powder X-ray diffractometry and high-resolution transmission electron microscopy. This study was contrasted with one of many popular – yet unsuccessful – approaches in the last 30 years of scientific literature to perform the condensation of an extended carbon nitride species through synthesis in the bulk. The second section expands the repertoire of available salt melts introducing the lithium bromide and potassium bromide eutectic as an excellent medium to obtain a new phase of graphitic carbon nitride. The combination of SEM, TEM, PXRD and electron diffraction reveals that the new graphitic carbon nitride phase stacks in an ABA’ motif forming unprecedentedly large crystals. This section seizes the notion of the preceding chapter, that condensation in a eutectic salt melt is the key to obtain a high degree of conversion mainly through a solvatory effect. At the close of this chapter ionothermal synthesis is seen established as a powerful tool to overcome the inherent kinetic problems of solid state reactions such as incomplete polymerisation and condensation in the bulk especially when the temperature requirement of the reaction in question falls into the proverbial “no man’s land” of classical solvents, i.e. above 250 to 300 °C. The following section puts the claim to the test, that the crystalline carbon nitrides obtained from a salt melt are indeed graphitic. A typical property of graphite – namely the accessibility of its interplanar space for guest molecules – is transferred to the graphitic carbon nitride system. Metallic potassium and graphitic carbon nitride are converted to give the potassium intercalation compound, K(C6N8)3 designated according to its stoichiometry and proposed crystal structure. Reaction of the intercalate with aqueous solvents triggers the exfoliation of the graphitic carbon nitride material and – for the first time – enables the access of singular (or multiple) carbon nitride sheets analogous to graphene as seen in the formation of sheets, bundles and scrolls of carbon nitride in TEM imaging. The thus exfoliated sheets form a stable, strongly fluorescent solution in aqueous media, which shows no sign in UV/Vis spectroscopy that the aromaticity of individual sheets was subject to degradation. The final section expands on the mechanism underlying the formation of graphitic carbon nitride by literally expanding the distance between the covalently linked heptazine units which constitute these materials. A close examination of all proposed reaction mechanisms to-date in the light of exhaustive DSC/MS experiments highlights the possibility that the heptazine unit can be formed from smaller molecules, even if some of the designated leaving groups (such as ammonia) are substituted by an element, R, which later on remains linked to the nascent heptazine. Furthermore, it is suggested that the key functional groups in the process are the triazine- (Tz) and the carbonitrile- (CN) group. On the basis of these assumptions, molecular precursors are tailored which encompass all necessary functional groups to form a central heptazine unit of threefold, planar symmetry and then still retain outward functionalities for self-propagated condensation in all three directions. Two model systems based on a para-aryl (ArCNTz) and para-biphenyl (BiPhCNTz) precursors are devised via a facile synthetic procedure and then condensed in an ionothermal process to yield the heptazine based frameworks, HBF-1 and HBF-2. Due to the structural motifs of their molecular precursors, individual sheets of HBF-1 and HBF-2 span cavities of 14.2 Å and 23.0 Å respectively which makes both materials attractive as potential organic zeolites. Crystallographic analysis confirms the formation of ABA’ layered, graphitic systems, and the extent of condensation is confirmed as next-to-perfect by elemental analysis and vibrational spectroscopy. / Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung neuer Allotropen und Nanostrukturen von Karbonitriden und berührt einige ihrer möglichen Anwendungen. Alle gezeigten, ausgedehnten, kovalent verbundenen Karbonitridgerüste wurden in einem ionothermalen Syntheseprozess – einer Hochtemperaturbehandlung in einem eutektischen Salzgemisch als ungewöhnlichem Lösungsmittel – aus einfachen Präkursormolkülen erzeugt. Der Kondensationsmechanismus folgt einer temperaturinduzierten Deaminierung und Bildung einer ausgedehnten, aromatischen Einheit; des dreifach substituierten Heptazines. Die Dissertation folgt vier übergreifenden Themen, beginnend mit der Einleitung in Karbonitridsysteme und der Suche nach einem Material, welches einzig aus Kohlenstoff und Stickstoff aufgebaut ist – einer Suche, die 1834 mit den Beobachtungen Justus von Liebigs „über einige Stickstoffverbindungen“ begann. Der erste Abschnitt zeigt die erfolgreiche Synthese von graphitischem Karbonitrid (g-C3N4); einer Spezies, welche auf Schichten hexagonal angeordneter s-Heptazineinheiten beruht, die durch kovalente Bindungen zwischen C- und N-Atomen zusammengehalten werden, und welche in einer graphitischen, verschobenen Art und Weise gestapelt sind. Der zweite Abschnitt berührt die Vielfalt von Salzschmelzensystemen, die für die Ionothermalsynthese geeignet sind und zeigt auf, dass die bloße Veränderung der Salzschmelze eine andere Kristallphase des graphitischen Karbonitrides ergibt – das g-C3N4-mod2. Im dritten Abschnitt wird vom Graphit bekannte Interkallationschemie auf das g-C3N4 angewendet, um eine Kalliuminterkallationsverbindung des graphitischen Karbonitirdes zu erhalten (K(C6N8)3). Diese Verbindung kann in Analogie zum graphitischen System leicht exfoliiert werden, um Bündel von Karbonitridnanoschichten zu erhalten, und weist darüberhinaus interessante optische Eigenschaften auf. Der vierte und letzte Abschnitt handelt von der Einführung von Aryl- und Biphenylbrücken in das Karbonitridmaterial durch rationale Synthese der Präkursormoleküle. Diese ergeben die heptazinbasierten Frameworks, HBF-1 und HBF-2 – zwei kovalente, organische Gerüste.

