No description available.

No description available.

No description available.

Adsorption is a ubiquitous phenomenon that plays key roles in numerous applications including molecule separation, energy storage, catalysis, and lubrications. Since adsorption is sensitive to molecular details of adsorbate molecule and adsorbent materials, it is often difficult to describe theoretically. Molecular modeling capable of resolving physical processes at atomistic scales is an effective method for studying adsorption. In this dissertation, the adsorption of small molecules in three emerging materials systems: porous liquids, room-temperature ionic liquids, and atomically sharp electrodes immersed in aqueous electrolytes, are investigated to understand the physics of adsorption as well as to help design and optimize these materials systems. Thermodynamics and kinetics of gas storage in the recently synthesized porous liquids (crown-ether-substituted cage molecules dispersed in an organic solvent) were studied. Gas molecules were found to store differently in cage molecules with gas storage capacity per cage in the following order: CO2>CH4>N2. The cage molecules show selectivity of CO2 over CH4/N2 and demonstrate capability in gas separation. These studies suggest that porous liquids can be useful for CO2 capture from power plants and CH4 separation from shale gas. The effect of adsorbed water on the three-dimensional structure of ionic liquids [BMIM][Tf2N] near mica surfaces was investigated. It was shown that water, as a dielectric solvent and a molecular liquid, can alter layering and ordering of ions near mica surfaces. A three-way coupling between the self-organization of ions, the adsorption of interfacial water, and the electrification of the solid surfaces was suggested to govern the structure of ionic liquid near solid surfaces. The effects of electrode charge and surface curvature on adsorption of N2 molecules near electrodes immersed in water were studied. N2 molecules are enriched near neutral electrodes. Their enrichment is enhanced as the electrode becomes moderately charged but is reduced when the electrode becomes highly charged. Near highly charged electrodes, the amount of N2 molecules available for electrochemical reduction is an order of magnitude higher near spherical electrodes with radius ~1nm than near planar electrodes. The underlying molecular mechanisms are elucidated and their implications for development of electrodes for electrochemical reduction of N2 are discussed. / Doctor of Philosophy / Adsorption is a ubiquitous phenomenon that plays key roles in numerous applications including molecule separation, energy storage, catalysis, and lubrications. Since adsorption is sensitive to molecular details of adsorbate molecule and adsorbent materials, it is often difficult to describe theoretically. Molecular modeling capable of resolving physical processes at atomistic scales is an effective method for studying adsorption. In this dissertation, the adsorption of small molecules in three emerging materials systems: porous liquids, room-temperature ionic liquids, and atomically sharp electrodes immersed in aqueous electrolytes, are investigated to understand the physics of adsorption as well as to help design and optimize these materials systems. Thermodynamics and kinetics of gas storage in the recently synthesized porous liquids (crown-ether-substituted cage molecules dispersed in an organic solvent) were studied. Gas molecules were found to store differently in cage molecules with gas storage capacity per cage in the following order: CO2>CH4>N2. The cage molecules show selectivity of CO2 over CH4/N2 and demonstrate capability in gas separation. These studies suggest that porous liquids can be useful for CO2 capture from power plants and CH4 separation from shale gas. The effect of adsorbed water on the three-dimensional structure of ionic liquids [BMIM][Tf2N] near mica surfaces was investigated. It was shown that water, as a dielectric solvent and a molecular liquid, can alter layering and ordering of ions near mica surfaces. vi A three-way coupling between the self-organization of ions, the adsorption of interfacial water, and the electrification of the solid surfaces was suggested to govern the structure of ionic liquid near solid surfaces. The effects of electrode charge and surface curvature on adsorption of N2 molecules near electrodes immersed in water were studied. N2 molecules are enriched near neutral electrodes. Their enrichment is enhanced as the electrode becomes moderately charged but is reduced when the electrode becomes highly charged. Near highly charged electrodes, the amount of N2 molecules available for electrochemical reduction is an order of magnitude higher near spherical electrodes with radius ~1nm than near planar electrodes. The underlying molecular mechanisms are elucidated and their implications for development of electrodes for electrochemical reduction of N2 are discussed.

