No description available.

Accumulation or aggregation of amyloidogenic proteins in the brain plays a central role in neurodegenerative diseases. The most common and highly growing form of dementia in the elderly population is Alzheimer's disease (AD) followed by Parkinson's disease (PD). The major proteins associated are amyloid beta (Abeta) and alpha-synuclein (alpha-syn) in AD and PD, respectively. These proteins are released or found near the neuronal membranes in the brain. Consequently to understand the behavior of the proteins using a model membrane system becomes an important facet of understanding these diseases. Langmuir monolayer approach was used to study the surface chemistry and spectroscopy of Abeta (1-40), Abeta(1-42) and alpha-synuclein. Moreover, surface chemistry of a model protein namely, lysozyme was investigated. In recent times, quantum dots (QDs) are considered as potential probes for bio-imaging. These particles can be beneficial when it comes to the investigation of neurodegenerative diseases. The effect of nanoparticles, i.e., CdSe/ZnS QDs on Abeta (1-42) morphology was investigated. Nevertheless, it was observed that the capping ligand plays a significant role in the surface chemistry of QDs when mixed with or conjugated to Abeta (1-42). Surface pressure- and surface potential-area isotherms were used to characterize the lysozyme Langmuir monolayer. The compression-decompression cycles and stability measurements showed a homogeneous and stable monolayer at the air-water interface. Salt concentration in the subphase and pH of the subphase were parameters controlling homogeneity and stability of the Langmuir monolayer. In situ UV-vis and fluorescence spectroscopies were used to verify the homogeneity of the lysozyme monolayer, and to identify the chromophore residues in the lysozyme. Optimal experimental conditions were determined to prepare a homogeneous and stable lysozyme Langmuir monolayer. The surface chemistry and spectroscopy of the reduced lysozyme Langmuir monolayer were investigated at different pH values and were compared to a native lysozyme. It was established that the limiting molecular area of the reduced lysozyme was not subphase pH dependent as was found for the native one. To explain this result in terms of the conformation and orientation of the lysozyme Langmuir monolayer at various subphase pH values, we have used Infrared Reflection Absorption Spectroscopy (IRRAS). The interpretation of the results suggests a change in the conformation and orientation of the native lysozyme Langmuir monolayer with the subphase pH 3, 6 and 11. The surface chemistry of Abeta (1-40) and its interaction with the lipid raft Langmuir monolayer were examined where the stability of the lipid raft Langmuir monolayer came out as an essential parameter. Lipid raft Langmuir monolayer in the presence or absence of ganglioside GM1 having POPC as one of the phospholipids was found to be very unstable and collapsed within 26 min. Whereas, the phospholipid DPPG improved the stability of the monolayer significantly when cholesterol was used in excess. We have examined the surface and spectroscopic properties of Abeta (1-42) mixed with or conjugated to dihydrolipoic acid (DHLA)- and polyethylene glycol (PEG)- capped CdSe/ZnS QDs. Surface pressure-area isotherms, in situ UV-vis absorption, and fluorescence spectroscopy were used to characterize the Abeta (1-42) mixed with or conjugated to QDs at the air-water interface. The capping of QDs played a role in surface chemistry as was determined by surface pressure-area isotherms and spectroscopic properties of the Langmuir monolayer. Furthermore Abeta(1-42) was bioconjugated to DHLA-capped CdSe/ZnS QDs. Upon conjugation of Abeta (1-42) to DHLA-capped QDs, the sample was incubated at 37oC, the process of fibrillation was inhibited as compared with a sample where Abeta (1-42) was simply mixed with the QDs. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) were employed for the analysis of the samples. The morphology of fibrils and reduction in number of fibrils was substantial in the case of Abeta(1-42) conjugated to QDs. Reduction in fibrillation was also confirmed using a Thioflavin T assay. Moreover, quenching of tyrosine signal was observed in presence of the QDs, which indicates an interaction of QDs to the tyrosine residue in Abeta (1-42). The Surface chemistry and spectroscopy of alpha-syn, which is a natively unstructured protein important in the neuropathology of PD was investigated. IRRAS was utilized to investigate its conformation, alpha-syn was found to form a Langmuir monolayer in alpha-helical conformation with its helical axis parallel to the air-water interface.

