<p>   Contamination of surface and ground water from industrial wastes and anthropogenic activities represents one of the greatest challenges to the sustainable development of human society. Heterogeneous photocatalysis, a kind of advanced oxidation process characterized by the production of highly oxidative hydroxyl radicals, is a relatively novel subject with tremendous potential in water treatment applications.</p><p>    The purpose of this research was first to develop feasible hydroxyl radical detection methods, which can be used to evaluate efficiency of photocatalytic process, and second to prepare immobilized TiO2 films with high photocatalytic activities by the sol gel method.</p><p>    The feasibility of Indigo carmine and phthalic hydrazide as OH-radical probes was investigated. The organic dye Indigo carmine absorbs visual light strongly at 610 nm and its destruction can be monitored conveniently in a spectrophotometer. Results showed that both ^·OH and HO₂^·can bleach Indigo carmine, and the bleaching yield of ^·OH was pH independent. The photocatalytic dye bleaching in black light UV illuminated Degussa P25 TiO2 aerated suspensions was then investigated. A strong pH dependency of the bleaching yield was found.  This implies that the quantum yield of OH radical at pH 3 is one fourth compared to that at pH 10. The reaction of the OH radical with phthalic hydrazide will form strongly chemiluminescent 3-hydroxyphthalic hydrazide. Using the more specific phthalic hydrazide as OH radical probe, an even stronger pH dependent quantum yield of OH radical was found. At pH 10 the quantum yield reached the same magnitude as that obtained by using Indigo carmine, whereas the quantum yields at acidic pH were close to zero. However it was found that the addition of phosphate and fluoride anions can substantially enhance the OH radical yield at acidic pH by blocking the adsorption of phthalic hydrazide onto the TiO2 surfaces. Hence the adsorption of phthalic hydrazide to TiO2 is an important factor to consider when this method is used. <em></em></p><p>    Photocatalytic TiO2 films coated on metal plates were prepared by a sol gel method using titanium isopropoxide as TiO2 precursor and isopropanol as solvent. The photocatalytic activity of the obtained films was evaluated by bleaching of indigo carmine at pH 9 under black light UV irradiation. The effect of the molar ratio of isopropanol, water and hydrochloric acid to titanium isopropoxide was studied. It was also shown that the activities of TiO2 films are considerably influenced by calcination temperature, coating cycles and the supporting materials.</p> / <p>    Förorening av yt- och grundvatten från industrier och humana aktiviteter utgör en av de största utmaningarna för en hållbar utveckling av det mänskliga samhället. Heterogen fotokatalys, en slags avancerad oxidations process som kännetecknas av att starkt oxidativa hydroxylradikaler produceras, är en relativt ny teknik med stor potential för vattenrening.</p><p>    Ett syfte med detta licentiatarbete var först att utveckla och genomföra olika metoder för att detektera bildningen av hydroxylradikaler såväl i laboratoriet som i tekniska miljöer. Det andra syftet med arbetet var att syntetisera immobiliserade TiO2 filmer med hög fotokatalytisk effektivitet med en sol-gel metod.</p><p>    Möjligheten att använda indigokarmin och ftalhydrazid som OH-radikalprob undersöktes. Det organiska färgämnet indigokarmin absorberar synligt ljus starkt vid 610 nm vilket gör att dess nedbrytning lätt kan följas i en spektrofotometer. Resultaten av gammaradiolys visade att båda ^•OH och HO₂^• kan bleka indigokarmin och att den blekning som härrör från ^•OH var oberoende av pH. Fotokatalytisk blekning av indigokarmin med blacklight UV bestrålning av  Degussa P25 TiO2 suspensioner undersöktes sedan. Ett starkt pH-beroende av blekningsutbytet erhölls vilket tolkas som att kvantutbytet av OH-radikaler vid pH 3 är en fjärdedel jämfört med det vid pH 10.</p><p>    När ftalhydrazid reagerar med OH-radikaler bildas starkt kemiluminiscent 3-hydroxy-ftalhydrazid. Med denna  specifika OH-radikalprob, erhölls ett ännu starkare pH beroende. Vid pH 10 var kvantutbytet i paritet med det som erhölls med indigokarmin, medan kvantutbytet vid lågt pH var nära noll. Tillsats av fosfat-  och fluoridjoner visade sig avsevärt öka OH-radikalutbytet vid lågt pH-värde genom att blockera adsorption av ftalhydrazid på TiO2 ytorna. Adsorptionen av ftalhydrazid på TiO2 är således en viktig faktor när denna metod används.</p><p>    Fotokatalytiskt verksamma TiO2-filmer på metallplattor framställdes med sol-gel metoden med titan-isopropoxide som TiO2-prekursor och isopropanol som lösningsmedel. Den fotokatalytiska aktiviteten av TiO2-belagda plattor utvärderades genom blekning av indigokarmin vid pH 9 under blacklight UV-bestrålning. Effekten av olika proportioner mellan isopropanol, vatten och saltsyra till titan isopropoxide undersöktes. Det visade sig att denfotokatalytiska aktiviteten av TiO2-plattorna i hög grad påverkades av kalcineringstemperatur, beläggningscykler och materialet i plattorna.</p>