Yes / Ionic liquids (ILs) are key materials for the development of a wide range of emerging technologies. Protic ionic liquids, an important class of ILs, have long been envisioned as promising anhydrous electrolytes for fuel cells. It is well known that in comparison to all other cations, protons exhibit abnormally high conductivity in water. Such superprotonic dynamics was expected in protic ionic conductors as well. However, many years of extensive studies led to the disappointing conclusion that this is not the case and most protic ionic liquids display subionic behavior. Therefore, the relatively low conductivity seems to be the main obstacle for the application of protic ionic liquids in fuel cells. Using dielectric spectroscopy, herein we report the observation of highly decoupled conductivity in a newly synthesized protic ionic conductor. We show that its proton transport is strongly decoupled from the structural relaxation, in terms of both temperature dependence and characteristic rates. This finding offers a fresh look on the charge transport mechanism in PILs and also provides new ideas for design of anhydrous materials with exceptionally high proton conductivity. / National Science Centre within the framework of the Opus project (Grant No. DEC 2011/03/B/ST3/02072). Financial assistance from FNP START. The LDRD Program of ORNL, managed by UT-Battelle, LLC, for the U.S. DOE. Support from the NSF under grant CHE-1213444.

The understanding of complex condensed matter systems is an area of intense study. In this thesis, some properties of simple liquids with strong preference for tetrahedral local ordering are explored. These liquids are amenable to supercooling, and give complex crystalline structures on eventual crystallisation. All liquids studied are simple, monatomic and are similar to real metallic liquids. The vibrational density of states of a glass created in simulation is calculated. We show a correspondence between the vibrational properties of the crystal and the glass, indicating that the vibrational spectra of crystals can be used to understand the more complex vibrational spectra of the glass of the same substance. The dynamics of supercooled liquids is investigated using a previously not implemented comprehensive measure of structural relaxation. This new measure decays more slowly in the deeply supercooled domain than the commonly used measure. A new atomic model for octagonal quasicrystals is presented. The model is based on findings from a molecular dynamics simulation that resulted in 45˚ twinned β-Mn. A decoration is derived from the β-Mn unit cell and the unit cell of the intermediate structure found at the twinning interface. Extensive simulations are used to explore the phase diagram of a liquid at low densities. The resulting phase diagram shows a spinodal line and a phase coexistence region between a liquid and a crystalline phase ending in a critical point. This contradicts the old conclusion of the Landau theory -- that continuous transitions between liquids and crystals cannot exist The same liquid is explored at higher densities. Upon cooling the liquid performs a first order liquid-liquid phase transition. The low temperature liquid is shown to be strong and to have very good glass forming abilities. This result offers new insights into fragile to strong transitions and suggests the possibility of a good metallic glass former. / At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Submitted. Paper 3: In progress.