The aim of this work has been to make use of surface scattering techniques to study soft matter at interfaces. The work presented herein is composed of two distinct bodies of work. The first comprises a fundamental study of the physical and structural properties of Langmuir monolayers composed of sulfobetaine surfactants. Physiochemical properties of the films have been investigated through the use of Langmuir trough techniques. This has been used to support x-ray and neutron reflectometry data, from which structural parameters were derived. The second body of work involves attempts to find and/or characterize novel ways of aligning proteins at interfaces. Soluble proteins at lipid interfaces have been characterized in terms of their interactions with functionalized lipid monolayers. Specific interactions have been utilized to adsorb protein layers at the interface through interactions with His-tag chelating lipids within the monolayer. These have been characterized using neutron reflectometry and quartz crystal microbalance studies. Work has also been completed to design a suitable system for the adsorption of membrane proteins. This has involved aligning phospholipid bilayer nanodiscs at the lipid interface and subsequent characterization through neutron reflectometry.

Films of phospholipids and biologically relevant surfactants at the air-water interface provide a well-defined medium to study molecular alignment, phase behavior and interactions of biomembranes and lung surfactant with exogenous materials. Interactions between lung surfactant interfaces and solid particles are of particular interest due to the increased use of nanomaterials in industrial applications and the promise of polymeric particles in pulmonary drug delivery. Understanding such interactions is necessary to avoid potential adverse effects on surfactant function after exposure to particles. In this thesis, the mechanisms of surfactant inhibition after exposure to submicron particles via different routes were investigated. The effects of carboxyl-modified polystyrene particles (200 nm) on films of dipalmitoyl phosphatidylcholine (DPPC) and Infasurf (calf lung surfactant extract) were studied. Surfactants were exposed to different concentrations of particles in a Langmuir trough with symmetric surface compression and expansion. Surface tension, potential, microstructure and topology were examined to monitor particle effects on surfactant function. Several methods of surfactant exposure to particles were studied: particle injection into the subphase after spreading surfactant monolayers (subphase injection), mixing the particles with the subphase and spreading the surfactant on top (monolayer addition) and particle aerosolization onto surfactant films. Studies with DPPC monolayers revealed that particle-surfactant interactions are dependent on the particle introduction method. In the subphase injection method, particles did not penetrate the monolayer and no inhibitory effects on surfactant function were observed. However, in the monolayer addition method, particles caused a premature monolayer collapse and hindered surfactant respreading likely by penetrating into the DPPC monolayer. Finally, particle aerosolization on surfactant was performed to mimic the physiologically relevant route of surfactant exposure to particles. Particle aerosolization on DPPC monolayers significantly inhibited surfactant function in the lung-relevant surface tension range. When aerosolized on Infasurf, particles caused inhibitory effects as a function of time suggesting adsorption of surfactant components on particle surfaces as the main mechanism of interaction. This research will enhance understanding of the mechanisms of particle-induced surfactant dysfunction, thereby providing information for the safe design of polymeric particles for drug delivery and for developing guidelines for particles used in occupational settings.