<p>Thin films of cobalt oxide, iron oxide and niobium oxide, and nanostructured thin films of iron oxide, titanium oxide and multilayered iron oxide/titanium oxide have been deposited by Atomic Layer Deposition (ALD). The metal oxides were grown using the precursor combinations CoI2/O2, Fe(Cp)2/O2, NbI5/O2 and TiI4/H2O. The samples were analysed primarily with respect to phase content, morphology and growth characteristics.</p><p>Thin films deposited on Si (100) were found to be amorphous or polycrystalline, depending on deposition temperature and the oxide deposited; cobalt oxide was also deposited on MgO (100), where it was found to grow epitaxially with orientation (001)[100]Co3O4||(001)[100]MgO. As expected, the polycrystalline films were rougher than the amorphous or the epitaxial films. The deposition processes showed properties characteristic of self-limiting ALD growth; all processes were found to have a deposition temperature independent growth region. The deposited films contained zero or only small amounts of precursor residues.</p><p>The nanostructured films were grown using anodic aluminium oxide (AAO) or carbon nanosheets as templates. Nanotubes could be manufactured by depositing a thin film which covers the pore walls of the AAO template uniformly; free-standing nanotubes retaining the structure of the template could be fabricated by removing the template. Multilayered nanotubes could be obtained by depositing multiple layers of titanium dioxide and iron oxide in the pores of the AAO template. Carbon nanosheets were used to make titanium dioxide nanosheets with a conducting graphite backbone. The nucleation of the deposited titanium dioxide could be controlled by acid treatment of the carbon nanosheets.</p>

<p>Homogeneous palladium-catalyzed Heck vinylation of aryl chlorides was investigated under air using Herrmann’s palladacycle and the P(<i>t</i>-Bu)₃-liberating salt [(<i>t</i>-Bu)₃PH]BF₄. Based on the results, controlled microwave heating was utilized to accelerate model Heck reactions with aryl chlorides down to 30 min employing an electron-poor olefin and a mixture of an ionic liquid and 1,4-dioxane as solvent.</p><p>For the first time, a highly regioselective general protocol has been developed for palladium-catalyzed terminal (β-) arylation of acyclic vinyl ethers using inexpensive aryl chlorides as starting materials and the preligand [(<i>t</i>-Bu)₃PH]BF₄ as the key additive. This swift and straightforward protocol exploits non-inert conditions and controlled microwave heating to reduce handling and processing times, and aqueous DMF or environmentally friendly PEG-200 as the reaction medium. Somewhat higher selectivity for the linear β-product was observed in PEG-200. DFT calculations were performed at the B3LYP level of theory for the regioselectivity-determining insertion step in the Heck reaction following the neutral pathway. A series of <i>para</i>-substituted phenylpalladium(II) complexes was investigated in the computational study. The calculations support a ligand-driven selectivity rationale, where the electronic and steric influence of the bulky P(<i>t</i>-Bu)₃ ligand provides improved β-selectivity. The preparative methodology was used to synthesize the β-adrenergic blocking agent Betaxolol.</p><p>Highly stereoselective Pd(0)-catalyzed β-arylation and β-vinylation of a tetra-substituted cyclopentenyl ether have been accomplished using a chiral, pyrrolidine-based and substrate-bound palladium(II)-directing group under neutral reaction conditions. To the best of the author’s knowledge, this P(<i>t</i>-Bu)₃-mediated method represents the first examples of the successful utilization of aryl and vinyl chlorides in asymmetric Heck reactions. The Heck arylation products formed were hydrolyzed and isolated as the corresponding quaternary 2-aryl-2-methyl cyclopentanones in good to moderate two-step yields with excellent stereoselectivity (90-96% ee). Inclusion of vinyl triflates under neutral reaction conditions and one aryl triflate equipped with a strongly electron-withdrawing <i>para</i>-cyano substituent under cationic conditions increased the preparative usefulness of the methodology.</p><p>Furthermore, diastereoselective Heck arylation of both five- and six-membered cyclic vinyl ethers with aryl bromides, using the identical chiral auxiliary and suitable Pd sources, was performed. Arylated products from the tetra-substituted cyclopentenyl ether were also in this case hydrolyzed to the corresponding 2-aryl-2-methyl cyclopentanones with high to excellent enantioselectivity (85-94% ee). Despite low reaction rates and relatively modest yields, arylation reactions with the tri-substituted cyclohexenyl ether were found to be highly diastereoselective (94-98% de).</p><p>Thus, an attractive supplement to direct Pd(0)-catalyzed α-arylation protocols, particularly when the use of organic chlorides, aryl bromides, and milder reaction conditions are of great importance, have been developed.</p>