The current societal needs for fuels and chemical commodities strongly depend on fossil resources. This dependence can lead to economic instabilities, political problems and insecurity of supplies. Moreover, global warming, which is associated with the massive use of fossil resources, is a dramatic “collateral damage” that endangers the future of the planet. Biomass is the main renewable source available today that can, produce various liquid, gaseous and solid products. Due to their lignocellulosic origin are considered CO2 neutral and thus can generate CO2 credits. Biomass processing can meet to the challenge of reducing of fossil resources by producing a liquid feedstock that can lessen the “fossil dependence” and /or meet the increased demand via a rapidly emerging thermochemical technology: pyrolysis. The ultimate goal of this process is to produce liquid with improved properties that could directly be used as liquid fuel, fuel additive and/or feedstock in modern oil refineries and petrochemical complexes. However, the liquids derived from biomass thermal processing are problematic with respect to their handling and end use applications. Thus, alternative routes of advanced liquid feedstock production are needed. Heterogeneous catalysis has long served the oil refining and petrochemical industries to produce a wide range of fuels and products. The combination of biomass pyrolysis and heterogeneous catalysis (by bringing in contact the produced vapours/liquids with suitable catalysts) is a very promising route. In this dissertation, the exploitation of biomass to produce of liquid feedstock via pyrolysis over a multifunctional catalyst and in a steam atmosphere is investigated.  Steam pyrolysis in a fixed bed reactor demonstrated that steam can be considered a reactive agent even at lower temperatures affecting the yields and the composition of all the products. The devolatilisation accelerates and the amount of final volatile matter in the char. Fast pyrolysis in the presence of steam results in improved and controlled thermal decomposition of the biomass; higher liquid yields and slightly deoxygenated liquid products are also obtained. Steam pyrolysis over a bi-metallic Ni-V catalyst can produce liquids of improved quality (lower O content) and also provide routes for selective deoxygenation. However, a decrease in liquid yield was observed. The combination of metal and acid catalysts (Ni-V/HZSM5) shows enhanced deoxygenation activity and increased H preservation in the produced liquid. The final O content in the liquid was 12.83wt% at a zeolite (HZSM5) loading of~75wt%; however, the yield of the obtained liquid was substantially decreased. Moreover, increased coke formation on the catalyst was observed at highest zeolite rate. The increased catalyst space time (τ) results in a lower liquid yield with reduced oxygen (7.79 wt% at τ =2h) and increased aromatic content. The coke deposited per unit mass of catalyst is lower for longer catalyst space times, while the char yield seems to be unaffected. The evaluation of the stability of the hybrid catalyst showed no significant structural defects and activity loss when the catalyst was regenerated at a low temperature (550οC). / Det nuvarande samhällets behov av bränslen och kemiska produkter är starkt knutet till fossila resurser. Detta beroende kan leda till ekonomisk instabilititet, politiska svårigheter och osäker leveranssäkerhet. Dessutom riskeras allvarliga skador i framtiden på grund av global uppvärmning, vilket är relaterat till det ökande och massiva användandet av fossila bränslen.   Biomassa är en förnybar resurs som är tillgänglig idag, möjlig att utnyttja för produktion av diverse flytande, gasformiga och fasta produkter. Dessa produkter, beroende på biogeniskt ursprung, betraktas som koldioxidneutrala och kan därför generera koldioxidkrediter. Processande av biomassa kan möta utmaningen av minskad fossilbränsleanvändning, genom produktion av flytande råvara som kan reducera beroendet och/eller möta ökad efterfrågan, via en snabbt expanderande termokemisk teknik - pyrolys.    Det slutgiltiga målet med en sådan process är att producera en flytande produkt med förbättrade egenskaper som direkt skulle kunna användas som flytande bränslen, bränsleadditiv och/eller som råmaterial i moderna oljeraffinaderier och petrokemiska komplex. Vätskor som utvinns från termiska processer är problematiska med avseende på hantering och slutanvändningen i olika applikationer, därmed behövs olika spår för produktion av avancerade flytande råvaror. Heterogena katalysen har länge tjänat raffinaderi- och petrokemisk industri, som producerar ett brett utbud av bränslen och produkter, lämpliga för säker användning. Kombinationen av biomassapyrolys och heterogen katalys  (genom att bringa pyrolysångorna i kontakt med en lämplig katalysator) är ett väldigt lovande spår. I denna avhandling undersöks användningen av biomassa för produktion av flytande råvara, via pyrolys över en flerfunktionel katalysator i ångatmosfär. Ångpyrolys i en fastbäddsreaktor visade att ånga kan betraktas som ett reaktivt medium,  även vid låga temperaturer, som påverkar utbyten och sammansättning av alla produkter. Avgasningen sker snabbare och den slutliga flykthalten i kolresterna blir lägren vid användning av ånga. Snabbpyrolys i ångatmosfär resulterar i förbättrad och mer kontrollerad termisk nedbrytning av biomassa, vilket ger ett högre vätskeutbyte och en något deoxygenerad flytande produkten. ångpyrolys i kombination med bimetalliska NiV-katalysatorer, ger upphov till en flytande råvara med förbättrad kvalitet och selektiv deoxygenering. Dock med ett minskande utbyte som följd. Kombinationen av metall och en sur katalysator (Ni-V/HZSM5) visade förstärkt deoxygenering med bibehållen vätehalt i den flytande produkten. Den slutliga syrehalten i vätskan var 12.83 vikt% vid en zeolithalt (HZSM5) på 75 vikt%, dock med ett kraftigt minskande vätskeutbyte. Dessutom noterades ökad koksbildning på katalysatormaterialet med den högsta zeolithalten. Ökad rymd-tid  för katalysatorn (τ) ger ett lägre vätskeutbyte med reducerad syrehalt (7.79 vikt% vid τ=2h) och ökad aromathalt. Koksbildning på ytan, per massenhet katalysatormaterial, minskade vid längre rymd-tider medan utbytet av kolrester förblev opåverkat.  Undersökningen av stabiliteten hos hybridkatalysatorn visade inga strukturella defekter och ingen signifikant minskad aktivitet efter regenerering vid låg temperatur (550οC). / Οι σύγχρονες ανάγκες της κοινωνίας για παραγωγή υγρών καυσίμων και χημικών προϊόντων εξαρτώνται από τους ορυκτούς πόρους. Αυτή η εξάρτηση μπορεί να οδηγήσει σε οικονομικά προβλήματα, πολιτκή αστάθεια, όπως επίσης και αβεβαιότητα στις προμήθειες της ενεργειακής εφοδιαστικής αλυσίδας. Επιπροσθέτως, μια δραματική «παράπλευρη απώλεια» η οποία θέτει σε κίνδυνο το μέλλον του πλανήτη είναι η υπερθέρμανσή του, η οποία έχει συσχετισθεί με την εκτεταμένη χρήση ορυκτών πόρων. Σήμερα, η βιομάζα είναι η μόνη ανανεώσιμη πηγή από την οποία μπορούν να παραχθούν υγρά, αέρια και στερεά προϊόντα, που λόγω της λιγνοκυταρρινικής τους προελεύσεως, η συνεισφορά τους στις εκομπές CO2 θεώρειται μηδενική. Η θερμοχημική επεξεργασία της βιομάζας συνεισφέρει στον περιορισμό της χρήσης ορυκτών πόρων, με την παραγωγή υγρών προϊόντων, τα οποία μπορούν να μειώσουν την εξάρτηση ή /και την αυξημένη ζήτηση μέσω μιας ταχέως αναπτυσόμενης τεχνολογίας, της πυρόλυσης. Στόχος της διεργασίας είναι η παραγωγή υγρών προϊόντων με ιδιότητες, που επιτρέπουν την απευθείας χρήση τους ως υγρά καύσιμα ή ως πρώτη ύλη, για την παραγώγη χημικών προϊόντων σε συγχρονες μονάδες διύλισης πετρελαίου και σε πετροχημικά συγκτροτήματα. Εν τούτοις, τα υγρά προϊόντα της θερμικής διάσπασης (πυρόλυση) είναι προβληματικά στη διαχείρηση και στις τελικές τους εφαρμογές, λόγω της σύστασής τους. Ως εκ τούτου, απαιτούνται νέες τεχνικές για παραγωγή προηγμένων υγρών προοϊόντων. Η ετερογενής κατάλυση έχει επιτυχώς εφαρμοσθεί στην πετρελαϊκή και χημική βιομηχανία, παράγοντας ένα μεγάλο εύρος προϊόντων. Ο συνδυασμός της με την πυρόλυση (φέρνοντας σε επαφη τα υγρά/ατμούς με κατάλληλο καταλύτη) αποτελεί μια πολλά υποσχόμενη ενναλακτική. Στην παρούσα διατριβή μελετάται η αξιοποίηση βιομάζας για παραγωγή υγρών προϊόντων μέσω καταλυτικής πυρόλυσης, με χρήση πολυλειτουρικού καταλύτη (multi-functional catalyst) υπό την παρουσία ατμού. Η χρήση ατμου κατά τη διαρκειά πυρόλυσης βιομαζας σε αντιδραστήρα σταθερής κλίνης, μεταβάλει τη σύσταση των επιμέρους προϊόντων. Η παρουσία ατμού έχει ως αποτέλεσμα την ταχύτερη αποπτητικοποίηση του υλικού, ενώ παράλληλα η περιεκτικότητα του υπολειπόμενου εξανθρακώματος σε πτητικά είναι μικρότερη. Τα πειραματικά αποτελέσματα ταχείας πυρόλυσης σε αντιδραστήρα ρευστοστερεάς κλίνης δείχνουν ό,τι η χρήση ατμού βελτιώνει την θερμική διάσπαση της βιομαζας, αυξάνοντας την απόδοση σε υγρά προϊοντά, ενώ παράλληλα βοηθάει στην αποξυγόνωσή τους. Ο συνδυασμός της πυρόλυσης υπό την παρουσία ατμού και διμεταλλικού καταλύτη νικελίου–βαναδίου μπορεί να  βελτιώσει την ποιότητα των παραγόμενων υγρών (αποξυγόνωση) με παραλλήλη μείωση της απόδοσής τους, ενώ μπορεί να  παράγει προϊόντα εκλεκτικής αποξυγόνωσης. Συνδυασμός μεταλλικών και ζεολιθικών καταλυτών (Ni-V/HZSM5) εμφανίζει βελτιωμένη δραστικότητα στις αντιδράσεις αποξυγόνωσης, με παράλληλη συγκράτηση υδρογόνου (Η) στα υγρά προϊόντα. Η τελική περιεκτικότητα των υγρών προϊόντων σε οξυγόνου (Ο) μετά από 90 min αντίδρασης είναι 12.83 wt%, με περιεκτικότητα ζεόλιθου (ΗZSΜ5) ~75 wt% στον καταλύτη. Ωστόσο, η αυξηση της περεικτικότητας σε ζεόλιθο έχει ως αποτέλεσμα την αύξηση των επικαθήσεων άνθρακα επάνω στον κατάλυτη, καθώς και την σημαντική μειώση της απόδοσης των υγρών προϊόντων (24.35wt% επι ξηρής βιομάζας).  Η αύξηση του χώρου χρόνου του καταλύτη (τ) έχει ως αποτέλεσμα: τη μείωση των υγρών προϊόντων, τη μείωση του περιεχόμενου Ο στα υγρά προϊόντα (7.79 wt% at τ =2h), την αύξηση των αρωματικών υδρογονανθράκων και τη μείωση του επικαθήμενου κωκ ανά μονάδα μάζας καταλύτη. Η απόδοση του εξανθρακώματος παρέμεινε πρακτικά αμετάβλητη. Η αναγέννηση του υβριδικού καταλύτη σε χαμηλές θερμοκρασιές (550οC) δεν επέφερε σημαντικές δομικές αλλαγές και απώλεια δραστικότητας. / <p>QC 20140306</p>