Amino acid phenylalanine plays a key role in numerous biological processes and is also involved in amyloid fibril diseases. The aim of the thesis is to deepen our understanding of its behavior and partitioning at interfaces, and to investigate its clustering. Classical atomistic molecular dynamics simulations were performed for phenylalanine and three other aromatic molecules which chemical structure is derived from it - phenylglycine, phenylacetic acid and tyrosine. Molecules are simulated at both water-air and at water-DPPC-air interfaces. Phenylalanine, phenylglycine and phenylacetic acid demonstrate surface activity at the water-air interface, whereas tyrosine is not surface active. All molecules interact with the lipid monolayer at the water-DPPC-air interface but only phenylalanine penetrates deep into the monolayer. Formation of transient clusters is observed in the interfacial regions, mostly for phenylalanine. Powered by TCPDF (www.tcpdf.org)

Surface behavior of poly (epsilon-caprolactone) (PCL) have been studied at the air/water interface (A/W). PCL is a hydrophobic and crystalline polyester with a glass transition temperature around -60 degrees centigrade, a melting point around 55 degrees centigrade, excellent biocompatibility, and low toxicity. In the past decade, PCL based systems have attracted considerable interest for controlled-release drug delivery and as scaffolds for tissue engineering, that require a fundamental understanding of PCL's degradation mechanisms and crystallization properties. PCL spherulites were commonly observed in previous bulk studies. This thesis focuses on PCL crystallization in Langmuir monolayers. Brewster angle microscopy (BAM) studies show that square, distorted rectangular, and dendritic crystals form at the A/W interface. While dendritic structures have been observed in poly (ethylene oxide) (PEO) thin film on solid substrates, this study of PCL is the first time that dendritic morphologies have been observed at the A/W interface for a linear flexible-coil polymer. As far as we know, the crystallization of flexible-coil polymers at the A/W interface is a brand new area of research. These findings may provide an interesting model system for studying crystallization in confined geometries and the effect of crystallinity on enzyme catalyzed hydrolysis of this important biodegradable polymer at the A/W interface. The main objectives of this thesis were to investigate the phase behavior of PCL at the A/W interface, gain a deeper understanding of the nucleation and growth mechanism of PCL crystallization at the A/W interface through surface pressure-area isotherms and isobaric area relaxation analyses, and interpret the effects of molecular weight on the nucleation and growth mechanism, and morphologies of semicrystalline PCL crystallized in Langmuir monolayers at the A/W interface. / Master of Science

<p>In the research presented in this licentiate thesis the surface specific technique Vibrational Sum Frequency Spectroscopy, VSFS, combined with the Langmuir trough has been utilized to investigate Langmuir monolayers and Langmuir-Blodgett (LB) deposited mono- and bilayers of phospholipids. Their molecular structure, stability, and hydration were probed to gain additional understanding of important properties aiming at facilitating the use of such layers as model systems for biological membranes.</p><p>VSFS was applied to <em>in situ</em> studies of the degradation of Langmuir monolayers of 1,2-diacyl-phosphocholines with identical C-18 chains having various degrees of unsaturation. The time-dependent change of the monolayer area at constant surface pressure as well as the sum frequency intensity of the vinyl-CH stretch at the C=C double bonds were measured to monitor the degradation. It was shown that a rapid degradation of the monolayers of unsaturated phospholipids occurred when exposed to the laboratory air compared to the fully saturated lipid, and that the degradation could be inhibited by purging the ambient air with nitrogen. The degradation was attributed to oxidation mediated by reactive species in the air.</p><p>The molecular structure and order of Langmuir monolayers of 1,2-distearoyl-phosphocholine (18:0 PC) and their hydrating water were investigated at different surface pressures using VSFS. The spectroscopic data indicated a well ordered monolayer at all surface pressures with a more intense signal at higher pressures attributed to the subsequent increase of the number density and more ordered lipid molecules due to the tighter packing. Water molecules hydrating the headgroups or being in contact with the hydrophobic parts were observed and distinguished by their vibrational frequencies, and found to have different average orientations.