<p>Analysis of M-components is an important part of the diagnosis of monoclonal gammopathies and for the evaluation of disease response during treatment. In this project, two widely used electrophoresis methods and their corresponding immunotyping method were compared to evaluate the sensitivity of each method for the detection of small M-components. The project included 30 plasma samples from patients with identified M-components; 10 samples containing each IgG, IgA and IgM, respectively. All samples were diluted with normal EDTA plasma to achieve M-components of 5,00g/L. The samples were then serially diluted to achieve M-component concentrations of; 5,00, 2,50, 1,25, 0,63, 0,31 and 0,16g/L. All 180 samples were analysed with agarose gel electrophoresis and capillary electrophoresis. The dilutions above and below the detection level of each method were then analysed with immunofixation and immunosubtraction. The results showed good agreement between agarose gel electrophoresis and capillary electrophoresis in the highest concentrations of IgG and IgM. With agarose gel electrophoresis, IgA was detected in the same location as transferrin and the lowest concentration detected were therefore 1,25g/L. Besides the samples containing IgG, immunofixation was the most sensitive method.</p>

<p>Haematology instruments using optical and fluorescence techniques have improved the platelet count in domestic animals. There are still some difficulties present, especially when counting cat thrombocytes due to their ability to aggregate and the occurrence of large platelets.</p><p>The objective of this study was to evaluate and compare the platelet count, mean platelet volume and platelet crit in dogs, horses and cats on Advia 2120 and Sysmex XT-2000iV.</p><p>Fresh blood samples from 64 dogs, 40 horses and 39 cats with various medical conditions were analysed on both instruments. Manual blood smears of all feline samples were scrutiniously analysed to evaluate the aggregation warning flag from Advia.</p><p>There was good agreement between the instruments for the optical platelet count in dogs and cats. Slightly higher values were reported from Advia. Samples from horses presented poor correlations for all studied parameters. Platelet clumps appeared in 70% of the 37 scrutinized feline blood smears, while 46% of the samples generated aggregation warning flags from the Advia instrument.</p><p>Advia and Sysmex showed good agreement for platelet counts in blood from dogs and cats. Mean platelet volume and platelet crit need further evaluation before conclusions can be made concerning their clinical relevance. The sensitivity of the platelet aggregation warning flag from the Advia instument needs further elevation.</p>

