The master thesis is dealing with the constructure of a house with nursing care. It’s four floor cellarless building with flat roof. The strucutural system is a wall system of brick blogs. Ceilings are solved as reinforced concrete floating slab with circuit reinforcing beam.

Diploma thesis deals with constructional design of an experimental fixed-bed reactor for biomass combustion research. This device is designed to facilitate good control of the combustion process and collection of quality data, particularly temperature, pressure, gas composition and mass loss. Obtained data is for creating mathematical models of combustion of solid biomass in the fixed-bed.

This work contains a proposal for constructions and workings of a worm mixer of clay, lime, cementand fly ash with water for delivery quantity 18 tons per an hour. The introduction describes problems of mixing and mixers in the preparation of building materials. I have mentioned calculation of the main proportions and drive under the relevant norms and self-fortress control of the stresssed parts of mixer. Drawing documentation is worked into the ACad program and contains the configurations of the proposed machinery and detailed subassembly of important parts of worm mixer.

This thesis is focused on the design of conveyor of couplers with regard to the requirements for the resolution, and consisting of several parts. The first part outlines the given issue, short research study and an idea of solution. The next part concentrates on the structural design of the whole conveyor. Then the description of the first part of the conveyor including the structural design and the required calculations follow. Finally, other conveyor parts, the budget and the instruction manual are explained. The thesis includes the related drawings and all necessary calculations for other conveyors parts as well.

The main target of this diploma thesis was to make suggestion orientation and movement product, this solution describe, make calculation and draw drawings documentation.

The aim is to develop new adjusting element. There were three versions of engineering design suggested, which were consequently simulated for various materials. Optimal material was chosen and came up to production suggested variants. These variants were consequently implemented to the headlamp and were consequently measured and tested. During measuring was under consideration change of CutOff line position after heat imunity and vibration tests. Result is selection only one material and only one engineering design of adjusting element solution, which warrants easy and fast assembly and confidential adjusting of reflector, for standardization and implementation to recently develop headlamps.

Purpose of this thesis is to introduce reader to 3D parametric construction tools and their application with dynamic geometry. Project introduces basic concepts of parametric construction in computer geometry, summary of the state of the art, description of selected parametric geometry software, evaluation of its features and design of 3D parametric geometry library for use in computer graphics followed by implementation of said library and user interface application for evaluation.

The main aim of the PhD thesis is to determine the influence of moisture on the me-chanical properties of furniture construction joints. The influence of moisture was examined in two groups of joints: glued joints along the length and corner joints with glued and mecha-nical fasteners. In both groups of tested joints, the joints were made of DTD, plastic and a combi-nation of these materials. Construction joints are tested for two environments with ap-propriate weather conditions, that the interiors of residential and public buildings - an envi-ronment with conditions t = 23 ± 2° C, WR = 45 ± 5 % and humid environment with condi-tions t = 23 ± 2° C, WR = 90 % (bathrooms, laundry rooms, swimming pools). Two types of mate-rials were selected, which were examined separately as well in their mutual combination. In the case of joints glued along the length, the load carring capcity of glued joint was determi-ned with two types of adhesives: epoxy and polyurethane. The highest values of strength were achieved with a material combination of plastic - plastic and a humidity of 45 % and 90 % using the PUR adhesive. The influence of moisture on the stiffness and the load carrying capacity of the joints was examined in the corner joints. In the case of corner joints, the influence of moisture on the mechanical properties was not confirmed , the decisive factor is influence of the bonded materials and the position of the fasteners.

At first this diploma thesis tests and compared selected physical and mechanical properties of various construction materials. Furthermore, thesis compares results with measured values determined by manufacturer. In next part of thesis is de-signed similar wall composition which is differs only by sheeting material. On every wall composition was calculated heat transmittance. Compositions are compared with each other, further there are compared economically.

Diploma thesis focuses on design of low energy timber house. House design consists of design documentation for building permission, including engineering report. Structural system is designed and structural assessment of selected elements is made. Design contains solutions of structural compositions and structures of envelope are thermally evaluated in relation to heat insulation requirements.