</p><p>Additionally, monolayers of 18:0 PC, its fully deuterated analogue, and 1,2-distearoyl-phosphoserine (18:0 PS) were Langmuir-Blodgett (LB) deposited on CaF₂ substrates and VSFS was used to investigate the structure and order of the films as well as the hydrating water. The CH-region, water region, and lower wavenumber region containing phosphate, ester, carboxylic acid, and amine signals were probed to obtain a complete picture of the molecule. The data indicates that all deposited monolayers formed a well ordered and stable film and the average orientation of the aliphatic chains was determined using the antisymmetric methyl stretch.</p> / <p>I forskningen som presenteras i denna licentiatavhandling har den ytspecifika vibrationssumfrekvensspektroskopin, VSFS, använts tillsammans med Langmuirtråget för att studera Langmuir-monolager och Langmuir-Blod-gett (LB) deponerade monolager och bilager av fosfolipider. För att utvidga förståelsen av egenskaper som är viktiga för att underlätta användandet av dem som modellsystem för biologiska membran undersöktes såväl deras molekylära struktur som stabilitet och hydratisering.</p><p>VSFS användes för att genomföra <em>in situ</em>-studier av nedbrytningen av Langmuir-monolager av 1,2-diacyl-fosfokoliner med identiska 18 kolatomer långa sidokedjor med varierande antal omättade kol-kol-bindningar. För att övervaka nedbrytningen mättes såväl den tidsberoende förändringen av monolagernas area vid konstant yttryck som sumfrekevensintensiteten från dubbelbindningarnas CH-vibration. När monolagerna bestående av omättade fosfolipider utsattes för laboratorieluften bröts de ner hastigt jämfört med det helt mättade monolagret. Denna nedbrytning som sannolikt orsakades av reaktiva ämnen i luften kunde inhiberas fullständigt genom att ersätta den omgivande luften med kvävgas.</p><p>Den molekylära strukturen och ordningen hos Langmuir-monolager av 1,2-distearoyl-fosfokolin (18:0 PC) och deras hydratiseringsvatten undersöktes vid olika yttryck med VSFS. Den spektroskopiska datan visar att monolagerna är välordnade vid alla yttryck samt att sumfrekvenssignalens styrka ökar med ökande yttryck på grund av såväl det större antalet molekyler per ytenhet som den högre ordningen då molekylerna packas tätare. Vattenmolekyler som hydratiserar huvudgrupperna eller är i kontakt med hydrofoba delar och har olika medelorientering observerades och kunde identifieras genom sina vibrationsfrekvenser.</p><p>Vidare deponerades monolager av 18:0 PC, dess fullt deuterade analog och 1,2-distearoyl-fofsfoserin (18:0 PS) på substrat av CaF₂ och VSFS användes för att undersöka filmernas struktur och ordning såväl som hydratiseringsvattnet. CH- och vattenregionerna samt lågvågtalsområdet som innehåller fosfat-, ester-, karboxylsyra- och aminsignaler undersöktes för att få en fullständig bild av den molekylära strukturen. Data visar att alla deponerade monolager bildade en välordnad och stabil film och kolvätekedjornas medelorientering bestämdes med hjälp av signalen från den antisymmetriska metylvibrationen.</p> / QC 20100924

Es werden die Strukturbildung und Benetzung zweidimensionaler (2D) Phasen von Langmuir-Monolagen im lokalen thermodynamischen Gleichgewicht untersucht. Eine Langmuir-Monolage ist ein isoliertes 2D System von Surfaktanten an der Wasser/Luft-Grenzfläche, in dem kristalline, flüssigkristalline, flüssige oder gasförmige Phasen auftreten, die sich in Positionsordnung und/oder Orientierungsordnung unterscheiden. Permanente elektrische Dipolmomente der Surfaktanten führen zu einer langreichweitigen repulsiven Selbstwechselwirkung der Monolage und zur Bildung mesoskopischer Strukturen. Es wird ein Wechselwirkungsmodell verwendet, das die Strukturbildung als Wechselspiel kurzreichweitiger Anziehung (nackte Linienspannung) und langreichweitiger Abstoßung (Oberflächenpotential) auf einer Skala Delta beschreibt. Physikalisch trennt Delta die beiden Längenskalen der lang- und kurzreichweitigen Wechselwirkung. In dieser Arbeit werden die thermodynamischen Stabilitätsbedingungen für die Form einer Phasengrenzlinie (Young-Laplace-Gleichung) und Dreiphasenkontaktpunkt (Young-Bedingung) hergeleitet und zur Beschreibung experimenteller Daten genutzt: Die Linienspannung benetzender 2D Tropfen wird mit Hilfe hängender-Tropfen-Tensiometrie gemessen. Die Blasenform und -größe von 2D Schäumen wird theoretisch modelliert und mit experimentellen 2D Schäumen verglichen. Kontaktwinkel werden durch die Anpassung von experimentellen Tropfen mit numerischen Lösungen der Young-Laplace-Gleichung auf Mikrometerskalen gemessen. Das Skalenverhalten des Kontaktwinkels ermöglicht die Bestimmung einer unteren Schranke von Delta. Weiterhin wird diskutiert, inwieweit