This thesis presents a compendium of work on superheated liquid releases. Superheated liquid releases are often subject to flashing. Nucleation has been identified as an important process in the early stage of flashing. The presence of strong nucleation and therefore flashing depends on the output of the balance of the promoting forces and dissipation forces inside the fluid released. A one dimensional model to classify the type of jet to be formed after the release has been developed based on the balance of these forces. The analysis is based on the assumption that the nucleation process can be modelled as a second order damped system. The model parameters are defined as a function of the pressure, temperature, fluid properties and geometric characteristic of the system. The results obtained have good agreement with the experimental results available for releases of different fluids, including both hydrocarbons and water. The calculation of the velocity discharge, void fraction and mass flow of a flashing jet generated after the release is made based on the thermodynamics jump formulation approach. Due to the nature of the nucleation process, the assumptions of adiabatic flow with non reversible work for the surface tension forces are made. Those considerations are found to be more realistic that the isentropic condition used until now by different authors. Numerical techniques are only applied after the flashing jet is formed, no droplets generation or vapour generation are included. Droplets are imposed as part of the boundary conditions of a gas jet. Droplets transport mechanics and momentum exchange with the gas current is made using Droplet Disperse Model (DDM) on the commercial code Fluent Ò. DDM determines the distribution of the disperse phase over the continuous phase using a Lagrangian Eulerian approach. The influence of velocity, the dimension of the nozzle and mass flow used in the CFD modelling were analysed. Nozzle dimensions have a large impact on the core region length of the velocity profile. The k −e turbulent model was used. As expected, the numerical results do approach experimental values in the far region, suggesting that the momentum of the two phase jet is conserved. The one dimensional model thus provides the necessary boundary conditions for the application of numerical methods to superheated liquid releases including flashing.