<p>Individual proteins, and small collections of proteins, have been extensively studied for at least two hundred years. Today, more than 350 genomes have been completely sequenced and the proteomes of these genomes have been at least partially mapped. The inventory of protein coding genes is the first step toward understanding the cellular machinery. Recent studies have generated a comprehensive data set for the physical interactions between the proteins of <i>Saccharomyces cerevisiae</i>, in addition to some less extensive proteome interaction maps of higher eukaryotes. Hence, it is now becoming feasible to investigate important questions regarding the evolution of protein-protein networks. For instance, what is the evolutionary relationship between proteins that interact, directly or indirectly? Do interacting proteins co-evolve? Are they often derived from each other? In order to perform such proteome-wide investigations, a top-down view is necessary. This is provided by network (or graph) theory.</p><p>The proteins of the cell may be viewed as a community of individual molecules which together form a society of proteins (nodes), a network, where the proteins have various kinds of relationships (edges) to each other. There are several different types of protein networks, for instance the two networks studied here, namely metabolic networks and protein-protein interaction networks. The metabolic network is a representation of metabolism, which is defined as the sum of the reactions that take place inside the cell. These reactions often occur through the catalytic activity of enzymes, representing the nodes, connected to each other through substrate/product edges. The indirect interactions of metabolic enzymes are clearly different in nature from the direct physical interactions, which are fundamental to most biological processes, which constitute the edges in protein-protein interaction networks.</p><p>This thesis describes three investigations into the evolution of metabolic and protein-protein interaction networks. We present a comparative study of the importance of retrograde evolution, the scenario that pathways assemble backward compared to the direction of the pathway, and patchwork evolution, where enzymes evolve from a broad to narrow substrate specificity. Shifting focus toward network topology, a suggested mechanism for the evolution of biological networks, preferential attachment, is investigated in the context of metabolism. Early in the investigation of biological networks it seemed clear that the networks often display a particular, 'scale-free', topology. This topology is characterized by many nodes with few interaction partners and a few nodes (hubs) with a large number of interaction partners. While the second paper describes the evidence for preferential attachment in metabolic networks, the final paper describes the characteristics of the hubs in the physical interaction network of <i>S. cerevisiae</i>.</p>

<p>This thesis deals with the impact of hydrogen bonding on the properties of phenols. The possibility for tyrosine to form hydrogen bonds to other amino acids has been found to be important for its function as an electron transfer mediator in a number of important redox enzymes. This study has focused on modeling the function of tyrosine in Photosystem II, a crucial enzyme in the photosynthetic pathway of green plants.</p><p>Hydrogen bonds between phenol and amines in both inter- and intramolecular systems have been studied with quantum chemical calculations and also in some solid-state structures involving phenol and imidazole.</p><p>Different phenols linked to amines have been synthesized and their possibilities of forming intra- and intermolecular hydrogen bonds have been studied as well as the thermodynamics and kinetics of the generation of phenoxyl radicals via oxidation reactions.</p><p>Since carboxylates may in principle act as hydrogen bond acceptors in a manner similar to imidazole, proton coupled electron transfer has also been studied for a few phenols intramolecularly hydrogen bonded to carboxylates with the aim to elucidate the mechanism for oxidation. Electron transfer in a new linked phenol—ruthenium(II)trisbipyridine complex was studied as well.</p><p>The knowledge is important for the ultimate goal of the project, which is to transform solar energy into a fuel by an artificial mimic of the natural photosynthetic apparatus</p>

<p>This thesis deals with the copper-catalyzed substitution of allylic substrates.</p><p>In the first part of this thesis, the synthesis of a series of metallocenethiolates is described. The thiolates were examined as ligands in the enantioselective copper(I)-catalyzed γ-substitution of allylic acetates.</p><p>The second part describes a study on copper-catalyzed α-substitution of enantiomerically pure secondary allylic esters. It was observed that the degree of chirality transfer is strongly dependent on the reaction temperature. The loss of chiral information is consistent with an equilibration of the allylCu(III) intermediates prior to product formation, which is essential in order to realize a copper-catalyzed dynamic kinetic asymmetric transformation process.</p><p>The third part describes a study on copper-catalyzed stereoselective α-substitution of enantiopure acyclic allylic esters. This method, when combined, with ruthenium and enzyme catalyzed dynamic kinetic resolution of allylic alcohols, provides a straightforward route to pharmaceutically important α-methyl carboxylic acids.</p><p>The fourth part is a mechanistic study on the reaction of perfluoroallyl iodide with organocuprates. Experimental studies as well as theoretical calculations were used to explain the contrasting reactivity of perfluoroallyl iodide vs. allyl iodide in cuprate allylation reactions.</p><p>In the fifth part, the development of a practical and useful method for the preparation of pentasubstituted acylferrocenes is presented.</p>