das Schalten von 2D Benetzungsmodi in biologischen Membranen zur Steuerung der Reaktionskinetik ein Rolle spielen könnte. Hierzu werden Experimente aus unserer Gruppe, die in einer Langmuir-Monolage durchgeführt wurden, herangezogen. <br /> <br /> Abschließend wird die scheinbare Verletzung der Gibbs&prime;schen Phasenregel in Langmuir-Monolagen (nicht-horizontales Plateau der Oberflächendruck-Fläche Isotherme, ausgedehntes Dreiphasengebiet in Einkomponentensystemen) quantitativ untersucht. Eine Verschmutzung der verwendeten Substanzen ist demnach die wahscheinlichste Erklärung, während Finite-Size-Effekte oder der Einfluss der langreichweitigen Elektrostatik die Größenordnung des Effektes nicht beschreiben können. / The present work investigates the structure formation and wetting in two dimensional (2D) Langmuir monolayer phases in local thermodynamic equilibrium. A Langmuir monolayer is an isolated 2D system of surfactants at the air/water interface. It exhibits crystalline, liquid crystalline, liquid and gaseous phases differing in positional and/or orientational order. Permanent electric dipole moments of the surfactants lead to a long range repulsive interaction and to the formation of mesoscopic patterns. An interaction model is used describing the structure formation as a competition between short range attraction (bare line tension) and long range repulsion (surface potentials) on a scale Delta. Delta has the meaning of a dividing length between the short and long range interaction. In the present work the thermodynamic equilibrium conditions for the shape of two phase boundary lines (Young-Laplace equation) and three phase intersection points (Young&prime;s condition) are derived and applied to describe experimental data: The line tension is measured by pendant droplet tensiometry. The bubble shape and size of 2D foams is calculated numerically and compared to experimental foams. Contact angles are measured by fitting numerical solutions of the Young-Laplace equation on micron scale. The scaling behaviour of the contact angle allows to measure a lower limit for Delta. Further it is discussed, whether in biological membranes wetting transitions are a way in order to control reaction kinetics. Studies performed in our group are discussed with respect to this question in the framework of the above mentioned theory.<br /> <br /> Finally the apparent violation of Gibbs&prime; phase rule in Langmuir monolayers (non-horizontal plateau of the surface pressure/area-isotherm, extended three phase coexistence region in one component systems) is investigated quantitatively. It has been found that the most probable explanation are impurities within the system whereas finite size effects or the influence of the long range electrostatics can not explain the order of magnitude of the effect.

The Langmuir – Blodgett (LB) technique is about forming insoluble monolayer on the surface of aqueous solution and recently, it has emerged as one of the best method to study floating monolayer at the air – water interface. It has gained popularity after the use of monolayer with chemical complexes as well as biological species, and recently it has been used for the formation of biosensors. Langmuir monolayer arrays the amphiphilic molecules in a fashion where the hydrophobic part points towards the air and the hydrophilic group remains in contact with the aqueous subphase. Due to this property of Langmuir monolayer to orient the molecules at the air – water interface in a particular fashion, it can successfully serve as a template for two – dimensional reactions with restricted freedom. Hence, Langmuir monolayer has been extensively employed to study chemical and biological reactions at the air – water interface. To understand the behavior of Langmuir monolayer, surface pressure – molecular area (P – A) isotherms are studied as these P – A isotherms illustrate general conditions regarding the phase behavior of the two-dimensional Langmuir monolayer. Any change occurring due to the alignment of aliphatic molecules forming the monolayer is reflected by the change in P – A isotherms, which is known as phase transition. The phase transition is the most important element of the P – A isotherms with a characteristic signature of a plateau region in the isotherms. This phase transition point changes with the change of certain external parameters such as temperature, pH, and ionic strength, and as a result gives general information regarding the phase transition behavior. Therefore, with the little change of external parameters, the arrangement of the molecules in the monolayer also changes, which is reflected in the change in the nature of the isotherms. Thus, the system can, in principle, be used