Ionic liquids (ILs) are able to activate elements that are insoluble in common solvents. Here, the synthesis of binary antimony compounds directly from elements was explored. The 12 elements Ti-Cu, Al, Ga, In, and Te, known to form binary compounds with Sb, were reacted with Sb in [P₆₆₆₁₄]Cl under inert conditions in a closed glass flask with vigorous stirring for 16 h at 200 °C. This was immediately successful in four cases and resulted in the formation of NiSb, InSb, Cu₂Sb and Sb₂Te3. The applied reaction temperature is several hundred degrees below the temperatures required for solvent-free conversions. Compared to reactions based on diffusion in the solid state, reaction times are much shorter. The IL is not consumed and can be recycled. Since the reaction with Cu showed almost complete conversion, the influences of reaction time, temperature and medium were further investigated. Among the tested imidazolium ILs ([BMIm]Cl, [BMIm][OAc], [BDMIm]Cl) and phosphonium ILs ([P₆₆₆₁₄]X, X=Cl⁻, [DCA]⁻, [OAc]⁻, [NTf₂]⁻), those with chloride anion yielded the best results. In a diffusion experiment, Cu₂Sb formed on the copper, which indicates that antimony forms mobile species in these ILs. Supplemental crystal structure data of (As₃S₄)[AlCl₄], which was ionothermally synthesized from As and S, are reported.

Transition-metal chemistry in ionic liquids (IL) has achieved intrinsic fascination in the last few years. The use of an IL as environmental friendly solvent, offers many advantages over traditional materials synthesis methods. The change from molecular to ionic reaction media leads to new types of materials being accessible. Room-temperature IL have been found to be excellent media for stabilising transition-metal clusters in solution and to crystallise homo- and heteronuclear transition-metal complexes and clusters. Furthermore, the use of IL as solvent provides the option to replace high-temperature routes, such as crystallisation from the melt or gas-phase deposition, by convenient room- or low-temperature syntheses. Inorganic IL composed of alkali metal cations and polynuclear transition-metal cluster anions are also known. Each of these areas will be discussed briefly in this contribution. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Ionic liquids (ILs) have made a great impact on materials science and are being explored for potential applications in several disciplines. In this article, we briefly highlight the current state-of-the-art techniques employing ILs as new crystallisation media, working as neutral solvent, template or charge compensating species. The use of an IL as environmental friendly solvent offers many advantages over traditional crystallisation methods. The change from molecular to ionic reaction media leads to new types of materials being accessible. Room temperature ILs have been found to be excellent solvent systems for the crystallisation of a wide range of substances and morphologies ranging from nanoscopic crystals to micro- and even to macroscopic crystals. Moreover, high temperature routes, such as crystallisation from melts or gas phase deposition, have been replaced by convenient room or low temperature syntheses, employing ILs as reaction media. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Transition-metal chemistry in ionic liquids (IL) has achieved intrinsic fascination in the last few years. The use of an IL as environmental friendly solvent, offers many advantages over traditional materials synthesis methods. The change from molecular to ionic reaction media leads to new types of materials being accessible. Room-temperature IL have been found to be excellent media for stabilising transition-metal clusters in solution and to crystallise homo- and heteronuclear transition-metal complexes and clusters. Furthermore, the use of IL as solvent provides the option to replace high-temperature routes, such as crystallisation from the melt or gas-phase deposition, by convenient room- or low-temperature syntheses. Inorganic IL composed of alkali metal cations and polynuclear transition-metal cluster anions are also known. Each of these areas will be discussed briefly in this contribution. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Ionic liquids (ILs) have made a great impact on materials science and are being explored for potential applications in several disciplines. In this article, we briefly highlight the current state-of-the-art techniques employing ILs as new crystallisation media, working as neutral solvent, template or charge compensating species. The use of an IL as environmental friendly solvent offers many advantages over traditional crystallisation methods. The change from molecular to ionic reaction media leads to new types of materials being accessible. Room temperature ILs have been found to be excellent solvent systems for the crystallisation of a wide range of substances and morphologies ranging from nanoscopic crystals to micro- and even to macroscopic crystals. Moreover, high temperature routes, such as crystallisation from melts or gas phase deposition, have been replaced by convenient room or low temperature syntheses, employing ILs as reaction media. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.