<p>A whisker is a common name of single crystalline inorganic fibre of small dimensions, typically 0.5-1 μm in diameter and 20-50 μm in length. Whiskers are mainly used as reinforcement of ceramics. This work describes the synthesis and characterisation of new whisker types. Ti0.33Ta0.33Nb0.33CxN1-x, TiB2, B4C, and LaxCe1-xB6 have been prepared by carbothermal vapour–liquid–solid (CTR-VLS) growth mechanisms in the temperature range 900-1800°C, in argon or nitrogen. Generally, carbon and different suitable oxides were used as whisker precursors. The oxides reacted via a carbothermal reduction process. A halogenide salt was added to form gaseous metal halogenides or oxohalogenides and small amount of a transition metal was added to catalyse the whisker growth. In this mechanism, the whisker constituents are dissolved into the catalyst, in liquid phase, which becomes supersaturated. Then a whisker could nucleate and grow out under continuous feed of constituents. </p><p>The syntheses of TiC, TiB2, and B4C were followed at ordinary synthesis conditions by means of mass spectrometry (MS), thermogravimetry (TG), differential thermal analysis (DTA) and quenching. The main reaction starting temperatures and reaction time for the different mixtures was revealed, and it was found that the temperature inside the crucible during the reactions was up to 100°C below the furnace set-point, due to endothermic nature of the reactions. Quench experiments showed that whiskers were formed already when reaching the temperature plateau, but the yield increased fast with the holding time and reached a maximum after about 20-30 minutes. Growth models for whisker formation have been proposed.</p><p>Alumina based composites reinforced by (2-5 vol.%) TiCnano and TiNnano and 25 vol.% of carbide, and boride phases (whiskers and particulates of TiC, TiN, TaC, NbC, (Ti,Ta)C, (Ti,Ta,Nb)C, SiC, TiB2 and B4C) have been prepared by a developed aqueous colloidal processing route followed by hot pressing for 90 min at 1700°C, 28 MPa or SPS sintering for 5 minutes at 1200-1600°C and 75 MPa. Vickers indentation measurements showed that the lowest possible sintering temperature is to prefer from mechanical properties point of view. In the TiNnano composites the fracture mode was typically intergranular, while it was transgranular in the SiCnano composites. The whisker and particulate composites have been compared in terms of e.g. microstructure and mechanical properties. Generally, additions of whiskers yielded higher fracture toughness compared to particulates. Composites of commercially available SiC whiskers showed best mechanical properties with a low spread but all the other whisker phases, especially TiB2, exhibited a great potential as reinforcement materials. </p>

<p>Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulating of sintering kinetics and therefore makes it possible to obtain Si₃N₄-based ceramics with tailored microstructures, consisting of grains with either equiaxed or elongated morphology.</p><p> The presence of an extra liquid phase is necessary for forming tough interlocking microstructures in Yb/Y-stabilised α-sialon by HP. The liquid is introduced by a new method, namely by increasing the O/N ratio in the general formula RE_xSi_12-(3x+n)Al_3x+nO_nN_16-n while keeping the cation ratios of RE, Si and Al constant. </p><p>Monophasic α-sialon ceramics with tailored microstructures, consisting of either fine equiaxed or elongated grains, have been obtained by using SPS, whether or not such an extra liquid phase is involved. The three processes, namely densification, phase transformation and grain growth, which usually occur simultaneously during conventional HP consolidation of Si₃N₄-based ceramics, have been precisely followed and separately investigated in the SPS process.</p><p>The enhanced densification is attributed to the non-equilibrium nature of the liquid phase formed during heating. The dominating mechanism during densification is the enhanced grain boundary sliding accompanied by diffusion- and/or reaction-controlled processes. The rapid grain growth is ascribed to a <i>dynamic ripening</i> mechanism based on the formation of a liquid phase that is grossly out of equilibrium, which in turn generates an extra chemical driving force for mass transfer. Monophasic α-sialon ceramics with interlocking microstructures exhibit improved damage tolerance. Y/Yb- stabilised monophasic α-sialon ceramics containing approximately 3 vol% liquid with refined interlocking microstructures have excellent thermal-shock resistance, comparable to the best β-sialon ceramics with 20 vol% additional liquid phase prepared by HP. </p><p>The obtained sialon ceramics with fine-grained microstructure show formidably improved <i>superplasticity</i> in the presence of an electric field. The compressive strain rate reaches the order of 10^-2 s^-1 at temperatures above 1500oC, that is, two orders of magnitude higher than that has been realised so far by any other conventional approaches. The high deformation rate recorded in this work opens up possibilities for making ceramic components with complex shapes through super-plastic forming. </p>