to define several physical parameters associated with it. On account of the property of Langmuir monolayer to orient the molecules at the air – water interface with restricted mobility and due to their condensed nature known as solid like phase, it closely mimics the situation inside a biological cell. Hence, we wanted to test whether an artificial nucleus can be generated at LB films. This can be achieved by immobilizing DNA or protein at the air – water interface and then by promoting their biological properties through macromolecular recognition. Here, immobilization of a macromolecule of biological relevance, its interaction with another component of a cell and extracting the thermodynamic parameters utilizing the LB technique will be of significance. This thesis embodies the immobilization of some biologically important proteins then follows their activity as well as DNA recognition properties at the air – water interface. A set of equations are derived here for the two dimensional Langmuir monolayer, which are used to calculate the thermodynamics of the system under study. Chapter 1 outlines the information about Langmuir monolayer and LB films. It sketches the historical background of the Langmuir monolayer and also elucidates the theory behind the same. This chapter cites the technical details of formation of Langmuir monolayer and LB films viś – a – viś other methods available for the fabrication of monomolecular films. It adequately discusses the functional LB films and their utilization for various different purposes. Finally, the role of metal ions in the LB films and in immobilizing biological macromolecules is discussed. Chapter 2 discusses the different techniques employed to perform the experiments described in this thesis. It includes the purification methods for the different proteins and DNA; the details of formation of Langmuir monolayer and fabrication of LB films. This chapter also describes the various techniques used for the characterization of the LB films, i.e Atomic Force Microscopy (AFM) and Fourier Transform Infrared (FTIR) spectroscopy. In Chapter 3, immobilization and imaging of protein molecules and protein DNA complexes on a LB substrate have been explored. Firstly, we describe the preparation of a Ni (II) – arachidate (NiA) monolayer and its characterization through P – A isotherm on a LB trough. Then, recombinant RNA polymerase from Escherichia coli, where the largest subunit was replaced with the same gene having a series of histidine amino acids at the C-terminus end of the protein, was immobilized over the NiA monolayer through a Ni (II) – histidine interaction. A single molecule of RNA polymerase (RNAP) could be seen through intermittent-contact AFM. Under the condition of the formation of the LB monolayer, the enzyme molecules were arrayed and transcriptionally active. Interestingly, they could pick up sequence specific DNA molecules from the subphase in an oriented fashion. In Chapter 4, the interaction between NiA and histidine tagged RNAP (HisRNAP), and RNAP and DNA were studied. LB films of Arachidic acid – NiA, NiA -HisRNAP and NiA – HisRNAP – DNA with different mole fractions were fabricated systematically. P -A isotherms were registered, and the excess Gibbs energy of mixing was calculated. The LB films were then deposited on solid supports for FTIR spectroscopic measurements. The FTIR spectra revealed the change in the amount of incorporated Ni (II) ions into the AA monolayer with the change in pH. The increase in mole fraction of RNAP and DNA in the NiA and NiA – RNAP monolayer, respectively, with their increasing concentration in the subphase are also noticed. The system developed here is robust and can be utilized to follow macromolecular interactions. In chapter 5, the Langmuir monolayer has been utilized to array a protein, Dps, specific for Fe (II) and non-specific for DNA. Dps from Mycobacterium smegmatis is known to have a cage like structure, exists in two oligomeric states, trimer and dodecamer, and can accommodate Fe (II) ions in its internal cavity. In addition, it converts Fe (II) to Fe (III), both in trimeric and dodecameric form, whereas the latter species is specific for non-specific DNA binding. We demonstrate here that, histidine tagged Dps in both oligomeric states can be immobilized on NiA LB films, where both ferroxidation and DNA binding ability remained unaffected in the ordered protein assembly. Interestingly, when Fe (II) – arachidate was used to generate a LB layer instead of NiA, Dps protein not only recognizes Fe (II) ion in the monolayer, it also converts it to Fe (III) ion in a time dependent fashion. However, once Fe (III) – Dps complex is formed and arrayed on LB monolayers, it remains very stable.

