The aim of the project was to design a library with a gallery in the cadastral area of Nový Jičín – Horní předměstí of Bohuslava Martinů street. The main idea was to create a comfortable backdrop for students as well as the possibility of cultural education in the form of various exhibitions. The plan will be implemented according to the investor's requirements and will be in line with the land-use plan. This is a basement new building of the library with 2 above-ground floors. This large new building is in the shape of an irregular U. The building is based on a base plate. A combined wall and column construction system is used. The object is designed with a rasterized front lightweight perimeter casing with a front web-shaped facade

The thesis deals with the design of automated testing equipment of selected types of pneumatic valves. The problem of manual control process is its inefficiency, both in terms of human error rate and time loss caused by further assembly. The automated manual inspection process eliminates the problem. In the theoretical part, the types of switchgear are described, selected measuring procedures and methods of measurement are described. In the practical part, the measuring procedure was set out and on the basis of it there were designed variants of the testing machine and test circuit. The conclusion of the thesis contains evaluation of the whole project.

This diploma thesis deals with the design of test equipment for selected types of pneumatic cylinders. In the first, theoretical, part of the work is an analysis of the current state of knowledge in the field of pneumatic cylinders. Furthermore, the problems in the field of measurement and testing of pneumatic components are described here, selected linear position sensors are also described herein too. The second, practical, part deals with the choice of a suitable design variant and the actual solution of the test equipment design. A pneumatic circuit is also designed here. Part of the work is a 3D model of the test equipment and drawing documentation. The conclusion of the work is devoted to the overall evaluation of the work and recommendations for practice.

This work designs overall structural design of technological manipulator of smoking- chamber, which serves to move the trolleys with food between smoking and chilling chamber. Chambers are connected in a single device. Trolleys are considered with full and uniformly distributed load. Work includes a 3D model of equipment and production documentation.

The construction of swirl turbine with counter-rotating runners. Master's thesis of master's studies of 2th years. This master's thesis is a technical report. The content of this technical report is engineering design of turbine, strength calculation of designed parts, design of bearings and development drawings for production.

This thesis deals with the construction proposal of the combustion chamber of Stirling engine. The introduction briefly describes the history and practical application of Stirlinova engine today. The following section explains the differences between theoretical and real cycle and the principle of beta Stirling engine modifications. The next section is devoted to the calculation of fuel and air consumption and fuel compared to each other. The proposed design is based not only on the calculation of fuel and air, but also heat transfer between flue gas and preheated air. The last part is devoted to calculating the flow of LPG and flow model of the combustion chamber.

Tato diplomová práce je věnována vývoji a analýze zavěšení Formule Student. V úvodu je představena mezinárodní soutěž Formula Student, její disciplíny a historie týmu TU Brno Racing a UH Racing. V teoretické části je detailní popis charakteristik pneumatiky, kinematický návrh zavěšení a aerodynamiky s ohledem na závodní vozy. V části věnované konstrukčnímu návrh je popis vývoje ramen zavěšení, vahadel a zadního stabilizátoru. Návrh kinematických charakteristik vozu Dragon 5 je detailně popsán a porovnán s předešlou variantou. Mimo vývoje kinematiky Dragon 5 je popsán vývoj vozu UH 18. Závěrečná kapitola detailně analyzuje zaznamenaná data z testování vozu Dragon 4.

The basic aim of this diploma thesis is to prepare project documentation for construction management for the new residential building in Prague. The building is designed in a combined monolithic reinforced concrete and brick support system. The building consists of three above (3.NP partial) and one underground floor. The mass of the building is designed as a single integrated unit. Plan of the building is rectangular. The thesis includes documnetation in the range of requirements for building management, assessment in terms of building physics building and fire safety of the building.

This diploma thesis deals with design of low-emission combustion chamber, which burns natural gas. The type of the combustion chamber is CAN with six combustion chambers with parallel flow and mixer. A swirler is used like stabilizer. The first part of the thesis describes combustion chambers. Next part is about calculation of circuit of combustion turbine, where combustion chamber is, distribution of air flow and design of main dimensions of combustion chamber. Technical documentation and tables of coefficients are in the attachment.

The current state of earth building in Czeh Republic is described in this work. The results are based on a research made in several villages. Reconstruction of traditional countryside building made from unburned earth should be made very sensitive with respect to architectural and technical solution and in accordance with environmental requirements and wishes of investor.