The contents of the diploma thesis is the elaboration of project documentation for the construction of a sports center. It´s a building with three floors, ie. two floors and basement. The building has a partial basement. In the building are sports facilities for fitness, squash courts, wellness, office spaces for employees and management. On the ground floor there is also a canteen with operating facilities. The main entrance is located on the west side of the proposed parking lot. The building can be entered on the south and east side of the building through the canteen and a side staircase. A total of seventy-eigth parking places are designed in the center, four of which are for people with reduced mobility and orientation. The building is designed of ceramic bricks with a two–way construkction system and insulated ETICS system. The facade of the building is partly contact and partly ventilated. Elements for green walls are used on the walls. The building is covered with a flat green extensive roof.

The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.

This diploma thesis deals with construction and technological solution of hotel Nábřeží near Kunovská dam. The aim of this work is to choose the appropriate construction process of rough construction. Thesis contains technical report of main object, technological prescription and test plan for reinforced concrete ceiling, work plan and schedule of work also project of site equipment, main construction machinery and noise measurement survey. Further there is financial and time demand comparison of existing and alternative design of vertical load-bearing system in the connection with thermal insulation.

This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.

This diploma work consists of theorethical and practical part. The theorethical part contains general characteristics of difficult life situations as stress, frustration and conflict. There are also mentioned techniques and factors for coping difficult life situations. The practical part contains a research, which deals perception difficult life situations by adolescents. The research was carried out by two questionnaires. At the end of the practical part there is a summary and an evaluation of results.

Diplomová práce se zabývá možnosti kalibrace experimentálního testovacího zařízení. Zejména se věnuje návrhu termálního matematického modelu popisujícího tepelné procesy uvnitř zařízení v průběhu měření tepelné vodivosti vzorku. První část práce je věnována seznámení se s testovacím zařízením, jeho limity a principem měření. Popisuje řešení třetí verze testovací komory, společně s nezbytnými úpravami, provedenými za účelem zajištění předepsaných simulačních podmínek. Zmiňuje také potřebu a důvody kalibrace. Druhá část je především zaměřená na návrh kalibračních vzorků a termálního modelu. Uvádí definované požadavky a konečné vlastnosti vyrobených vzorků. Matematický model prezentuje postup výpočtu zjištěných tepelných ztrát a poukazuje na možnosti jejich zpřesnění. Testování kalibračních vzorků bylo provedeno na nově zprovozněné třetí verzi testovací komory. Naměřené výsledky poslouží k ladění termálního modelu, nezbytného k dokončení kalibračního procesu, který umožní přikročení k další fázi testování v experimentální komoře.

This thesis theoretically in Part A deals with the solution in savings heating building and heating hot water. It examines the impact of austerity measures on the overall need for and consumption of heat energy and its economic impact and compared with each other in order to achieve maximum efficiency. Part B is their subsequent application to a given object - a residental building, various design alternatives and the resulting energy savings improvements. Experimental Part C deals with indirect measurement of the thermal conductivity of building materials.

The topic of the master’s thesis is the design basic school for the first and second stage, which is located in the part of Pardubice named Pardubičky. It is a four-storey building, where you will find a total of 18 ordinary classrooms and other specialized classrooms (for example computer lab, physics lab, chemistry lab). The building is designed for 540 students. The building is built of brick Heluz system, the roof is flat. Each floor is hygienic facilities for both boys, girls, and for teachers and for persons with reduced mobility. In the ground floor are locker rooms, classrooms and sanitary facilities. In second floor are classrooms, facilities for teachers and cabinets. In the third floor are ordinary and specialized classrooms and fourth floor is engine room for air conditioning, and classrooms. Entry to the building is wheelchair accessible, the building has elevators.

The topic of the masters thesis is newly built sports center in Broumov on the outskirts of the historic center. The proposal was placed high demands on appearance. There is a non-traditional stone facade with a combination of wood ventilated facades. The combination of wood and stone construction gives a historic feel and fit and existing buildings, which will carry the dominant built-up area. The new building is set into the sloping terrain with a flair for existing buildings. The building is part sunk into the ground to reduce the height to the surrounding area. The sports center is divided into three dilatations objects: Technical facilities, sports hall, bowling with squash and gym.

Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.