In the research presented in this licentiate thesis the surface specific technique Vibrational Sum Frequency Spectroscopy, VSFS, combined with the Langmuir trough has been utilized to investigate Langmuir monolayers and Langmuir-Blodgett (LB) deposited mono- and bilayers of phospholipids. Their molecular structure, stability, and hydration were probed to gain additional understanding of important properties aiming at facilitating the use of such layers as model systems for biological membranes. VSFS was applied to in situ studies of the degradation of Langmuir monolayers of 1,2-diacyl-phosphocholines with identical C-18 chains having various degrees of unsaturation. The time-dependent change of the monolayer area at constant surface pressure as well as the sum frequency intensity of the vinyl-CH stretch at the C=C double bonds were measured to monitor the degradation. It was shown that a rapid degradation of the monolayers of unsaturated phospholipids occurred when exposed to the laboratory air compared to the fully saturated lipid, and that the degradation could be inhibited by purging the ambient air with nitrogen. The degradation was attributed to oxidation mediated by reactive species in the air. The molecular structure and order of Langmuir monolayers of 1,2-distearoyl-phosphocholine (18:0 PC) and their hydrating water were investigated at different surface pressures using VSFS. The spectroscopic data indicated a well ordered monolayer at all surface pressures with a more intense signal at higher pressures attributed to the subsequent increase of the number density and more ordered lipid molecules due to the tighter packing. Water molecules hydrating the headgroups or being in contact with the hydrophobic parts were observed and distinguished by their vibrational frequencies, and found to have different average orientations. Additionally, monolayers of 18:0 PC, its fully deuterated analogue, and 1,2-distearoyl-phosphoserine (18:0 PS) were Langmuir-Blodgett (LB) deposited on CaF2 substrates and VSFS was used to investigate the structure and order of the films as well as the hydrating water. The CH-region, water region, and lower wavenumber region containing phosphate, ester, carboxylic acid, and amine signals were probed to obtain a complete picture of the molecule. The data indicates that all deposited monolayers formed a well ordered and stable film and the average orientation of the aliphatic chains was determined using the antisymmetric methyl stretch. / I forskningen som presenteras i denna licentiatavhandling har den ytspecifika vibrationssumfrekvensspektroskopin, VSFS, använts tillsammans med Langmuirtråget för att studera Langmuir-monolager och Langmuir-Blod-gett (LB) deponerade monolager och bilager av fosfolipider. För att utvidga förståelsen av egenskaper som är viktiga för att underlätta användandet av dem som modellsystem för biologiska membran undersöktes såväl deras molekylära struktur som stabilitet och hydratisering. VSFS användes för att genomföra in situ-studier av nedbrytningen av Langmuir-monolager av 1,2-diacyl-fosfokoliner med identiska 18 kolatomer långa sidokedjor med varierande antal omättade kol-kol-bindningar. För att övervaka nedbrytningen mättes såväl den tidsberoende förändringen av monolagernas area vid konstant yttryck som sumfrekevensintensiteten från dubbelbindningarnas CH-vibration. När monolagerna bestående av omättade fosfolipider utsattes för laboratorieluften bröts de ner hastigt jämfört med det helt mättade monolagret. Denna nedbrytning som sannolikt orsakades av reaktiva ämnen i luften kunde inhiberas fullständigt genom att ersätta den omgivande luften med kvävgas. Den molekylära strukturen och ordningen hos Langmuir-monolager av 1,2-distearoyl-fosfokolin (18:0 PC) och deras hydratiseringsvatten undersöktes vid olika yttryck med VSFS. Den spektroskopiska datan visar att monolagerna är välordnade vid alla yttryck samt att sumfrekvenssignalens styrka ökar med ökande yttryck på grund av såväl det större antalet molekyler per ytenhet som den högre ordningen då molekylerna packas tätare. Vattenmolekyler som hydratiserar huvudgrupperna eller är i kontakt med hydrofoba delar och har olika medelorientering observerades och kunde identifieras genom sina vibrationsfrekvenser. Vidare deponerades monolager av 18:0 PC, dess fullt deuterade analog och 1,2-distearoyl-fofsfoserin (18:0 PS) på substrat av CaF2 och VSFS användes för att undersöka filmernas struktur och ordning såväl som hydratiseringsvattnet. CH- och vattenregionerna samt lågvågtalsområdet som innehåller fosfat-, ester-, karboxylsyra- och aminsignaler undersöktes för att få en fullständig bild av den molekylära strukturen. Data visar att alla deponerade monolager bildade en välordnad och stabil film och kolvätekedjornas medelorientering bestämdes med hjälp av signalen från den antisymmetriska metylvibrationen. / QC 20100924