Content of the Diploma thesis is the design documentation a block of flats with trade gallery in Tábor. The design documentation and annexes of diploma thesis are elaborated according to present valid laws, goverment´s restrictions and standards. This object is located on plot no. 1457/33 and 1457/1 cadastre unit Tábor. The building is situated in area designated to housing development. Next to the land are there public infrastructure. The apartment building is divided into 20 flats including one accessible flat and café for 60 customers and max 5 employees. Flats are located from second floor except accessible flat, which is in grounfloor. In grounfloor is common storage area and utility room. Building has four (above-ground) floor. Object is dimensioned 31,7 x 25,2 m and high 13,6 m.The object is builded on finished grade. Load-bearing structural systém is from hollow bricks. Building has flat roof and whole object is thermal insulated.

The diploma thesis deals with preparation and realization of D1 reconstruction of D1-212 bridge in Ostrovačice. It is a motorway bridge that transfers traffic over road II / 386. The reconstruction will demolish the superstructure of bridge with bridge equipment and parts of the abutments and their new construction. The preparation of the project solves the engineering report, the block plan drawing, the financial and time schedule - by objects, the budget SO 201, the study of the implementation of the main construction technologys, the project of the site equipment, the design of the main building machines, the SO 201 time schedule, a desigh of the bill of quantities for structure, technical note for superstructure of a bridge and control and test plans. Part of the preparation of the building is the processing of the emergency plan.

This diploma thesis deals with construction-technological project of mixed-use building in Olomouc. The thesis contains a technical report, the coordination situation of the construction, the time and financial plan, the study of the main technological stages, the project of site equipment, the design of the main building machines and mechanisms, the time schedule, the budget, the technology prescription for the contact thermal insulation systém, the quality control and test plan, the plan of safety and the comparison of ETICS with polystyrene and mineral wool.

This diploma’s dissertation is on project of a new hotel building with three aboveground and one underground floors. This study starts at the building stage and focuses on the construction details and energy demands of the building. Also included is a fire safety solution for the new hotel building. The layout and architectural desing is according to the investor´s requirements, with respect to applicable laws, regulations, standards. Traditional materials are designed for the new building, taking into account the latest developments in the construction industry.

The thesis is composed of three parts - theoretical, computational and a project part. The theoretical part deals with heat sharing through conduction, flow and radiation. The computational part is focused on the overall calculation of the heating system to operate smoothly and reliably. Three gas condensing boilers are designed as a source of heat. The heating of the water is solved as a reservoir. It's source of heat is one gas condensation boiler. The project part contains a technical report and the project documentation on the stage of the implementation dossier.

This thesis deals with the computational comparison of the energy performance of buildings of various construction materials. The work aims at assessing the building as a thermal system. The theoretical part describes the methods for calculating the energy performance of buildings. The experimental part of the work focuses on quantifying the heat consumption of specific buildings in terms of thermal stability and it is later compared with the results calculated in accordance with the applicable technical standards.

This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.

Tato diplomová práce je zaměřena na sestavení přehledu konstrukcí a teplených cest kosmických lodí a kosmických vozidel, které se v současné době používají. Na základě specifických požadavků a standardů jsou vypracovány koncepční návrhy zástavby tepelného spínače do konstrukce družice. V jednotlivých kapitolách jsou popsány určité členy, které se na vedení tepla podílí a jsou důležité pro navrhované koncepty z pohledu konstrukce. Diplomová práce popisuje postupy výpočtu tepelných vodivostí a rozložení působící tíhové síly do míst uchycení pro jednotlivé koncepty. Na závěr provádí hodnocení a výběr potenciálně nejvhodnějšího návrhu.

The diploma thesis deals with the elaboration of a laboratory experiment with basic types of microstrip directional and hybrid couplers in the frequency range up to tens GHz. The thesis is concerned on branch line directional coupler, rat-race directional coupler, De Rondeho coupler, coupled-line coupler, and Lange directional coupler. Simulated results are confronted with measured results obtained by a skalar network analyzer. From overall findings the relevant laboratory experiment was configured and designed.

This thesis is elaborated for the preparation and organization of the construction of multi-functional home for hospital in Breclav. It is a complex of three buildings of which the first two are terraced houses and a third garage. Individual objects are divided into units according to the expansion section. My job is processed for the object SO02 - section 4.5. The supporting system consists of reinforced concrete columns and ceilings filled with bricks Porotherm. The roof is designed as a horizontal single casing.