Different scenarios for assembling rod-like and spherical colloidal particles using binary mixtures of partially miscible liquids were investigated experimentally. Suitable rod-like colloids were developed first. The subsequent studies of colloids in binary liquids consisted, on one hand, of systems where particles were partially wetted by both phases and, on the other hand, of systems where particles were completely wetted by the minority phase. A simple method to prepare large quantities of micrometer-sized akagan eite-silica core-shell rods was developed. These were proven to be very versatile, with the possibility of modifying their properties on different levels. The aspect ratio is simply controlled by a gradual growth of the silica shells. From them, hollow silica rods and rods with an increased responsiveness to a magnetic field could be obtained in straightforward ways. Bijels were prepared by trapping rod-like particles on a percolating liquid-liquid interface. The familiar bicontinuous organization of liquid domains was observed after structural arrest. At a fixed volume per particle it is demonstrated that for rod-like particles the domain size decreases faster with increasing quantity of particles than in the case of spherical particles. Additionally, the packing of the rods at the interface was elucidated, revealing several characteristic features. In particle-stabilized droplet emulsions rapid evaporation of the continuous phase and eventual full mixing of the liquid phases can leave a cellular network of particles. The formation and eventual stability of these networks were investigated in detail with confocal microscopy. When colloids are completely wetted by the minority component of an asymmetric binary mixture there can be substantial temperature and composition regimes outside the binodal where shear-induced aggregation can take place. This happens as adsorbed layers present at the particle surfaces coalesce and bind particles through a liquid bridge. Depending on particle concentration, percolating networks can form of rods wetted by the minority phase after temperature quenching such a system just across the binodal.

No description available.