Abstracts Photoreflectance(PR) of surface-intrinsic n+ type doped GaAs has been measured for various power densities of pumping laser.The spectra exhibited many Franz-Keldysh oscillations,where by the electric field(F) can be determined from the technique of the fast fourier transform.It is known that F's determined from PR are subjected to photovoltaic effect ,but it is difficult to estimate the strength of modulating field in the PR measurements.Hence we have investigated the relation between F and modulating field by using electroreflectance to simulate PR.In this work,the relation will be confirmed by using solely PR.Here a method was devised to obtain the strength of modulating field in the PR measurements.The photo-voltage(Vs)of the pump beam can be measured directly with a lock-in amplifier by making electrical contacts on the front and rear sides of the sample.The strengh of modulation field is equal to Vs/d due to a uniform F in the undoped layer,where d is the thickness of the undoped layer.

In this work¡Awe studied the strain effects on heavy hole (hh) and light hole (lh) bands of Zn1-xMnxSe/GaAs by photoreflectance (PR) spectroscopy . The Zn1-xMnxSe epilayers were grown on GaAs substrates by the MBE technique . There is a biaxial compressive strain exist in the epilayer, due to the different lattice constants between epilayers and substrates .The biaxial strain will shift hh and lh bands and lift the hh-lh degeneracy. In our experiment ,we found that the splitting of the hh and lh transition energies is almost lineally proportional to the Mn ion concentrations. It can be ascribed to the strain in the epilayer . We have also measured the PR of Zn0.96Mn0.04Se/GaAs at various temperatures , and analyzed the transition energy of different temperatures in terms of Varshni relation.

It is known that electroreflectance (ER) of surface-intrinsic-n+ type doped GaAs has exhibited many Franz-Keldysh oscillations to enable the application of fast Fourier transform to separate the heavy and light-hole transitions. However each peak still contains two components, which belong to F+ F/2 and F- F/2 respectively, where F is the built-in field and F is the modulating field of applied voltage (Vac). In this work, we have used a larger Vac to modulate the field, and hence the peaks can be further separated. The peak belonging to heavy hole-transition and F- F/2 can be singled out to compare with Airy function-theory.

On demand single-photon and entangled-photon sources are key building-blocks for many proposed photonic quantum technologies. For practical device applications, epitaxially grown quantum dots (QDs) are of increasing importance due to their bright photon emission with sharp line width. Particularly, they are solid-state systems and can be easily embedded within a light-emitting diode (LED) to achieve electrically driven sources. Therefore, one would expect a full-fledged optoelectronic quantum network that is running on macroscopically separated, QD-based single- and entangled-photon devices. An all-electrically operated wavelength-tunable on demand single-photon source (SPS) is demonstrated first. The device consists of a LED in the form of self-assembled InGaAs QDs containing nanomembrane integrated onto a piezoelectric crystal. Triggered single photons are generated via injection of ultra-short electrical pulses into the diode, while their energy can be precisely tuned over a broad range of about 4.8 meV by varying the voltage applied to the piezoelectric crystal. High speed operation of this single-photon emitting diode up to 0.8 GHz is demonstrated. In the second part of this thesis, a fast strain-tunable entangled-light-emitting diode (ELED) is demonstrated. It has been shown that the fine structure splitting of the exciton can be effectively overcome by employing a specific anisotropic strain field. By injecting ultra-fast electrical pulses to the diode, electrically triggered entangled-photon emission with high degree of entanglement is successfully realized. A statistical investigation reveals that more than 30% of the QDs in the strain-tunable quantum LED emit polarization-entangled photon-pairs with entanglement-fidelities up to f+ = 0.83(5). Driven at the highest operation speed ever reported so far (400 MHz), the strain-tunable quantum LED emerges as unique devices for high-data rate entangled-photon applications. In the end of this thesis, on demand and wavelength-tunable LH single-photon emission from strain engineered GaAs QDs is demonstrated. Fourier-transform spectroscopy is performed, from which the coherence time of the LH single-photon emission is studied. It is envisioned that this new type of LH exciton-based SPS can be applied to realize an all-semiconductor based quantum interface in the foreseeable distributed quantum networks.

On demand single-photon and entangled-photon sources are key building-blocks for many proposed photonic quantum technologies. For practical device applications, epitaxially grown quantum dots (QDs) are of increasing importance due to their bright photon emission with sharp line width. Particularly, they are solid-state systems and can be easily embedded within a light-emitting diode (LED) to achieve electrically driven sources. Therefore, one would expect a full-fledged optoelectronic quantum network that is running on macroscopically separated, QD-based single- and entangled-photon devices. An all-electrically operated wavelength-tunable on demand single-photon source (SPS) is demonstrated first. The device consists of a LED in the form of self-assembled InGaAs QDs containing nanomembrane integrated onto a piezoelectric crystal. Triggered single photons are generated via injection of ultra-short electrical pulses into the diode, while their energy can be precisely tuned over a broad range of about 4.8 meV by varying the voltage applied to the piezoelectric crystal. High speed operation of this single-photon emitting diode up to 0.8 GHz is demonstrated. In the second part of this thesis, a fast strain-tunable entangled-light-emitting diode (ELED) is demonstrated. It has been shown that the fine structure splitting of the exciton can be effectively overcome by employing a specific anisotropic strain field. By injecting ultra-fast electrical pulses to the diode, electrically triggered entangled-photon emission with high degree of entanglement is successfully realized. A statistical investigation reveals that more than 30% of the QDs in the strain-tunable quantum LED emit polarization-entangled photon-pairs with entanglement-fidelities up to f+ = 0.83(5). Driven at the highest operation speed ever reported so far (400 MHz), the strain-tunable quantum LED emerges as unique devices for high-data rate entangled-photon applications. In the end of this thesis, on demand and wavelength-tunable LH single-photon emission from strain engineered GaAs QDs is demonstrated. Fourier-transform spectroscopy is performed, from which the coherence time of the LH single-photon emission is studied. It is envisioned that this new type of LH exciton-based SPS can be applied to realize an all-semiconductor based quantum interface in the foreseeable distributed quantum networks.